-- wizard rewrite wip local uci = require "luci.model.uci".cursor() local sys = require "luci.sys" local util = require "luci.util" local ip = require "luci.ip" local community = "profile_" .. (uci:get("freifunk", "community", "name") or "Freifunk") local mesh_network = ip.IPv4(uci:get_first(community, "community", "mesh_network") or "10.0.0.0/8") local community_ipv6 = uci:get_first(community, "community", "ipv6") or 0 local community_ipv6mode = uci:get_first(community, "community", "ipv6_config") or "static" local meshkit_ipv6 = uci:get("meshwizard", "ipv6", "enabled") or 0 local community_vap = uci:get_first(community, "community", "vap") or 0 m = Map("meshwizard", translate("Wizard"), translate("This wizard will assist you in setting up your router for Freifunk " .. "or another similar wireless community network.")) n = m:section(NamedSection, "netconfig", nil, translate("Interfaces")) n.anonymous = true -- common functions function cbi_configure(device) local configure = n:taboption(device, Flag, device .. "_config", translate("Configure this interface"), translate("Note: this will set up this interface for mesh operation, i.e. add it to zone 'freifunk' and enable olsr.")) end function cbi_ip4addr(device) local ip4addr = n:taboption(device, Value, device .. "_ip4addr", translate("Mesh IP address"), translate("This is a unique address in the mesh (e.g. 10.1.1.1) and has to be registered at your local community.")) ip4addr:depends(device .. "_config", 1) ip4addr.datatype = "ip4addr" function ip4addr.validate(self, value) local x = ip.IPv4(value) if mesh_network:contains(x) then return value else return nil, translate("The given IP address is not inside the mesh network range ") .. "(" .. mesh_network:string() .. ")." end end end function cbi_ip6addr(device) local ip6addr = n:taboption(device, Value, device .. "_ip6addr", translate("Mesh IPv6 address"), translate("This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and has to be registered at your local community.")) ip6addr:depends(device .. "_config", 1) ip6addr.datatype = "ip6addr" end function cbi_dhcp(device) local dhcp = n:taboption(device, Flag, device .. "_dhcp", translate("Enable DHCP"), translate("DHCP will automatically assign ip addresses to clients")) dhcp:depends(device .. "_config", 1) dhcp.rmempty = true end function cbi_ra(device) local ra = n:taboption(device, Flag, device .. "_ipv6ra", translate("Enable RA"), translate("Send router advertisements on this device.")) ra:depends(device .. "_config", 1) ra.rmempty = true end function cbi_dhcprange(device) local dhcprange = n:taboption(device, Value, device .. "_dhcprange", translate("DHCP IP range"), translate("The IP range from which clients are assigned ip addresses (e.g. 10.1.2.1/28). " .. "If this is a range inside your mesh network range, then it will be announced as HNA. Any other range will use NAT. " .. "If left empty then the defaults from the community profile will be used.")) dhcprange:depends(device .. "_dhcp", "1") dhcprange.rmempty = true dhcprange.datatype = "ip4addr" end -- create tabs and config for wireless local nets={} uci:foreach("wireless", "wifi-device", function(section) local device = section[".name"] table.insert(nets, device) end) local wired_nets = {} uci:foreach("network", "interface", function(section) local device = section[".name"] if not util.contains(nets, device) and device ~= "loopback" and not device:find("wireless") then table.insert(nets, device) table.insert(wired_nets, device) end end) for _, net in util.spairs(nets, function(a,b) return (nets[a] < nets[b]) end) do n:tab(net, net) end -- create cbi config for wireless uci:foreach("wireless", "wifi-device", function(section) local device = section[".name"] local hwtype = section.type local syscc = section.country or uci:get(community, "wifi_device", "country") or uci:get("freifunk", "wifi_device", "country") cbi_configure(device) -- Channel selection if hwtype == "atheros" then local cc = util.trim(sys.exec("grep -i '" .. syscc .. "' /lib/wifi/cc_translate.txt |cut -d ' ' -f 2")) or 0 sys.exec('"echo " .. cc .. " > /proc/sys/dev/" .. device .. "/countrycode"') elseif hwtype == "mac80211" then sys.exec("iw reg set " .. syscc) elseif hwtype == "broadcom" then sys.exec ("wlc country " .. syscc) end local chan = n:taboption(device, ListValue, device .. "_channel", translate("Channel"), translate("Your device and neighbouring nodes have to use the same channel.")) chan:depends(device .. "_config", 1) chan:value('default') local iwinfo = sys.wifi.getiwinfo(device) if iwinfo and iwinfo.freqlist then for _, f in ipairs(iwinfo.freqlist) do if not f.restricted then chan:value(f.channel) end end end -- IPv4 address cbi_ip4addr(device) -- DHCP enable cbi_dhcp(device) -- DHCP range cbi_dhcprange(device) -- IPv6 addr and RA if community_ipv6 == "1" then if community_ipv6mode == "static" then cbi_ip6addr(device) end cbi_ra(device) end -- Enable VAP local supports_vap = 0 if sys.call("/usr/bin/meshwizard/helpers/supports_vap.sh " .. device .. " " .. hwtype) == 0 then supports_vap = 1 end if supports_vap == 1 then local vap = n:taboption(device, Flag, device .. "_vap", translate("Virtual Access Point (VAP)"), translate("This will setup a new virtual wireless interface in Access Point mode.")) vap:depends(device .. "_dhcp", "1") vap.rmempty = true if community_vap == "1" then vap.default = "1" end end end) for _, device in pairs(wired_nets) do cbi_configure(device) cbi_ip4addr(device) cbi_dhcp(device) cbi_dhcprange(device) -- IPv6 addr and RA if community_ipv6 == "1" then if community_ipv6mode == "static" then cbi_ip6addr(device) end cbi_ra(device) end end -- General settings g = m:section(TypedSection, "general", translate("General Settings")) g.anonymous = true local cleanup = g:option(Flag, "cleanup", translate("Cleanup config"), translate("If this is selected then config is cleaned before setting new config options.")) cleanup.default = "1" local restrict = g:option(Flag, "local_restrict", translate("Protect LAN"), translate("Check this to protect your LAN from other nodes or clients") .. " (" .. translate("recommended") .. ").") local share = g:option(Flag, "sharenet", translate("Share your internet connection"), translate("Select this to allow others to use your connection to access the internet.")) share.rmempty = true -- IPv6 config if community_ipv6 == "1" then v6 = m:section(NamedSection, "ipv6", nil, translate("IPv6 Settings")) local enabled = v6:option(Flag, "enabled", translate("Enabled"), translate("Activate or deactivate IPv6 config globally.")) enabled.default = meshkit_ipv6 enabled.rmempty = false end return m