local fs = require "nixio.fs"
arg[1] = arg[1] or ""
-arg[2] = arg[2] or ""
m = Map("wireless", "",
translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
local ifsection
function m.on_commit(map)
- local wnet = nw:get_wifinet(arg[2])
+ local wnet = nw:get_wifinet(arg[1])
if ifsection and wnet then
ifsection.section = wnet.sid
- m.title = wnet:get_i18n()
+ m.title = luci.util.pcdata(wnet:get_i18n())
end
end
nw.init(m.uci)
-local wnet = nw:get_wifinet(arg[2])
+local wnet = nw:get_wifinet(arg[1])
+local wdev = wnet and wnet:get_device()
-- redirect to overview page if network does not exist anymore (e.g. after a revert)
-if not wnet then
+if not wnet or not wdev then
luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
return
end
-m.title = wnet:get_i18n()
+-- wireless toggle was requested, commit and reload page
+function m.parse(map)
+ if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
+ if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
+ wnet:set("disabled", nil)
+ else
+ wnet:set("disabled", "1")
+ end
+ wdev:set("disabled", nil)
+
+ nw:commit("wireless")
+ luci.sys.call("(env -i /sbin/wifi down; env -i /sbin/wifi up) >/dev/null 2>/dev/null")
+
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
+ return
+ end
+ Map.parse(map)
+end
+
+m.title = luci.util.pcdata(wnet:get_i18n())
local iw = luci.sys.wifi.getiwinfo(arg[1])
-local tx_powers = iw.txpwrlist or { }
local hw_modes = iw.hwmodelist or { }
+local tx_powers = iw.txpwrlist or { }
+local tx_power = tostring(
+ (iw.txpower and iw.txpower > 0 and iw.txpower) or
+ (#tx_powers > 0 and tx_powers[#tx_powers].dbm)
+)
-
-s = m:section(NamedSection, arg[1], "wifi-device", translate("Device Configuration"))
+s = m:section(NamedSection, wdev:name(), "wifi-device", translate("Device Configuration"))
s.addremove = false
s:tab("general", translate("General Setup"))
st = s:taboption("general", DummyValue, "__status", translate("Status"))
st.template = "admin_network/wifi_status"
-st.ifname = arg[2]
-
-en = s:taboption("general", Flag, "disabled", translate("Enable device"))
-en.enabled = "0"
-en.disabled = "1"
-en.rmempty = false
-
-function en.cfgvalue(self, section)
- return Flag.cfgvalue(self, section) or "0"
+st.ifname = arg[1]
+
+en = s:taboption("general", Button, "__toggle")
+
+if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
+ en.title = translate("Wireless network is disabled")
+ en.inputtitle = translate("Enable")
+ en.inputstyle = "apply"
+else
+ en.title = translate("Wireless network is enabled")
+ en.inputtitle = translate("Disable")
+ en.inputstyle = "reset"
end
-local hwtype = m:get(arg[1], "type")
-local htcaps = m:get(arg[1], "ht_capab") and true or false
+local hwtype = wdev:get("type")
+local htcaps = wdev:get("ht_capab") and true or false
-- NanoFoo
-local nsantenna = m:get(arg[1], "antenna")
+local nsantenna = wdev:get("antenna")
ch = s:taboption("general", Value, "channel", translate("Channel"))
ch:value("auto", translate("auto"))
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- tp.default = tostring(iw and iw.txpower or tx_powers[#tx_powers])
+ tp.default = tx_power
for _, p in ipairs(tx_powers or {}) do
tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
end
s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
translate("Distance to farthest network member in meters."))
