msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
msgstr ""
-msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-msgstr ""
-
msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
msgstr ""
msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
msgstr ""
-msgid "AHCP Settings"
+msgid "APN"
msgstr ""
msgid "AR Support"
msgstr ""
-msgid "ARP ping retries"
+msgid "ARP retry threshold"
msgstr ""
msgid "ATM Bridges"
msgstr ""
-msgid "ATM Settings"
-msgstr ""
-
msgid "ATM Virtual Channel Identifier (VCI)"
msgstr ""
msgid "ATM device number"
msgstr ""
-msgid "Accept Router Advertisements"
+msgid "Accept router advertisements"
msgstr ""
-msgid "Access Point"
+msgid "Access Concentrator"
msgstr ""
-msgid "Access point (APN)"
+msgid "Access Point"
msgstr ""
msgid "Action"
msgid "Additional Hosts files"
msgstr ""
-msgid "Additional pppd options"
+msgid "Address"
msgstr ""
-msgid "Address"
+msgid "Address to access local relay bridge"
msgstr ""
msgid "Administration"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
-msgid "Allowed range is 1 to FFFF"
+msgid "Allowed range is 1 to 65535"
msgstr ""
msgid "An additional network will be created if you leave this unchecked."
msgid "Authorization Required"
msgstr ""
-msgid "Automatic Disconnect"
+msgid "Auto Refresh"
msgstr ""
msgid "Available"
msgid "Back to Overview"
msgstr ""
+msgid "Back to configuration"
+msgstr ""
+
msgid "Back to overview"
msgstr ""
msgid "Background Scan"
msgstr ""
+msgid "Backup / Flash Firmware"
+msgstr ""
+
msgid "Backup / Restore"
msgstr ""
-msgid "Backup Archive"
+msgid "Backup file list"
msgstr ""
msgid "Bad address specified!"
msgstr ""
+msgid ""
+"Below is the determined list of files to backup. It consists of changed "
+"configuration files marked by opkg, essential base files and the user "
+"defined backup patterns."
+msgstr ""
+
msgid "Bit Rate"
msgstr ""
"em> field to define a new network."
msgstr ""
+msgid ""
+"Click \"Generate archive\" to download a tar archive of the current "
+"configuration files. To reset the firmware to its initial state, click "
+"\"Perform reset\" (only possible with squashfs images)."
+msgstr ""
+
msgid "Client"
msgstr ""
+msgid "Client ID to send when requesting DHCP"
+msgstr ""
+
+msgid ""
+"Close inactive connection after the given amount of seconds, use 0 to "
+"persist connection"
+msgstr ""
+
+msgid "Close list..."
+msgstr ""
+
msgid "Collecting data..."
msgstr ""
msgid "Configuration files will be kept."
msgstr ""
-msgid ""
-"Configure the local DNS server to use the name servers adverticed by the PPP "
-"peer"
-msgstr ""
-
msgid "Configures this mount as overlay storage for block-extroot"
msgstr ""
msgid "Connect"
msgstr ""
-msgid "Connect script"
-msgstr ""
-
msgid "Connected"
msgstr ""
msgid "Connection Limit"
msgstr ""
+msgid "Connections"
+msgstr ""
+
msgid "Country"
msgstr ""
msgid "Create a bridge over multiple interfaces"
msgstr ""
-msgid "Create backup"
-msgstr ""
-
msgid "Critical"
msgstr ""
msgid "DHCP and DNS"
msgstr ""
+msgid "DHCP client"
+msgstr ""
+
msgid "DHCP-Options"
msgstr ""
msgid "Debug"
msgstr ""
-msgid "Default"
+msgid "Default %d"
+msgstr ""
+
+msgid "Default gateway"
msgstr ""
msgid "Default state"
msgid "Discard upstream RFC1918 responses"
msgstr ""
-msgid "Disconnect script"
+msgid "Displaying only packages containing"
msgstr ""
msgid "Distance Optimization"
msgid "Download and install package"
msgstr ""
+msgid "Download backup"
+msgstr ""
+
msgid "Dropbear Instance"
msgstr ""
msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgstr ""
+msgid "Dynamic tunnel"
+msgstr ""
+
msgid ""
"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
"having static leases will be served."
msgid "Edit"
msgstr ""
-msgid "Edit package lists and installation targets"
-msgstr ""
-
msgid "Edit this interface"
msgstr ""
msgid "Enable"
msgstr ""
-msgid "Enable 4K VLANs"
+msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgstr ""
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
+msgid "Enable HE.net dynamic endpoint update"
msgstr ""
-msgid "Enable IPv6 on PPP link"
+msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable Jumbo Frame passthrough"
msgid "Enable VLAN functionality"
msgstr ""
+msgid "Enable buffering"
+msgstr ""
+
+msgid "Enable builtin NTP server"
+msgstr ""
+
msgid "Enable learning and aging"
msgstr ""
msgid "Encryption"
msgstr ""
+msgid "Erasing..."
+msgstr ""
+
msgid "Error"
msgstr ""
msgid "Firmware Version"
msgstr ""
-msgid "Firmware image"
-msgstr ""
-
msgid "Fixed source port for outbound DNS queries"
msgstr ""
msgid "Flash Firmware"
msgstr ""
+msgid "Flash image..."
+msgstr ""
+
+msgid "Flash new firmware image"
+msgstr ""
+
+msgid "Flash operations"
+msgstr ""
+
+msgid "Flashing..."
