-uci_applied = "The following changes have been applied"
-uci_reverted = "The following changes have been reverted"
-
-a_i_ui = "User Interface"
-
-c_lucidesc = [[LuCI is a collection of free Lua software including an MVC-Webframework and webinterface for embedded devices.
-Luci is licensed under the Apache-License.]]
-c_projecthome = "Project Homepage"
-c_leaddev = "Lead Development"
-c_contributors = "Contributing Developers"
-c_thanksto = "Thanks To"
-
-a_i_i_hello = "Hello!"
-a_i_i_admin1 = "This is the administration area of LuCI."
-a_i_i_admin2 = "LuCI is a free, flexible, and user friendly graphical interface for configuring OpenWRT Kamikaze."
-a_i_i_admin3 = "On the following pages you can adjust all important settings of your router."
-a_i_i_admin4 = [[Notice: In LuCI changes have to be confirmed by clicking Changes - Apply before being applied.]]
-a_i_i_admin5 = [[As we are always want to improve this interface we are looking forward
-to your feedback and suggestions.]]
-a_i_i_admin6 = "And now have fun with your router!"
-a_i_i_team = "The LuCI Team"
-
-a_i_luci1 = "Here you can customize the settings and the functionality of LuCI."
-a_i_ucicommit = "Post-commit actions"
-a_i_ucicommit1 = [[These commands will be executed automatically when a given UCI configuration is committed allowing
-changes to be applied instantly.]]
-a_i_keepflash = "Files to be kept when flashing a new firmware"
-a_i_keepflash1 = "When flashing a new firmware with LuCI these files will be added to the new firmware installation."
-
-a_st_i_status1 = [[Here you can find information about the current system status like CPU clock frequency, memory
-usage or network interface data.]]
+uci_applied = [[The following changes have been applied]]
+uci_reverted = [[The following changes have been reverted]]
+a_i_ui = [[User Interface]]
+c_lucidesc = [[<abbr title="Lua Configuration Interface">LuCI</abbr> is a collection of free Lua software including an <abbr title="Model-View-Controller">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr title="Lua Configuration Interface">LuCI</abbr> is licensed under the Apache-License.]]
+c_projecthome = [[Project Homepage]]
+c_leaddev = [[Lead Development]]
+c_contributors = [[Contributing Developers]]
+c_thanksto = [[Thanks To]]
+a_i_i_hello = [[Hello!]]
+a_i_i_admin1 = [[This is the administration area of <abbr title="Lua Configuration Interface">LuCI</abbr>.]]
+a_i_i_admin2 = [[<abbr title="Lua Configuration Interface">LuCI</abbr> is a free, flexible, and user friendly graphical interface for configuring OpenWRT Kamikaze.]]
+a_i_i_admin3 = [[On the following pages you can adjust all important settings of your router.]]
+a_i_i_admin4 = [[Notice: In <abbr title="Lua Configuration Interface">LuCI</abbr> changes have to be confirmed by clicking Changes - Apply before being applied.]]
+a_i_i_admin5 = [[As we are always want to improve this interface we are looking forward to your feedback and suggestions.]]
+a_i_i_admin6 = [[And now have fun with your router!]]
+a_i_i_team = [[The <abbr title="Lua Configuration Interface">LuCI</abbr> Team]]
+a_i_luci1 = [[Here you can customize the settings and the functionality of <abbr title="Lua Configuration Interface">LuCI</abbr>.]]
+a_i_ucicommit = [[Post-commit actions]]
+a_i_ucicommit1 = [[These commands will be executed automatically when a given <abbr title="Unified Configuration Interface">UCI</abbr> configuration is committed allowing changes to be applied instantly.]]
+a_i_keepflash = [[Files to be kept when flashing a new firmware]]
+a_i_keepflash1 = [[When flashing a new firmware with <abbr title="Lua Configuration Interface">LuCI</abbr> these files will be added to the new firmware installation.]]
+a_st_i_status1 = [[Here you can find information about the current system status like <abbr title="Central Processing Unit">CPU</abbr> clock frequency, memory usage or network interface data.]]
a_st_i_status2 = [[Also kernel or service logfiles can be viewed here to get an overview over their current state.]]
-
-iwscan = "WLAN-Scan"
-iwscan1 = "Wifi networks in your local environment"
-iwscan_encr = "Encr."
-iwscan_link = "Link"
-iwscan_signal = "Signal"
-iwscan_noise = "Noise"
-
-routes = "Routes"
-routes_netmask = "Netmask"
-routes_gateway = "Gateway"
-routes_metric = "Metric"
-
-a_s_desc = "Here you can configure the basic aspects of your device like its hostname or the timezone."
-a_s_packages = "Software"
-a_s_changepw = "Admin Password"
-a_s_p_ipkg = "IPKG-Configuration"
-a_s_sshkeys = "SSH-Keys"
-a_s_fstab = "Mount Points"
-a_s_flash = "Flash Firmware"
-
-a_s_i_system1 = [[Change settings related to the system itself, its identification,
-installed hard- and software, authentication or mount points.]]
