c_thanksto = 'Thanks To'
a_i_i_hello = 'Hello!'
a_i_i_admin1 = 'This is the administration area of <abbr title="Lua Configuration Interface">LuCI</abbr>.'
-a_i_i_admin2 = '<abbr title="Lua Configuration Interface">LuCI</abbr> is a free, flexible, and user friendly graphical interface for configuring OpenWRT Kamikaze.'
+a_i_i_admin2 = '<abbr title="Lua Configuration Interface">LuCI</abbr> is a free, flexible, and user friendly graphical interface for configuring OpenWrt Kamikaze.'
a_i_i_admin3 = 'On the following pages you can adjust all important settings of your router.'
a_i_i_admin4 = 'Notice: In <abbr title="Lua Configuration Interface">LuCI</abbr> changes have to be confirmed by clicking Changes - Save & Apply before being applied.'
a_i_i_admin5 = 'As we are always want to improve this interface we are looking forward to your feedback and suggestions.'
a_s_desc = 'Here you can configure the basic aspects of your device like its hostname or the timezone.'
a_s_packages = 'Software'
a_s_changepw = 'Admin Password'
-a_s_p_ipkg = 'IPKG-Configuration'
+a_s_p_ipkg = 'OPKG-Configuration'
a_s_sshkeys = '<abbr title="Secure Shell">SSH</abbr>-Keys'
a_s_fstab = 'Mount Points'
a_s_flash = 'Flash Firmware'
a_s_fstab_swap1 = 'If your physical memory is insufficient unused data can be temporarily swapped to a swap-device resulting in a higher amount of usable <abbr title="Random Access Memory">RAM</abbr>. Be aware that swapping data is a very slow process as the swap-device cannot be accessed with the high datarates of the <abbr title="Random Access Memory">RAM</abbr>.'
a_s_flash_flashed = 'Firmware successfully flashed. Rebooting device...'
a_s_flash_flasherr = 'Failed to flash'
-a_s_flash_fwimage = 'Firmwareimage'
+a_s_flash_fwimage = 'Firmware image'
a_s_flash_received = 'Image received. About to start flashing process. DO NOT POWER OFF THE DEVICE!'
a_s_flash_inprogress = 'Writing firmware...'
a_s_flash_fwupgrade = 'Flash Firmware'
dhcp_dnsmasq_dhcpleasemax = '<abbr title="maximal">max.</abbr> <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr>-Leases'
dhcp_dnsmasq_addnhosts = 'additional hostfile'
dhcp_dnsmasq_queryport = 'query port'
+dhcp_dnsmasq_enabletftp = 'Enable TFTP-Server'
+dhcp_dnsmasq_tftproot = 'TFTP-Server Root'
+dhcp_dnsmasq_dhcpboot = 'Network Boot Image'
a_n_switch = 'Switch'
+a_n_conntrack = 'Active Connections'
+a_n_conntrack_desc = 'This page gives an overview over currently active network connections.'
a_n_routes = 'Routes'
+a_n_routes4 = 'IPv4 Routes'
+a_n_routes6 = 'IPv6 Routes'
a_network1 = 'In this area you find all network-related settings.'
a_network2 = 'On most routers the network switch can be freely configured and splitted up into several <abbr title="Virtual Local Area Network">VLAN</abbr>s.'
a_network3 = 'Interfaces and <abbr title="Point-to-Point Protocol over Ethernet">PPPoE</abbr> / <abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Settings allow a custom organisation of the network and connections to other networks like the internet.'
dhcp_leases_active = 'Active Leases'
a_n_ptp = 'Point-to-Point Connections'
a_n_ptp1 = 'Point-to-Point connections with <abbr title="Point-to-Point Protocol over Ethernet">PPPoE</abbr> or <abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr> are often used to connect a device over <abbr title="Digital Subscriber Line">DSL</abbr> or similar technologies to an internet access point.'
+network_interface_prereq = 'You need to install "comgt" for UMTS/GPRS, "ppp-mod-pppoe" for PPPoE, "ppp-mod-pppoa" for PPPoA or "pptp" for PPtP support'
+network_interface_prereq_mini = 'You need to install "ppp-mod-pppoe" for PPPoE or "pptp" for PPtP support'
network_interface_server = '<abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Server'
network_interface_demand = 'Automatic Disconnect'
network_interface_demand_desc = 'Time (in seconds) after which an unused connection will be closed'
network_interface_keepalive = 'Keep-Alive'
network_interface_keepalive_desc = 'Number of failed connection tests to initiate automatic reconnect'
+network_interface_device = 'Modem device'
+network_interface_device_desc = 'The device node of your modem, e.g. /dev/ttyUSB0'
+network_interface_defaultroute = 'Replace default route'
+network_interface_defaultroute_desc = 'Let pppd replace the current default route to use the PPP interface after successful connect'
+network_interface_peerdns = 'Use peer DNS'
+network_interface_peerdns_desc = 'Configure the local DNS server to use the name servers adverticed by the PPP peer'
+network_interface_ipv6 = 'Enable IPv6 on PPP link'
+network_interface_connect = 'Connect script'
+network_interface_connect_desc = 'Let pppd run this script after establishing the PPP link'
+network_interface_disconnect = 'Disconnect script'
+network_interface_disconnect_desc = 'Let pppd run this script before tearing down the PPP link'
+network_interface_pppd_options = 'Additional pppd options'
+network_interface_pppd_options_desc = 'Specify additional command line arguments for pppd here'
+network_interface_apn = 'Access point (APN)'
+network_interface_pincode = 'PIN code'
+network_interface_pincode_desc = 'Make sure that you provide the correct pin code here or you might lock your sim card!'
+network_interface_service = 'Service type'
+network_interface_maxwait = 'Setup wait time'
+network_interface_maxwait_desc = 'Seconds to wait for the modem to become ready before attempting to connect'
a_n_r_routes1 = 'Routes specify over which interface and gateway a certain host or network can be reached.'
a_n_routes_static = 'Static Routes'
+a_n_routes_static4 = 'Static IPv4 Routes'
+a_n_routes_static6 = 'Static IPv6 Routes'
a_n_routes_kernel4 = 'Active <abbr title="Internet Protocol Version 4">IPv4</abbr>-Routes'
-a_n_r_target1 = 'host-<abbr title="Internet Protocol Address">IP</abbr> or network'
+a_n_routes_kernel6 = 'Active <abbr title="Internet Protocol Version 6">IPv6</abbr>-Routes'
+a_n_r_target1 = 'Host-<abbr title="Internet Protocol Address">IP</abbr> or Network'
+a_n_r_target6 = '<abbr title="Internet Protocol Version 6">IPv6</abbr>-Address or Network (CIDR)'
a_n_r_netmask1 = 'if target is a network'
m_n_inet = 'Internet Connection'
m_n_local = 'Local Network'
projects / project / luci.git / blobdiff