+
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
end
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- for _, p in ipairs(iw.txpwrlist) do
+ tp.default = tx_power
+ for _, p in ipairs(tx_powers or {}) do
tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
end
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- for _, p in ipairs(iw.txpwrlist) do
+ tp.default = tx_power
+ for _, p in ipairs(tx_powers or {}) do
tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
end
mode:value("11g", "802.11g")
mode:value("11gst", "802.11g + Turbo")
- mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("allow", translate("Allow listed only"))
- mp:value("deny", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macfilter="allow"})
- ml:depends({macfilter="deny"})
-
ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
ant1.widget = "radio"
ant1:depends("diversity", "")
ifsection = s
s.addremove = false
s.anonymous = true
-s.defaults.device = arg[1]
+s.defaults.device = wdev:name()
s:tab("general", translate("General Setup"))
s:tab("encryption", translate("Wireless Security"))
else
local n = nw:get_network(value)
if n then
- n:type("bridge")
+ n:set("type", "bridge")
n:add_interface(i)
end
end
mode:value("monitor", translate("Monitor"))
bssid:depends({mode="adhoc"})
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
+ mp:depends({mode="ap"})
+ mp:depends({mode="ap-wds"})
+ mp:value("", translate("disable"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
+
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml.datatype = "macaddr"
+ ml:depends({macfilter="allow"})
+ ml:depends({macfilter="deny"})
mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
mp:value("", translate("disable"))
- mp:value("deny", translate("Allow listed only"))
- mp:value("allow", translate("Allow all except listed"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
+
ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml.datatype = "macaddr"
ml:depends({macpolicy="allow"})
ml:depends({macpolicy="deny"})
mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
mp:value("", translate("disable"))
- mp:value("deny", translate("Allow listed only"))
- mp:value("allow", translate("Allow all except listed"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
ml:depends({macpolicy="allow"})
ml:depends({macpolicy="deny"})
encr:depends({mode="sta-wds"})
encr:depends({mode="mesh"})
+function encr.write(self, section, value)
+ if value == "wpa" or value == "wpa2" then
+ self.map.uci:delete("wireless", section, "key")
+ end
+ self.map.uci:set("wireless", section, "encryption", value)
+end
+
+
encr:value("none", "No Encryption")
encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
encr:value("psk2", "WPA2-PSK")
encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
elseif hostapd and not supplicant then
encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
end
-encr:depends("mode", "ap")
-encr:depends("mode", "sta")
-encr:depends("mode", "ap-wds")
-encr:depends("mode", "sta-wds")
-encr:depends("mode", "wds")
-
-server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
-server:depends({mode="ap", encryption="wpa"})
-server:depends({mode="ap", encryption="wpa2"})
-server:depends({mode="ap-wds", encryption="wpa"})
-server:depends({mode="ap-wds", encryption="wpa2"})
-server.rmempty = true
-
-port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
-port:depends({mode="ap", encryption="wpa"})
-port:depends({mode="ap", encryption="wpa2"})
-port:depends({mode="ap-wds", encryption="wpa"})
-port:depends({mode="ap-wds", encryption="wpa2"})
-port.rmempty = true
-
-key = s:taboption("encryption", Value, "key", translate("Key"))
-key:depends("encryption", "wep-open")
-key:depends("encryption", "wep-shared")
-key:depends("encryption", "psk")
-key:depends("encryption", "psk2")
-key:depends("encryption", "psk+psk2")
-key:depends("encryption", "psk-mixed")
-key:depends({mode="ap", encryption="wpa"})
-key:depends({mode="ap", encryption="wpa2"})
-key:depends({mode="ap-wds", encryption="wpa"})
-key:depends({mode="ap-wds", encryption="wpa2"})
-key.rmempty = true
-key.password = true
+auth_server = s:taboption("encryption", Value, "auth_server", translate("Radius-Authentication-Server"))
+auth_server:depends({mode="ap", encryption="wpa"})
+auth_server:depends({mode="ap", encryption="wpa2"})
+auth_server:depends({mode="ap-wds", encryption="wpa"})
+auth_server:depends({mode="ap-wds", encryption="wpa2"})
+auth_server.rmempty = true
+auth_server.datatype = "host"
+
+auth_port = s:taboption("encryption", Value, "auth_port", translate("Radius-Authentication-Port"), translatef("Default %d", 1812))
+auth_port:depends({mode="ap", encryption="wpa"})
+auth_port:depends({mode="ap", encryption="wpa2"})
+auth_port:depends({mode="ap-wds", encryption="wpa"})