+iwscan = [[<abbr title="Wireless Local Area Network">WLAN</abbr>-Scan]]
+iwscan1 = [[Wifi networks in your local environment]]
+iwscan_encr = [[<abbr title="Encrypted">Encr.</abbr>]]
+iwscan_link = [[Link]]
+iwscan_signal = [[Signal]]
+iwscan_noise = [[Noise]]
+routes = [[Routes]]
+routes_netmask = [[Netmask]]
+routes_gateway = [[Gateway]]
+routes_metric = [[Metric]]
+a_s_desc = [[Here you can configure the basic aspects of your device like its hostname or the timezone.]]
+a_s_packages = [[Software]]
+a_s_changepw = [[Admin Password]]
+--a_s_p_ipkg = [[<abbr title="Itsy Package Management System">IPKG</abbr>-Configuration]]
+a_s_p_ipkg = [[IPKG-Configuration]]
+a_s_sshkeys = [[<abbr title="Secure Shell">SSH</abbr>-Keys]]
+a_s_fstab = [[Mount Points]]
+a_s_flash = [[Flash Firmware]]
+a_s_i_system1 = [[Change settings related to the system itself, its identification, installed hard- and software, authentication or mount points.]]
a_s_i_system2 = [[These settings define the base of your system.]]
-a_s_i_system3 = [[Pay attention as any misconfiguration here may prevent your device from booting
-or may lock yourself out of it.]]
-
-a_s_packages_do = "Perform Actions"
-a_s_packages_install = "Install"
-a_s_packages_installurl = "Download and install package"
-a_s_packages_ipkg = "Edit package lists and installation targets"
-a_s_packages_name = "Paketname"
-a_s_packages_remove = "Remove"
-a_s_packages_search = "Find package"
-a_s_packages_update = "Package lists updated"
-a_s_packages_updatelist = "Update package lists"
-a_s_packages_upgrade = "Upgrade installed packages"
-
-a_s_p_ipkg_pkglists = "Package lists"
-a_s_p_ipkg_targets = "Installation targets"
-
-a_s_changepw1 = "Change the password of the system administrator (User \"root\")"
-a_s_changepw_changed = "Password successfully changed"
-a_s_changepw_nomatch = "Error: Passwords do not match"
-
-a_s_sshkeys1 = "Here you can paste public SSH-Keys (one per line) for SSH public-key authentication."
-
-a_s_fstab_mountpoints = "Mount Points"
-a_s_fstab_mountpoints1 = "Mount Points define at which point a memory device will be attached to the filesystem"
-
-a_s_fstab_mountpoint = "Mount Point"
-a_s_fstab_device1 = "The device file of the memory or partition (e.g. /dev/sda1)"
-a_s_fstab_fs1 = "The filesystem that was used to format the memory (e.g. ext3)"
-a_s_fstab_swap1 = [[If your physical memory is insufficient unused data can be temporarily swapped
-to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very slow process
-as the swap-device cannot be accessed with the high datarates of the RAM.]]
-
-a_s_flash_flashed = "Firmware successfully flashed. Rebooting device..."
-a_s_flash_flasherr = "Failed to flash"
-a_s_flash_fwimage = "Firmwareimage"
-a_s_flash_fwupgrade = "Flash Firmware"
-a_s_flash_keepcfg = "Keep configuration files"
-a_s_flash_notimplemented = "Sorry, this function is not (yet) available for your platform."
-a_s_flash_upgrade1 = "Replaces the installed firmware with a new one. The firmware format is platform-dependent."
-
-a_s_reboot1 = "Reboots the operating system of your device"
-a_s_reboot_do = "Perform reboot"
-a_s_reboot_running = "Please wait: Device rebooting..."
-a_s_reboot_u = "Warning: There are unsaved changes that will be lost while rebooting!"
-
-a_s_applyreboot1 = "Changes applied."
-
-a_s_backup = "Backup / Restore"
-a_s_backup_backup = "Create backup"
-a_s_backup_archive = "Backup Archive"
-a_s_backup_reset = "Reset router to defaults"
-a_s_backup_reset1 = "Proceed reverting all settings and resetting to firmware defaults?"
-a_s_backup_restore = "Restore backup"
-a_s_backup1 = [[Here you can backup and restore your router configuration
-and - if possible - reset the router to the default settings.]]
-
-
-a_srv_http = "HTTP-Server"
-a_srv_ssh = "SSH-Server"
-
-a_srv_services1 = "Services and daemons perform certain tasks on your device."
-a_srv_services2 = [[Most of them are network servers, that offer a certain service for your device or network like
-shell access, serving webpages like LuCI, doing mesh routing, sending e-mails, ...]]
-
-a_srv_http1 = "A small webserver which can be used to serve LuCI."
