msgid "AR Support"
msgstr ""
+msgid "ARP ping retries"
+msgstr ""
+
msgid "ATM Bridges"
msgstr ""
msgid "About"
msgstr "A propos"
+msgid "Accept Router Advertisements"
+msgstr ""
+
msgid "Access Point"
msgstr "Point d'accès"
msgid "Active Connections"
msgstr "Connexions Actives"
+msgid "Active IP Connections"
+msgstr ""
+
msgid "Active Leases"
msgstr "Baux actifs"
msgid "Administration"
msgstr "Administration"
-#, fuzzy
msgid "Advanced Settings"
-msgstr "Paramètres de base"
+msgstr ""
msgid "Advertise IPv6 on network"
msgstr ""
msgid "Allow localhost"
msgstr ""
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
+msgid "Allow remote hosts to connect to local SSH forwarded ports"
msgstr ""
-msgid "Allowed range is 1 to FFFF"
+msgid "Allow root logins with password"
+msgstr ""
+
+msgid "Allow the <em>root</em> user to login with password"
msgstr ""
msgid ""
-"Also kernel or service logfiles can be viewed here to get an overview over "
-"their current state."
+"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
+msgstr ""
+
+msgid "Allowed range is 1 to FFFF"
msgstr ""
-"Les journaux des services ou du noyau peuvent être vus ici afin d'obtenir un "
-"aperçu de leur état."
msgid "An additional network will be created if you leave this unchecked."
msgstr ""
msgid "Bridge"
msgstr "Bridge"
-#, fuzzy
msgid "Bridge Port"
-msgstr "Bridger les interfaces"
+msgstr ""
msgid "Bridge interfaces"
msgstr "Bridger les interfaces"
msgid "Bridge unit number"
msgstr ""
+msgid "Buffered"
+msgstr ""
+
msgid "Buttons"
msgstr ""
msgid "CPU usage (%)"
msgstr "Utilisation CPU (%)"
+msgid "Cached"
+msgstr ""
+
msgid "Cancel"
msgstr "Annuler"
msgid "Changes applied."
msgstr "Changements appliqués."
+msgid "Changes the administrator password for accessing the device"
+msgstr ""
+
msgid "Channel"
msgstr "Canal"
msgid "Connect script"
msgstr "Script de Connexion"
+msgid "Connected"
+msgstr ""
+
msgid "Connection Limit"
msgstr "Limite de connexion"
msgid "DHCP Server"
msgstr ""
+msgid "DHCP and DNS"
+msgstr ""
+
msgid "DHCP assigned"
msgstr ""
msgid "DHCP-Options"
msgstr "Options DHCP"
+msgid "DNS"
+msgstr ""
+
msgid "DNS forwardings"
msgstr ""
msgid "Debug"
msgstr ""
+msgid "Default"
+msgstr ""
+
msgid "Default state"
msgstr ""
msgid "Diagnostics"
msgstr ""
+msgid "Directory"
+msgstr ""
+
msgid ""
"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
"this interface."
msgid "Disable HW-Beacon timer"
msgstr ""
+msgid "Disabled"
+msgstr "Désactivé"
+
msgid "Discard upstream RFC1918 responses"
msgstr ""
msgid "Download and install package"
msgstr "Télécharge et installe le paquet"
+msgid "Dropbear Instance"
+msgstr ""
+
msgid ""
"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
msgid "Enable IPv6 on PPP link"
msgstr "Activer l'IPv6 sur le lien PPP"
+msgid "Enable Jumbo Frame passthrough"
+msgstr ""
+
msgid "Enable Keep-Alive"
msgstr ""
msgid "Enable this switch"
msgstr ""
+msgid "Enable/Disable"
+msgstr "Activer/Désactiver"
+
msgid "Enabled"
-msgstr ""
+msgstr "Activé"
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "Ethernet Adapter"
msgstr ""
-#, fuzzy
msgid "Ethernet Bridge"
-msgstr "Bridger les interfaces"
+msgstr ""
msgid "Ethernet Switch"
msgstr ""
msgid "Expand hosts"
msgstr ""
+msgid "Expires"
+msgstr ""
+
msgid ""
"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
msgstr ""
msgid "Fast Frames"
msgstr ""
+msgid "File"
+msgstr ""
+
msgid "Filename of the boot image advertised to clients"
msgstr ""
msgid "Firewall"
msgstr "Pare-Feu"
-#, fuzzy
msgid "Firewall Settings"
msgstr ""
-"Ici, vous trouverez des informations sur l'état actuel du système comme la "
-"fréquence processeur, utilisation mémoire et trafic réseau."