+auth_port:depends({mode="ap-wds", encryption="wpa2"})
+auth_port.rmempty = true
+auth_port.datatype = "port"
+
+auth_secret = s:taboption("encryption", Value, "auth_secret", translate("Radius-Authentication-Secret"))
+auth_secret:depends({mode="ap", encryption="wpa"})
+auth_secret:depends({mode="ap", encryption="wpa2"})
+auth_secret:depends({mode="ap-wds", encryption="wpa"})
+auth_secret:depends({mode="ap-wds", encryption="wpa2"})
+auth_secret.rmempty = true
+auth_secret.password = true
+
+acct_server = s:taboption("encryption", Value, "acct_server", translate("Radius-Accounting-Server"))
+acct_server:depends({mode="ap", encryption="wpa"})
+acct_server:depends({mode="ap", encryption="wpa2"})
+acct_server:depends({mode="ap-wds", encryption="wpa"})
+acct_server:depends({mode="ap-wds", encryption="wpa2"})
+acct_server.rmempty = true
+acct_server.datatype = "host"
+
+acct_port = s:taboption("encryption", Value, "acct_port", translate("Radius-Accounting-Port"), translatef("Default %d", 1813))
+acct_port:depends({mode="ap", encryption="wpa"})
+acct_port:depends({mode="ap", encryption="wpa2"})
+acct_port:depends({mode="ap-wds", encryption="wpa"})
+acct_port:depends({mode="ap-wds", encryption="wpa2"})
+acct_port.rmempty = true
+acct_port.datatype = "port"
+
+acct_secret = s:taboption("encryption", Value, "acct_secret", translate("Radius-Accounting-Secret"))
+acct_secret:depends({mode="ap", encryption="wpa"})
+acct_secret:depends({mode="ap", encryption="wpa2"})
+acct_secret:depends({mode="ap-wds", encryption="wpa"})
+acct_secret:depends({mode="ap-wds", encryption="wpa2"})
+acct_secret.rmempty = true
+acct_secret.password = true
+
+wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
+wpakey:depends("encryption", "psk")
+wpakey:depends("encryption", "psk2")
+wpakey:depends("encryption", "psk+psk2")
+wpakey:depends("encryption", "psk-mixed")
+wpakey.datatype = "wpakey"
+wpakey.rmempty = true
+wpakey.password = true
+
+wpakey.cfgvalue = function(self, section, value)
+ local key = m.uci:get("wireless", section, "key")
+ if key == "1" or key == "2" or key == "3" or key == "4" then
+ return nil
+ end
+ return key
+end
+
+wpakey.write = function(self, section, value)
+ self.map.uci:set("wireless", section, "key", value)
+ self.map.uci:delete("wireless", section, "key1")
+end
+
+
+wepslot = s:taboption("encryption", ListValue, "_wep_key", translate("Used Key Slot"))
+wepslot:depends("encryption", "wep-open")
+wepslot:depends("encryption", "wep-shared")
+wepslot:value("1", translatef("Key #%d", 1))
+wepslot:value("2", translatef("Key #%d", 2))
+wepslot:value("3", translatef("Key #%d", 3))
+wepslot:value("4", translatef("Key #%d", 4))
+
+wepslot.cfgvalue = function(self, section)
+ local slot = tonumber(m.uci:get("wireless", section, "key"))
+ if not slot or slot < 1 or slot > 4 then
+ return 1
+ end
+ return slot
+end
+
+wepslot.write = function(self, section, value)
+ self.map.uci:set("wireless", section, "key", value)
+end
+
+local slot
+for slot=1,4 do
+ wepkey = s:taboption("encryption", Value, "key" .. slot, translatef("Key #%d", slot))
+ wepkey:depends("encryption", "wep-open")
+ wepkey:depends("encryption", "wep-shared")
+ wepkey.datatype = "wepkey"
+ wepkey.rmempty = true
+ wepkey.password = true
+
+ function wepkey.write(self, section, value)
+ if value and (#value == 5 or #value == 13) then
+ value = "s:" .. value
+ end
+ return Value.write(self, section, value)
+ end
+end
+
if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
eaptype:value("peap", "PEAP")
eaptype:depends({mode="sta", encryption="wpa"})
eaptype:depends({mode="sta", encryption="wpa2"})
+ eaptype:depends({mode="sta-wds", encryption="wpa"})
+ eaptype:depends({mode="sta-wds", encryption="wpa2"})
cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
cacert:depends({mode="sta", encryption="wpa"})
cacert:depends({mode="sta", encryption="wpa2"})
+ cacert:depends({mode="sta-wds", encryption="wpa"})
+ cacert:depends({mode="sta-wds", encryption="wpa2"})
privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
+ privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
+ privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
identity = s:taboption("encryption", Value, "identity", translate("Identity"))
identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
password = s:taboption("encryption", Value, "password", translate("Password"))
password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
password:depends({mode="sta", eap_type="peap", encryption="wpa"})
password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ password:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ password:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
end
return m
projects / project / luci.git / blobdiff