-a_srv_http_authrealm = "Authentication Realm"
-a_srv_http_authrealm1 = "The realm which will be displayed at the authentication prompt for protected pages."
-a_srv_http_config1 = "defaults to /etc/httpd.conf"
-a_srv_http_root = "Document root"
-
-a_srv_dropbear1 = "Dropbear offers SSH network shell access and an integrated SCP server"
-a_srv_d_pwauth = "Password authentication"
-a_srv_d_pwauth1 = "Allow SSH password authentication"
-
-a_w_wifi1 = [[On this pages you find confiugration options for WLAN based wireless networks.]]
-a_w_wifi2 = [[You can easily integrate your 802.11a/b/g/n-devices into your physical network and use
-the virtual adapter support to build wireless repeaters or offer several networks with one device.]]
-a_w_wifi3 = [[There is support for Managed, Client, Ad-Hoc and WDS operating modes as well as
-WPA and WPA2 encryption for secure communnication.]]
-
-a_w_devices1 = "Here you can configure installed wifi devices."
+a_s_i_system3 = [[Pay attention as any misconfiguration here may prevent your device from booting or may lock yourself out of it.]]
+a_s_packages_do = [[Perform Actions]]
+a_s_packages_install = [[Install]]
+a_s_packages_installurl = [[Download and install package]]
+a_s_packages_ipkg = [[Edit package lists and installation targets]]
+a_s_packages_name = [[Paketname]]
+a_s_packages_remove = [[Remove]]
+a_s_packages_search = [[Find package]]
+a_s_packages_update = [[Package lists updated]]
+a_s_packages_updatelist = [[Update package lists]]
+a_s_packages_upgrade = [[Upgrade installed packages]]
+a_s_p_ipkg_pkglists = [[Package lists]]
+a_s_p_ipkg_targets = [[Installation targets]]
+a_s_changepw1 = [[Change the password of the system administrator (User <code>root</code>)]]
+a_s_changepw_changed = [[Password successfully changed]]
+a_s_changepw_nomatch = [[Error: Passwords do not match]]
+a_s_sshkeys1 = [[Here you can paste public <abbr title="Secure Shell">SSH</abbr>-Keys (one per line) for <abbr title="Secure Shell">SSH</abbr> public-key authentication.]]
+a_s_fstab_mountpoints = [[Mount Points]]
+a_s_fstab_mountpoints1 = [[Mount Points define at which point a memory device will be attached to the filesystem]]
+a_s_fstab_active = [[Mounted file systems"]]
+a_s_fstab_used = [[Used"]]
+a_s_fstab_avail = [[Available"]]
+a_s_fstab_mountpoint = [[Mount Point]]
+a_s_fstab_device1 = [[The device file of the memory or partition (<abbr title="for example">e.g.</abbr> <code>/dev/sda1</code>)]]
+a_s_fstab_fs1 = [[The filesystem that was used to format the memory (<abbr title="for example">e.g.</abbr> <samp><abbr title="Third Extended Filesystem">ext3</abbr></samp>)]]
+a_s_fstab_swap1 = [[If your physical memory is insufficient unused data can be temporarily swapped to a swap-device resulting in a higher amount of usable <abbr title="Random Access Memory">RAM</abbr>. Be aware that swapping data is a very slow process as the swap-device cannot be accessed with the high datarates of the <abbr title="Random Access Memory">RAM</abbr>.]]
+a_s_flash_flashed = [[Firmware successfully flashed. Rebooting device...]]
+a_s_flash_flasherr = [[Failed to flash]]
+a_s_flash_fwimage = [[Firmwareimage]]
+a_s_flash_fwupgrade = [[Flash Firmware]]
+a_s_flash_keepcfg = [[Keep configuration files]]
+a_s_flash_notimplemented = [[Sorry, this function is not (yet) available for your platform.]]
+a_s_flash_upgrade1 = [[Replaces the installed firmware with a new one. The firmware format is platform-dependent.]]
+a_s_reboot1 = [[Reboots the operating system of your device]]
+a_s_reboot_do = [[Perform reboot]]
+a_s_reboot_running = [[Please wait: Device rebooting...]]
+a_s_reboot_u = [[Warning: There are unsaved changes that will be lost while rebooting!]]
+a_s_applyreboot1 = [[Changes applied.]]
+a_s_backup = [[Backup / Restore]]
+a_s_backup_backup = [[Create backup]]
+a_s_backup_archive = [[Backup Archive]]
+a_s_backup_reset = [[Reset router to defaults]]
+a_s_backup_reset1 = [[Proceed reverting all settings and resetting to firmware defaults?]]
+a_s_backup_restore = [[Restore backup]]
+a_s_backup1 = [[Here you can backup and restore your router configuration and - if possible - reset the router to the default settings.]]
