+
+a_network1 = [[In this area you find all network-related settings.]]
+a_network2 = [[On most routers the network switch can be freely configured and splitted up into several <abbr title="Virtual Local Area Network">VLAN</abbr>s.]]
+a_network3 = [[Interfaces and <abbr title="Point-to-Point Protocol over Ethernet">PPPoE</abbr> / <abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Settings allow a custom organisation of the network and connections to other networks like the internet.]]
+a_network4 = [[With <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr> devices in your local network can be automatically configured for network communication.]]
+a_network5 = [[Firewall and portforwarding can be used to secure your network while providing services to external networks.]]
+a_n_switch1 = [[The network ports on your router can be combined to several <abbr title="Virtual Local Area Network">VLAN</abbr>s in which computers can communicate directly with each other. <abbr title="Virtual Local Area Network">VLAN</abbr>s are often used to separate different network segments. Often there is by default one Uplink port for a connection to the next greater network like the internet and other ports for a local network.]]
+network_switch_desc = [[Ports belonging to a <abbr title="Virtual Local Area Network">VLAN</abbr> are separated with spaces. The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router. On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
+a_n_ifaces1 = [[On this page you can configure the network interfaces. You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names of several network interfaces separated by spaces. You can also use <abbr title="Virtual Local Area Network">VLAN</abbr> notation <samp>INTERFACE.VLANNR</samp> (<abbr title="for example">e.g.</abbr>: <samp>eth0.1</samp>).]]
+a_n_i_bridge = [[Bridge interfaces]]
+a_n_i_bridge1 = [[creates a bridge over specified interface(s)]]
+dhcp_desc = [[With <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr> network members can automatically receive their network settings (<abbr title="Internet Protocol">IP</abbr>-address, netmask, <abbr title="Domain Name System">DNS</abbr>-server, ...).]]
+dhcp_dhcp_leasetime = [[Leasetime]]
+dhcp_dhcp_dynamicdhcp = [[Dynamic <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr>]]
+dhcp_dhcp_ignore = [[Ignore interface]]
+dhcp_dhcp_ignore_desc = [[disable <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr> for this interface]]
+dhcp_dhcp_force = [[Force]]
+dhcp_dhcp_start_desc = [[first address (last octet)]]
+dhcp_dhcp_limit_desc = [[number of leased addresses -1]]
+dhcp_leases = [[Leases]]
+luci_ethers = [[Static Leases]]
+dhcp_timeremain = [[Leasetime remaining]]
+dhcp_leases_active = [[Active Leases]]
+a_n_ptp = [[Point-to-Point Connections]]
+a_n_ptp1 = [[Point-to-Point connections with <abbr title="Point-to-Point Protocol over Ethernet">PPPoE</abbr> or <abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr> are often used to connect a device over <abbr title="Digital Subscriber Line">DSL</abbr> or similar technologies to an internet access point.]]
+network_interface_server = [[<abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Server]]
+network_interface_demand = [[Automatic Disconnect]]
+network_interface_demand_desc = [[Time (in seconds) after which an unused connection will be closed]]
+network_interface_keepalive = [[Keep-Alive]]
+network_interface_keepalive_desc = [[Number of failed connection tests to initiate automatic reconnect]]
+a_n_r_routes1 = [[Routes specify over which interface and gateway a certain host or network can be reached.]]