-#, fuzzy
msgid "Firewall Status"
msgstr ""
-"Ici, vous trouverez des informations sur l'état actuel du système comme la "
-"fréquence processeur, utilisation mémoire et trafic réseau."
+
+msgid "Firmware Version"
+msgstr ""
msgid "Firmware image"
msgstr "Firmware image"
msgid "Force DHCP on this network even if another server is detected."
msgstr ""
+msgid "Forward DHCP"
+msgstr ""
+
+msgid "Forward broadcasts"
+msgstr ""
+
msgid "Forwarding mode"
msgstr ""
msgid "Frame Bursting"
msgstr ""
+msgid "Free"
+msgstr ""
+
msgid "Free space"
msgstr ""
msgid "Frequency Hopping"
msgstr ""
+msgid "Gateway"
+msgstr ""
+
+msgid "Gateway ports"
+msgstr ""
+
msgid "General"
msgstr "Général"
msgid "General Settings"
msgstr ""
-#, fuzzy
msgid "General Setup"
-msgstr "Général"
+msgstr ""
+
+msgid "Given password confirmation did not match, password not changed!"
+msgstr ""
msgid "Go to relevant configuration page"
msgstr "Aller à la page de configuration correspondante"
msgstr ""
"Ici, vous pouvez personnaliser les réglages et les fonctionnalités de LuCI."
-msgid ""
-"Here you can find information about the current system status like <abbr "
-"title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory usage "
-"or network interface data."
-msgstr ""
-"Ici, vous trouverez des informations sur l'état actuel du système comme la "
-"fréquence processeur, utilisation mémoire et trafic réseau."
-
msgid ""
"Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys (one "
"per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
"Vous pouvez copier ici des clés SSH publiques (une par ligne) pour une "
"authentification SSH sur clés publiques."
+msgid ""
+"Here you can paste public SSH-Keys (one per line) for SSH public-key "
+"authentication."
+msgstr ""
+
msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgstr "Cacher le ESSID"
msgid "Host entries"
msgstr "Entrées d'hôtes"
+msgid "Host expiry timeout"
+msgstr ""
+
msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
msgstr "adresse IP ou réseau"
msgid "Hostnames"
msgstr "Noms d'hôtes"
-#, fuzzy
msgid "ID"
-msgstr "Bridger les interfaces"
+msgstr ""
msgid "IP Configuration"
msgstr ""
msgid "IPv4"
msgstr ""
+msgid "IPv4 Firewall"
+msgstr ""
+
+msgid "IPv4 WAN Status"
+msgstr ""
+
msgid "IPv4-Address"
msgstr ""
msgid "IPv6"
msgstr ""
+msgid "IPv6 Firewall"
+msgstr ""
+
msgid "IPv6 Setup"
msgstr ""
+msgid "IPv6 WAN Status"
+msgstr ""
+
msgid "Identity"
msgstr "Identité"
msgid "Info"
msgstr ""
+msgid "Initscript"
+msgstr "Script d'initialisation"
+
+msgid "Initscripts"
+msgstr "Scripts d'initialisation"
+
msgid "Install"
msgstr "Installer"
msgid "Interface Overview"
msgstr ""
-#, fuzzy
msgid "Interface Status"
msgstr ""
-"Ici, vous trouverez des informations sur l'état actuel du système comme la "
-"fréquence processeur, utilisation mémoire et trafic réseau."
msgid "Interface is reconnecting..."
msgstr ""
msgid "Java Script required!"