+a_srv_http = [[<abbr title="Hypertext Transfer Protocol">HTTP</abbr>-Server]]
+a_srv_ssh = [[<abbr title="Secure Shell">SSH</abbr>-Server]]
+a_srv_services1 = [[Services and daemons perform certain tasks on your device.]]
+a_srv_services2 = [[Most of them are network servers, that offer a certain service for your device or network like shell access, serving webpages like <abbr title="Lua Configuration Interface">LuCI</abbr>, doing mesh routing, sending e-mails, ...]]
+a_srv_http1 = [[A small webserver which can be used to serve <abbr title="Lua Configuration Interface">LuCI</abbr>.]]
+a_srv_http_authrealm = [[Authentication Realm]]
+a_srv_http_authrealm1 = [[The realm which will be displayed at the authentication prompt for protected pages.]]
+a_srv_http_config1 = [[defaults to <code>/etc/httpd.conf</code>]]
+a_srv_http_root = [[Document root]]
+a_srv_dropbear1 = [[Dropbear offers <abbr title="Secure Shell">SSH</abbr> network shell access and an integrated <abbr title="Secure Copy">SCP</abbr> server]]
+a_srv_d_pwauth = [[Password authentication]]
+a_srv_d_pwauth1 = [[Allow <abbr title="Secure Shell">SSH</abbr> password authentication]]
a_w_channel = "Channel"
-a_w_txantenna = "Transmit Antenna"
-a_w_rxantenna = "Receive Antenna"
-a_w_distance1 = "Distance to furthest station (m)"
-a_w_diversity = "Diversity"
-a_w_countrycode = "Country Code"
-a_w_connlimit = "Connection Limit"
-
-a_w_networks1 = [[You can run several wifi networks with one device. Be aware that there are certain
-hardware and driverspecific restrictions. Normally you can operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode
-network simultaneously.]]
-a_w_netid = "Network Name (ESSID)"
-a_w_network1 = "Add the Wifi network to physical network"
-a_w_txpwr = "Transmit Power"
-a_w_brcmburst = "Broadcom Frameburst"
-a_w_athburst = "Atheros Frameburst"
-a_w_radiussrv = "Radius-Server"
-a_w_radiusport = "Radius-Port"
-a_w_apisolation = "AP-Isolation"
-a_w_apisolation1 = "Prevents Client to Client communication"
-a_w_hideessid = "Hide ESSID"
-a_w_ap = "Access Point"
-a_w_adhoc = "Ad-Hoc"
-a_w_ahdemo = "Pseudo Ad-Hoc (ahdemo)"
-a_w_client = "Client"
-a_w_wds = "WDS"
-a_w_monitor = "Monitor"
-
-dhcp_desc = "Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls"
-dhcp_dnsmasq_domainneeded = "Domain required"
-dhcp_dnsmasq_domainneeded_desc = "Don't forward DNS-Requests without DNS-Name"
-dhcp_dnsmasq_authoritative = "Authoritative"
-dhcp_dnsmasq_authoritative_desc = "This is the only DHCP in the local network"
-dhcp_dnsmasq_boguspriv = "Filter private"
-dhcp_dnsmasq_boguspriv_desc = "Don't forward reverse lookups for local networks"
-dhcp_dnsmasq_filterwin2k = "Filter useless"
-dhcp_dnsmasq_filterwin2k_desc = "filter useless DNS-queries of Windows-systems"
-dhcp_dnsmasq_localisequeries = "Localise queries"
-dhcp_dnsmasq_localisequeries_desc = "localises the hostname depending on its subnet"
-dhcp_dnsmasq_local = "Local Server"
-dhcp_dnsmasq_domain = "Local Domain"
-dhcp_dnsmasq_expandhosts = "Expand Hosts"
-dhcp_dnsmasq_expandhosts_desc = "adds domain names to hostentries in the resolv file"
-dhcp_dnsmasq_nonegcache = "don't cache unknown"
-dhcp_dnsmasq_nonegcache_desc = "prevents caching of negative DNS-replies"
-dhcp_dnsmasq_readethers = "Use /etc/ethers"
-dhcp_dnsmasq_readethers_desc = "Read /etc/ethers to configure the DHCP-Server"
-dhcp_dnsmasq_leasefile = "Leasefile"
-dhcp_dnsmasq_leasefile_desc = "file where given DHCP-leases will be stored"
-dhcp_dnsmasq_resolvfile = "Resolvfile"
-dhcp_dnsmasq_resolvfile_desc = "local DNS file"
-dhcp_dnsmasq_nohosts = "Ignore /etc/hosts"
-dhcp_dnsmasq_strictorder = "Strict order"
-dhcp_dnsmasq_strictorder_desc = "DNS-Server will be queried in the order of the resolvfile"
-dhcp_dnsmasq_logqueries = "Log queries"
-dhcp_dnsmasq_noresolv = "Ignore resolve file"
-dhcp_dnsmasq_dnsforwardmax = "concurrent queries"
-dhcp_dnsmasq_port = "DNS-Port"
-dhcp_dnsmasq_ednspacket_max = "max. EDNS.0 paket size"
-dhcp_dnsmasq_dhcpleasemax = "max. DHCP-Leases"
-dhcp_dnsmasq_addnhosts = "additional hostfile"
-dhcp_dnsmasq_queryport = "query port"
-
-a_n_switch = "Switch"
-a_n_routes = "Routes"
-
-a_network1 = "In this area you find all network-related settings."