+a_n_routes_static = [[Static Routes]]
+a_n_routes_kernel4 = [[Active <abbr title="Internet Protocol Version 4">IPv4</abbr>-Routes]]
+a_n_r_target1 = [[host-<abbr title="Internet Protocol Address">IP</abbr> or network]]
+a_n_r_netmask1 = [[if target is a network]]
+m_n_inet = "Internet Connection"
+m_n_local = [[Local Network]]
+m_n_route = [[Route]]
+m_n_brdige = [[Bridge]]
+m_w_ap = [[Provide (Access Point)]]
+m_w_adhoc = [[Independent (Ad-Hoc)]]
+m_w_client = [[Join (Client)]]
+m_w_wds = [[Distributed (<abbr title="Wireless Distribution System">WDS</abbr>)]]
+m_w_clientmode = [[Clientmode]]
+system_system_logsize = [[System log buffer size]]
+system_system_logip = [[External system log server]]
+system_system_conloglevel = [[Log output level]]
+system_system_conloglevel_desc = [[Level of log messages on the console]]
+m_i_processor = [[Processor]]
+m_i_memory = [[Memory]]
+m_i_systemtime = [[Local Time]]
+m_i_uptime = [[Uptime]]
+m_n_d_firstaddress = [[First leased address]]
+m_n_d_numleases = [[Number of leased addresses]]
+routingtable = [[Routing table]]
+wlanscan = [[Wifi scan]]
+frequency = [[Frequency]]
+power = [[Power]]
+noise = [[Noise]]
+signal = [[Signal]]
+link = [[Link]]
+frag = [[<abbr title="Fragmentation">Frag.</abbr>]]
+rts = [[<abbr title="Request To Send">RTS</abbr>]]
+bitrate = [[Bitrate]]
+m_n_keepalive = [[automatically reconnect]]
+m_n_dialondemand = [[disconnect when idle for]]
+m_n_pptp_server = [[<abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Server]]
+leds = [[<abbr title="Light Emitting Diode">LED</abbr> Configuration]]
+leds_desc = [[Customizes the behaviour of the device <abbr title="Light Emitting Diode">LED</abbr>s if possible.]]
+system_led_name = [[<abbr title="Light Emitting Diode">LED</abbr> Name]]
+system_led_sysfs = [[<abbr title="Light Emitting Diode">LED</abbr> Device]]
+system_led_default = [[Default state]]
+system_led_default_desc = [[ticked = on]]
+system_led_trigger = [[Trigger]]
+system_led_trigger_none = [[None]]
+system_led_trigger_defaulton = [[Default On]]
+system_led_trigger_timer = [[Timer]]
+system_led_trigger_heartbeat = [[Heartbeat (Load Average)]]
+system_led_trigger_netdev = [[Network Device]]
+system_led_delayoff = [[Off-State Delay]]
+system_led_delayoff_desc = [[Time (in ms) the <abbr title="Light Emitting Diode">LED</abbr> is off]]
+system_led_delayon = [[On-State Delay]]
+system_led_delayon_desc = [[Time (in ms) the <abbr title="Light Emitting Diode">LED</abbr> is on]]
+system_led_dev = [[Device]]
+system_led_mode = [[Trigger Mode]]
+system_led_mode_link = [[Link On]]
+system_led_mode_tx = [[Transmit]]
+system_led_mode_rx = [[Receive]]
+network_interface_up = [[Active]]
+network_interface_hwaddr = [[<abbr title="Media Access Control">MAC</abbr>-Address]]
+network_interface_hwaddr_desc = [[Hardware Address]]
+network_interface_txrx = [[Traffic]]
+network_interface_txrx_desc = [[transmitted / received]]
+network_interface_err = [[Errors]]
+network_interface_err_desc = [[TX / RX]]
+network_interface_fwzone = [[Create / Assign firewall-zone]]
+network_interface_fwzone_desc = [[This interface does not belong to any firewall zone yet.]]
+
+process_head = "Processes"
+process_descr = "This list gives an overview over currently running system processes and their status."
+process_pid = "PID"
+process_owner = "Owner"
+process_command = "Command"
+process_cpu = "CPU usage (%)"
+process_mem = "Memory usage (%)"
+process_hup = "Hang Up"
+process_term = "Terminate"
+process_kill = "Kill"
+
+mem_cached = "cached"
+mem_buffered = "buffered"
+mem_free = "free"
+
+a_s_crontab = "Scheduled Tasks"
+a_s_crontab1 = "This is the system crontab in which scheduled tasks can be defined."
\ No newline at end of file