msgstr ""
-#, fuzzy
msgid "Join Network"
-msgstr "Réseau"
+msgstr ""
msgid "Join Network: Settings"
msgstr ""
msgid "Kernel Log"
msgstr "Journal du noyau"
+msgid "Kernel Version"
+msgstr ""
+
msgid "Key"
msgstr "Clé"
msgid "Limit"
msgstr "Limite"
-#, fuzzy
msgid "Link"
-msgstr "Lien établi"
+msgstr "Lien"
msgid "Link On"
msgstr "Lien établi"
msgid "List of domains to allow RFC1918 responses for"
msgstr ""
+msgid "Listen only on the given interface or, if unspecified, on all"
+msgstr ""
+
msgid "Listening port for inbound DNS queries"
msgstr ""
msgid "Load"
msgstr "Charger"
+msgid "Load Average"
+msgstr ""
+
msgid "Loading"
msgstr ""
+msgid "Local Startup"
+msgstr ""
+
msgid "Local Time"
msgstr "Heure Locale"
msgid "MAC-Address Filter"
msgstr ""
-#, fuzzy
msgid "MAC-Filter"
-msgstr "Filtrer"
+msgstr ""
msgid "MAC-List"
msgstr ""
msgid "Mount Point"
msgstr "Point de montage"
-#, fuzzy
msgid "Mount Points"
msgstr "Point de montage"
msgid "Mounted file systems"
msgstr "Systèmes de fichiers montés"
+msgid "Move down"
+msgstr ""
+
+msgid "Move up"
+msgstr ""
+
msgid "Multicast Rate"
msgstr ""
msgid "Name of the new interface"
msgstr ""
-#, fuzzy
msgid "Name of the new network"
-msgstr " - Créer un nouveau réseau - "
+msgstr ""
msgid "Navigation"
msgstr ""
+msgid "Netmask"
+msgstr ""
+
msgid "Network"
msgstr "Réseau"
msgid "Outdoor Channels"
msgstr ""
+msgid "Override Gateway"
+msgstr ""
+
msgid ""
"Override the netmask sent to clients. Normally it is calculated from the "
"subnet that is served."
msgid "PIN code"
msgstr "code PIN"
-#, fuzzy
msgid "PPP Settings"
-msgstr "Réglages"
+msgstr ""
msgid "PPPoA Encapsulation"
msgstr "PPPoA Encapsulation"
msgid "Password successfully changed"
msgstr "Mot de passe changé avec succès"
+msgid "Password successfully changed!"
+msgstr ""
+
msgid "Path to CA-Certificate"
msgstr "Chemin de la CA"
msgid "Perform reboot"
msgstr "Redémarrer"
-#, fuzzy
msgid "Physical Settings"
-msgstr "Paramètres de base"
+msgstr ""
-#, fuzzy
msgid "Pkts."
-msgstr "Ports"
+msgstr ""
msgid "Please enter your username and password."
msgstr "Saisissez votre nom d'utilisateur et mot de passe."
msgid "Regulatory Domain"
msgstr ""
+msgid "Relay Settings"
+msgstr ""
+
+msgid "Relay between networks"
+msgstr ""
+
msgid "Remove"
msgstr "Désinstaller"
msgid "Resolve file"
msgstr ""
+msgid "Restart"
+msgstr "Redémarrer"
+
msgid "Restart Firewall"
msgstr ""
msgid "Root directory for files served via TFTP"
msgstr ""
+msgid "Router Model"
+msgstr ""
+
+msgid "Router Name"
+msgstr ""
+
+msgid "Router Password"
+msgstr ""
+
#, fuzzy
msgid "Routes"
msgstr "Route"
"Avec les routes statiques vous pouvez spécifier à travers quelle interface "
"ou passerelle un réseau peut être contacté."
+msgid "Routing table ID"
+msgstr ""
+
msgid "Rule #"
msgstr ""
msgid "Run filesystem check"
msgstr ""
+msgid "SSH Access"
+msgstr ""
+
+msgid "SSH-Keys"
+msgstr ""
+
msgid "SSID"
msgstr ""
#, fuzzy
msgid "STP"
-msgstr "Bridger les interfaces"
+msgstr ""
msgid "Save"
msgstr "Sauvegarder"
msgid "Save & Apply"
msgstr "Sauvegarder et Appliquer"
+msgid "Save & Apply"
+msgstr ""
+
msgid "Scan"
msgstr "Scan"
msgid "Scheduled Tasks"
msgstr "Tâches Régulières"
-msgid "Search file..."
-msgstr "Chercher un fichier..."