-a_network2 = "On most routers the network switch can be freely configured and splitted up into several VLANs."
-a_network3 = "Interfaces and PPPoE / PPTP-Settings allow a custom organisation of the network and connections to other networks like the internet."
-a_network4 = "With DHCP devices in your local network can be automatically configured for network communication."
-a_network5 = "Firewall and portforwarding can be used to secure your network while providing services to external networks."
-
-a_n_switch1 = [[The network ports on your router can be combined to several VLANs
-in which computers can communicate directly with each other.
-VLANs are often used to separate different network segments.
-Often there is by default one Uplink port for a connection to the next greater network like the internet
-and other ports for a local network.]]
-network_switch_desc = [[Ports belonging to a VLAN are separated with spaces.
-The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router.
-On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
-
-a_n_ifaces1 = [[On this page you can configure the network interfaces.
-You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names
-of several network interfaces separated by spaces.
-You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).]]
-a_n_i_bridge = "Bridge interfaces"
-a_n_i_bridge1 = "creates a bridge over specified interface(s)"
-
-dhcp_desc = [[With DHCP network members can automatically receive
-their network settings (IP-address, netmaske, DNS-server, ...).]]
-dhcp_dhcp_leasetime = "Leasetime"
-dhcp_dhcp_dynamicdhcp = "Dynamic DHCP"
-dhcp_dhcp_ignore = "Ignore interface"
-dhcp_dhcp_ignore_desc = "disable DHCP for this interface"
-dhcp_dhcp_force = "Force"
-dhcp_dhcp_start_desc = "first address (last octet)"
-dhcp_dhcp_limit_desc = "number of leased addresses -1"
-
-luci_ethers = "Static Leases"
-
-a_n_ptp = "Point-to-Point Connections"
-a_n_ptp1 = [[Point-to-Point connections with PPPoE or PPTP are often used to connect a device
-over DSL or similar technologies to an internet access point.]]
-network_interface_server = "PPTP-Server"
-network_interface_demand = "Automatic Disconnect"
-network_interface_demand_desc = "Time (in s) after which an unused connection will be closed"
-network_interface_keepalive = "Keep-Alive"
-network_interface_keepalive_desc = "Number of failed connection tests to initiate automatic reconnect"
-
-a_n_routes = "Static Routes"
-a_n_routes1 = [[With Static Routes you can specify through which
+a_w_wifi1 = [[On this pages you find confiugration options for <abbr title="Wireless Local Area Network">WLAN</abbr> based wireless networks.]]
+a_w_wifi2 = [[You can easily integrate your 802.11a/b/g/n-devices into your physical network and use the virtual adapter support to build wireless repeaters or offer several networks with one device.]]
+a_w_wifi3 = [[There is support for Managed, Client, Ad-Hoc and <abbr title="Wireless Distribution System">WDS</abbr> operating modes as well as <abbr title="Wi-Fi Protected Access">WPA</abbr> and <abbr title="Wi-Fi Protected Access 2">WPA2</abbr> encryption for secure communnication.]]
+a_w_devices1 = [[Here you can configure installed wifi devices.]]
+a_w_txantenna = [[Transmit Antenna]]
+a_w_rxantenna = [[Receive Antenna]]
+a_w_distance1 = [[Distance to furthest station (in meter)]]
+a_w_diversity = [[Diversity]]
+a_w_countrycode = [[Country Code]]
+a_w_connlimit = [[Connection Limit]]
+a_w_networks1 = [[You can run several wifi networks with one device. Be aware that there are certain hardware and driverspecific restrictions. Normally you can operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network simultaneously.]]
+a_w_netid = [[Network Name (<abbr title="Extended Service Set Identifier">ESSID</abbr>)]]
+a_w_network1 = [[Add the Wifi network to physical network]]
+a_w_txpwr = [[Transmit Power]]
+a_w_brcmburst = [[Broadcom Frameburst]]
+a_w_athburst = [[Atheros Frameburst]]
+a_w_radiussrv = [[RadiusServer]]
+a_w_radiusport = [[Radius-Port]]
+a_w_apisolation = [[AP-Isolation]]
+a_w_apisolation1 = [[Prevents Client to Client communication]]
+a_w_hideessid = [[Hide <abbr title="Extended Service Set Identifier">ESSID</abbr>]]
+a_w_ap = [[Access Point]]
+a_w_adhoc = [[Ad-Hoc]]
+a_w_ahdemo = [[Pseudo Ad-Hoc (ahdemo)]]
+a_w_client = [[Client]]
+a_w_wds = [[<abbr title="Wireless Distribution System">WDS</abbr>]]
+a_w_monitor = [[Monitor]]
+dhcp_dnsmasq_desc = [[Dnsmasq is a combined <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr>-Server and <abbr title="Domain Name System">DNS</abbr>-Forwarder for <abbr title="Network Address Translation">NAT</abbr> firewalls]]
+dhcp_dnsmasq_domainneeded = [[Domain required]]
+dhcp_dnsmasq_domainneeded_desc = [[Don't forward <abbr title="Domain Name System">DNS</abbr>-Requests without <abbr title="Domain Name System">DNS</abbr>-Name]]
+dhcp_dnsmasq_authoritative = [[Authoritative]]
+dhcp_dnsmasq_authoritative_desc = [[This is the only <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr> in the local network]]
+dhcp_dnsmasq_boguspriv = [[Filter private]]
+dhcp_dnsmasq_boguspriv_desc = [[Don't forward reverse lookups for local networks]]
+dhcp_dnsmasq_filterwin2k = [[Filter useless]]
+dhcp_dnsmasq_filterwin2k_desc = [[filter useless <abbr title="Domain Name System">DNS</abbr>-queries of Windows-systems]]
+dhcp_dnsmasq_localisequeries = [[Localise queries]]
+dhcp_dnsmasq_localisequeries_desc = [[localises the hostname depending on its subnet]]
+dhcp_dnsmasq_local = [[Local Server]]
+dhcp_dnsmasq_domain = [[Local Domain]]
+dhcp_dnsmasq_expandhosts = [[Expand Hosts]]
+dhcp_dnsmasq_expandhosts_desc = [[adds domain names to hostentries in the resolv file]]
+dhcp_dnsmasq_nonegcache = [[don't cache unknown]]
+dhcp_dnsmasq_nonegcache_desc = [[prevents caching of negative <abbr title="Domain Name System">DNS</abbr>-replies]]
+dhcp_dnsmasq_readethers = [[Use <code>/etc/ethers</code>]]
+dhcp_dnsmasq_readethers_desc = [[Read <code>/etc/ethers</code> to configure the <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr>-Server]]
+dhcp_dnsmasq_leasefile = [[Leasefile]]
+dhcp_dnsmasq_leasefile_desc = [[file where given <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr>-leases will be stored]]
+dhcp_dnsmasq_resolvfile = [[Resolvfile]]
+dhcp_dnsmasq_resolvfile_desc = [[local <abbr title="Domain Name System">DNS</abbr> file]]
+dhcp_dnsmasq_nohosts = [[Ignore <code>/etc/hosts</code>]]
+dhcp_dnsmasq_strictorder = [[Strict order]]
+dhcp_dnsmasq_strictorder_desc = [[<abbr title="Domain Name System">DNS</abbr>-Server will be queried in the order of the resolvfile]]
+dhcp_dnsmasq_logqueries = [[Log queries]]
+dhcp_dnsmasq_noresolv = [[Ignore resolve file]]
+dhcp_dnsmasq_dnsforwardmax = [[concurrent queries]]
+dhcp_dnsmasq_port = [[<abbr title="Domain Name System">DNS</abbr>-Port]]
+dhcp_dnsmasq_ednspacket_max = [[<abbr title="maximal">max.</abbr> <abbr title="Extension Mechanisms for Domain Name System">EDNS0</abbr> paket size]]
+dhcp_dnsmasq_dhcpleasemax = [[<abbr title="maximal">max.</abbr> <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr>-Leases]]
+dhcp_dnsmasq_addnhosts = [[additional hostfile]]
+dhcp_dnsmasq_queryport = [[query port]]
+a_n_switch = [[Switch]]
+a_n_routes = [[Routes]]
+a_n_routes1 = [[Routes specify over which
interface and gateway a certain host or network can be reached.]]
-a_n_r_target1 = "host-IP or network"
-a_n_r_netmask1 = "if target is a network"
-m_n_local = "Local Network"
+a_network1 = [[In this area you find all network-related settings.]]
+a_network2 = [[On most routers the network switch can be freely configured and splitted up into several <abbr title="Virtual Local Area Network">VLAN</abbr>s.]]
+a_network3 = [[Interfaces and <abbr title="Point-to-Point Protocol over Ethernet">PPPoE</abbr> / <abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Settings allow a custom organisation of the network and connections to other networks like the internet.]]
+a_network4 = [[With <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr> devices in your local network can be automatically configured for network communication.]]
+a_network5 = [[Firewall and portforwarding can be used to secure your network while providing services to external networks.]]
+a_n_switch1 = [[The network ports on your router can be combined to several <abbr title="Virtual Local Area Network">VLAN</abbr>s in which computers can communicate directly with each other. <abbr title="Virtual Local Area Network">VLAN</abbr>s are often used to separate different network segments. Often there is by default one Uplink port for a connection to the next greater network like the internet and other ports for a local network.]]