-
msgid ""
"Seconds to wait for the modem to become ready before attempting to connect"
msgstr ""
msgid "See \"mount\" manpage for details"
msgstr ""
+msgid "Send Router Solicitiations"
+msgstr ""
+
msgid "Separate Clients"
msgstr ""
msgid "Separate WDS"
msgstr ""
-msgid "Server"
+msgid "Server IPv4-Address"
msgstr ""
-msgid "Server IPv4-Address"
+msgid "Server Settings"
msgstr ""
msgid "Service type"
"Sorry. OpenWrt does not support a system upgrade on this platform.<br /> You "
"need to manually flash your device."
+msgid "Sort"
+msgstr ""
+
msgid "Source"
msgstr "Source"
msgid "Specifies the directory the device is attached to"
msgstr ""
+msgid "Specifies the listening port of this <em>Dropbear</em> instance"
+msgstr ""
+
msgid "Specify additional command line arguments for pppd here"
msgstr ""
"Spécifiez ici des arguments de ligne de commande supplémentaire pour pppd"
msgid "Start"
msgstr "Démarrer"
+msgid "Start priority"
+msgstr "Priorité de démarrage"
+
+msgid "Startup"
+msgstr ""
+
msgid "Static IPv4 Routes"
msgstr "Routes IPv4 statiques"
msgid "Status"
msgstr "Status"
+msgid "Stop"
+msgstr "Arrêter"
+
msgid "Strict order"
msgstr "Ordre stricte"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been comitted"
+msgid "The following changes have been committed"
msgstr ""
msgid "The following changes have been reverted"
"include during sysupgrade"
msgstr ""
+msgid ""
+"This is the content of /etc/rc.local. Insert your own commands here (in "
+"front of 'exit 0') to execute them at the end of the boot process."
+msgstr ""
+
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"abbr> in the local network"
msgid "Timezone"
msgstr "Fuseau horaire"
+msgid "Total Available"
+msgstr ""
+
msgid "Traffic"
msgstr "Trafic"
msgid "UDP:"
msgstr ""
+msgid "USB Device"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid "Unknown Error"
msgstr "Erreur inconnue"
+msgid "Unknown Error, password not changed!"
+msgstr ""
+
msgid "Unsaved Changes"
msgstr "Changements non appliqués"
msgid "Wifi networks in your local environment"
msgstr "Réseaux Wi-Fi dans votre environnement"
+msgid "Wireless"
+msgstr ""
+
msgid "Wireless Adapter"
msgstr ""
-#, fuzzy
msgid "Wireless Network"
-msgstr "Créer un réseau"
+msgstr ""
-#, fuzzy
msgid "Wireless Overview"
-msgstr "Vue d'ensemble"
+msgstr ""
msgid "Wireless Security"
msgstr ""
msgid "XR Support"
msgstr ""
+msgid ""
+"You can enable or disable installed init scripts here. Changes will applied "
+"after a device reboot.<br /><strong>Warning: If you disable essential init "
+"scripts like \"network\", your device might become inaccesable!</strong>"
+msgstr ""
+"Vous pouvez ici activer ou désactiver les scripts d'initialisation "
+"installés. Les changements seront pris en compte après un redémarrage.<br/"
+"><strong>Attention: Si vous désactivez des scripts essentiels comme \"réseau"
+"\", votre équipement pourrait ne plus être accessible !</strong>"
+
msgid ""
"You can specify multiple DNS servers here, press enter to add a new entry. "
"Servers entered here will override automatically assigned ones."
msgid "« Back"
msgstr ""
+#~ msgid ""
+#~ "Also kernel or service logfiles can be viewed here to get an overview "
+#~ "over their current state."
+#~ msgstr ""
+#~ "Les journaux des services ou du noyau peuvent être vus ici afin d'obtenir "
+#~ "un aperçu de leur état."
+
+#~ msgid ""
+#~ "Here you can find information about the current system status like <abbr "
+#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
+#~ "usage or network interface data."
+#~ msgstr ""
+#~ "Ici, vous trouverez des informations sur l'état actuel du système comme "
+#~ "la fréquence processeur, utilisation mémoire et trafic réseau."
+
+#~ msgid "Search file..."
+#~ msgstr "Chercher un fichier..."
+
#~ msgid ""
#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
projects / project / luci.git / blobdiff