+network_switch_desc = [[Ports belonging to a <abbr title="Virtual Local Area Network">VLAN</abbr> are separated with spaces. The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router. On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
+a_n_ifaces1 = [[On this page you can configure the network interfaces. You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names of several network interfaces separated by spaces. You can also use <abbr title="Virtual Local Area Network">VLAN</abbr> notation <samp>INTERFACE.VLANNR</samp> (<abbr title="for example">e.g.</abbr>: <samp>eth0.1</samp>).]]
+a_n_i_bridge = [[Bridge interfaces]]
+a_n_i_bridge1 = [[creates a bridge over specified interface(s)]]
+dhcp_desc = [[With <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr> network members can automatically receive their network settings (<abbr title="Internet Protocol">IP</abbr>-address, netmask, <abbr title="Domain Name System">DNS</abbr>-server, ...).]]
+dhcp_dhcp_leasetime = [[Leasetime]]
+dhcp_dhcp_dynamicdhcp = [[Dynamic <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr>]]
+dhcp_dhcp_ignore = [[Ignore interface]]
+dhcp_dhcp_ignore_desc = [[disable <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr> for this interface]]
+dhcp_dhcp_force = [[Force]]
+dhcp_dhcp_start_desc = [[first address (last octet)]]
+dhcp_dhcp_limit_desc = [[number of leased addresses -1]]
+dhcp_leases = [[Leases]]
+luci_ethers = [[Static Leases]]
+dhcp_timeremain = [[Leasetime remaining]]
+dhcp_leases_active = [[Active Leases]]
+a_n_ptp = [[Point-to-Point Connections]]
+a_n_ptp1 = [[Point-to-Point connections with <abbr title="Point-to-Point Protocol over Ethernet">PPPoE</abbr> or <abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr> are often used to connect a device over <abbr title="Digital Subscriber Line">DSL</abbr> or similar technologies to an internet access point.]]
+network_interface_server = [[<abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Server]]
+network_interface_demand = [[Automatic Disconnect]]
+network_interface_demand_desc = [[Time (in seconds) after which an unused connection will be closed]]
+network_interface_keepalive = [[Keep-Alive]]
+network_interface_keepalive_desc = [[Number of failed connection tests to initiate automatic reconnect]]
+a_n_r_routes1 = [[Routes specify over which interface and gateway a certain host or network can be reached.]]
+a_n_routes_static = [[Static Routes]]
+a_n_routes_kernel4 = [[Active <abbr title="Internet Protocol Version 4">IPv4</abbr>-Routes]]
+a_n_r_target1 = [[host-<abbr title="Internet Protocol Address">IP</abbr> or network]]
+a_n_r_netmask1 = [[if target is a network]]
m_n_inet = "Internet Connection"
-m_n_route = "Route"
-m_n_brdige = "Bridge"
-
-m_w_ap = "Provide (Access Point)"
-m_w_adhoc = "Independent (Ad-Hoc)"
-m_w_client = "Join (Client)"
-m_w_wds = "Distributed (WDS)"
-m_w_clientmode = "Clientmode"
-
-system_system_logsize = "System log buffer size"
-system_system_logip = "External system log server"
-system_system_conloglevel = "Log output level"
-system_system_conloglevel_desc = "Level of log messages on the console"
-
-m_i_processor = "Processor"
-m_i_memory = "Memory"
-m_i_systemtime = "Local Time"
-m_i_uptime = "Uptime"
-
-m_n_d_firstaddress = "First leased address"
-m_n_d_numleases = "Number of leased addresses"
-
-routingtable = "Routing table"
-wlanscan = "Wifi scan"
-
-frequency = "Frequency"
-power = "Power"
-noise = "Noise"
-signal = "Signal"
-link = "Link"
-frag = "Frag."
-rts = "RTS"
-bitrate = "Bitrate"
-
-m_n_keepalive = "automatically reconnect"
-m_n_dialondemand = "disconnect when idle for"
-m_n_pptp_server = "PPTP-Server"
-
-leds = "LED Configuration"
-leds_desc = "Customizes the behaviour of the device LEDs if possible."
-system_led_name = "LED Name"
-system_led_sysfs = "LED Device"
-system_led_default = "Default state"
-system_led_default_desc = "ticked = on"
-system_led_trigger = "Trigger"
-system_led_trigger_none = "None"
-system_led_trigger_defaulton = "Default On"
-system_led_trigger_timer = "Timer"
-system_led_trigger_heartbeat = "Heartbeat (Load Average)"
-system_led_trigger_netdev = "Network Device"
-system_led_delayoff = "Off-State Delay"
-system_led_delayoff_desc = "Time (in ms) the LED is off"
-system_led_delayon = "On-State Delay"
-system_led_delayon_desc = "Time (in ms) the LED is on"
-system_led_dev = "Device"
-system_led_mode = "Trigger Mode"
-system_led_mode_link = "Link On"
-system_led_mode_tx = "Transmit"
-system_led_mode_rx = "Receive"
-
-network_interface_up = "Active"
-network_interface_hwaddr = "MAC-Address"
-network_interface_hwaddr_desc = "Hardware Address"
-network_interface_txrx = "Traffic"
-network_interface_txrx_desc = "transmitted / received"
-network_interface_err = "Errors"
-network_interface_err_desc = "TX / RX"
-
-network_interface_fwzone = "Create / Assign firewall-zone"
-network_interface_fwzone_desc = "This interface does not belong to any firewall zone yet."
\ No newline at end of file
+m_n_local = [[Local Network]]
+m_n_route = [[Route]]
+m_n_brdige = [[Bridge]]
+m_w_ap = [[Provide (Access Point)]]
+m_w_adhoc = [[Independent (Ad-Hoc)]]
+m_w_client = [[Join (Client)]]
+m_w_wds = [[Distributed (<abbr title="Wireless Distribution System">WDS</abbr>)]]
+m_w_clientmode = [[Clientmode]]
+system_system_logsize = [[System log buffer size]]
+system_system_logip = [[External system log server]]
+system_system_conloglevel = [[Log output level]]
+system_system_conloglevel_desc = [[Level of log messages on the console]]
+m_i_processor = [[Processor]]
+m_i_memory = [[Memory]]
+m_i_systemtime = [[Local Time]]
+m_i_uptime = [[Uptime]]
+m_n_d_firstaddress = [[First leased address]]
+m_n_d_numleases = [[Number of leased addresses]]
+routingtable = [[Routing table]]
+wlanscan = [[Wifi scan]]
+frequency = [[Frequency]]
+power = [[Power]]
+noise = [[Noise]]
+signal = [[Signal]]
+link = [[Link]]
+frag = [[<abbr title="Fragmentation">Frag.</abbr>]]
+rts = [[<abbr title="Request To Send">RTS</abbr>]]
+bitrate = [[Bitrate]]
+m_n_keepalive = [[automatically reconnect]]
+m_n_dialondemand = [[disconnect when idle for]]
+m_n_pptp_server = [[<abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Server]]
+leds = [[<abbr title="Light Emitting Diode">LED</abbr> Configuration]]
+leds_desc = [[Customizes the behaviour of the device <abbr title="Light Emitting Diode">LED</abbr>s if possible.]]
+system_led_name = [[<abbr title="Light Emitting Diode">LED</abbr> Name]]
+system_led_sysfs = [[<abbr title="Light Emitting Diode">LED</abbr> Device]]
+system_led_default = [[Default state]]
+system_led_default_desc = [[ticked = on]]
+system_led_trigger = [[Trigger]]
+system_led_trigger_none = [[None]]
+system_led_trigger_defaulton = [[Default On]]
+system_led_trigger_timer = [[Timer]]
+system_led_trigger_heartbeat = [[Heartbeat (Load Average)]]
+system_led_trigger_netdev = [[Network Device]]
+system_led_delayoff = [[Off-State Delay]]
+system_led_delayoff_desc = [[Time (in ms) the <abbr title="Light Emitting Diode">LED</abbr> is off]]
+system_led_delayon = [[On-State Delay]]
+system_led_delayon_desc = [[Time (in ms) the <abbr title="Light Emitting Diode">LED</abbr> is on]]
+system_led_dev = [[Device]]
+system_led_mode = [[Trigger Mode]]
+system_led_mode_link = [[Link On]]
+system_led_mode_tx = [[Transmit]]
+system_led_mode_rx = [[Receive]]
+network_interface_up = [[Active]]
+network_interface_hwaddr = [[<abbr title="Media Access Control">MAC</abbr>-Address]]
+network_interface_hwaddr_desc = [[Hardware Address]]
+network_interface_txrx = [[Traffic]]
+network_interface_txrx_desc = [[transmitted / received]]
+network_interface_err = [[Errors]]
+network_interface_err_desc = [[TX / RX]]
+network_interface_fwzone = [[Create / Assign firewall-zone]]
+network_interface_fwzone_desc = [[This interface does not belong to any firewall zone yet.]]
+
+process_head = "Processes"
+process_descr = "This list gives an overview over currently running system processes and their status."
+process_pid = "PID"
+process_owner = "Owner"
+process_command = "Command"
+process_cpu = "CPU usage (%)"
+process_mem = "Memory usage (%)"
+process_hup = "Hang Up"
+process_term = "Terminate"
+process_kill = "Kill"
+
+mem_cached = "cached"
+mem_buffered = "buffered"
+mem_free = "free"
+
+a_s_crontab = "Scheduled Tasks"
+a_s_crontab1 = "This is the system crontab in which scheduled tasks can be defined."
\ No newline at end of file
projects / project / luci.git / blobdiff