+msgstr ""
+
msgid "Force"
msgstr ""
msgid "Force DHCP on this network even if another server is detected."
msgstr ""
-msgid "Forward DHCP"
+msgid "Forward DHCP traffic"
msgstr ""
-msgid "Forward broadcasts"
+msgid "Forward broadcast traffic"
msgstr ""
msgid "Forwarding mode"
msgid "General Setup"
msgstr ""
+msgid "Generate archive"
+msgstr ""
+
msgid "Given password confirmation did not match, password not changed!"
msgstr ""
+msgid "Go to password configuration..."
+msgstr ""
+
msgid "Go to relevant configuration page"
msgstr ""
-msgid "HE.net Tunnel ID"
+msgid "HE.net password"
+msgstr ""
+
+msgid "HE.net user ID"
msgstr ""
msgid "HT capabilities"
msgid "Hang Up"
msgstr ""
-msgid ""
-"Here you can backup and restore your router configuration and - if possible "
-"- reset the router to the default settings."
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "Hostname"
msgstr ""
+msgid "Hostname to send when requesting DHCP"
+msgstr ""
+
msgid "Hostnames"
msgstr ""
msgid "IPv4 WAN Status"
msgstr ""
+msgid "IPv4 address"
+msgstr ""
+
msgid "IPv4 and IPv6"
msgstr ""
+msgid "IPv4 broadcast"
+msgstr ""
+
+msgid "IPv4 gateway"
+msgstr ""
+
+msgid "IPv4 netmask"
+msgstr ""
+
msgid "IPv4 only"
msgstr ""
msgid "IPv6 WAN Status"
msgstr ""
+msgid "IPv6 address"
+msgstr ""
+
+msgid "IPv6 gateway"
+msgstr ""
+
msgid "IPv6 only"
msgstr ""
+msgid "IPv6-in-IPv4 (RFC4213)"
+msgstr ""
+
+msgid "IPv6-over-IPv4"
+msgstr ""
+
msgid "Identity"
msgstr ""
"device node"
msgstr ""
+msgid "If unchecked, no default route is configured"
+msgstr ""
+
+msgid "If unchecked, the advertised DNS server addresses are ignored"
+msgstr ""
+
msgid ""
"If your physical memory is insufficient unused data can be temporarily "
"swapped to a swap-device resulting in a higher amount of usable <abbr title="
msgid "Ignore resolve file"
msgstr ""
+msgid "Image"
+msgstr ""
+
msgid "In"
msgstr ""
+msgid "Inactivity timeout"
+msgstr ""
+
msgid "Inbound:"
msgstr ""
msgid "Install"
msgstr ""
-msgid "Installation targets"
+msgid "Install package %q"
+msgstr ""
+
+msgid "Install protocol extensions..."
msgstr ""
msgid "Installed packages"
msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
msgstr ""
+msgid "Invalid VLAN ID given! Only unique IDs are allowed"
+msgstr ""
+
msgid "Invalid username and/or password! Please try again."
msgstr ""
msgid "Join Network: Wireless Scan"
msgstr ""
-msgid "Keep configuration files"
-msgstr ""
-
-msgid "Keep-Alive"
-msgstr ""
-
-msgid "Kernel"
+msgid "Keep settings"
msgstr ""
msgid "Kernel Log"
msgid "Kill"
msgstr ""
+msgid "LCP echo failure threshold"
+msgstr ""
+
+msgid "LCP echo interval"
+msgstr ""
+
msgid "LLC"
msgstr ""
msgid "Leasetime remaining"
msgstr ""
-msgid "Legend:"
-msgstr ""
-
-msgid ""
-"Let pppd replace the current default route to use the PPP interface after "
-"successful connect"
+msgid "Leave empty to autodetect"
msgstr ""
-msgid "Let pppd run this script after establishing the PPP link"
+msgid "Leave empty to use the current WAN address"
msgstr ""
-msgid "Let pppd run this script before tearing down the PPP link"
+msgid "Legend:"
msgstr ""
msgid "Limit"
msgid "Loading"
msgstr ""
+msgid "Local IPv4 address"
+msgstr ""
+
+msgid "Local IPv6 address"
+msgstr ""
+
msgid "Local Startup"
msgstr ""
msgid "Localise queries"
msgstr ""
+msgid "Locked to channel %d used by %s"
+msgstr ""
+
msgid "Log output level"
msgstr ""
msgid "MTU"
msgstr ""
-msgid ""
-"Make sure that you provide the correct pin code here or you might lock your "
-"sim card!"
-msgstr ""
-
msgid "Maximum Rate"
msgstr ""
msgid "Maximum allowed size of EDNS.0 UDP packets"
msgstr ""
+msgid "Maximum amount of seconds to wait for the modem to become ready"
+msgstr ""
+
msgid "Maximum hold time"
msgstr ""
msgid "Minimum hold time"
msgstr ""
+msgid "Missing protocol extension for proto %q"
+msgstr ""
+
msgid "Mode"
msgstr ""
msgid "Modem device"
msgstr ""
-msgid "Monitor"
+msgid "Modem init timeout"
msgstr ""
-msgid ""
-"Most of them are network servers, that offer a certain service for your "
-"device or network like shell access, serving webpages like <abbr title=\"Lua "
-"Configuration Interface\">LuCI</abbr>, doing mesh routing, sending e-"
-"mails, ..."
+msgid "Monitor"
msgstr ""
msgid "Mount Entry"
msgid "NAS ID"
msgstr ""
+msgid "NTP server candidates"
+msgstr ""
+
msgid "Name"
msgstr ""
msgid "No network configured on this device"
msgstr ""
+msgid "No network name specified"
+msgstr ""
+
+msgid "No package lists available"
+msgstr ""
+
msgid "No password set!"
msgstr ""
msgid "Notice"
msgstr ""
-msgid "Number of failed connection tests to initiate automatic reconnect"
-msgstr ""
-
msgid "OK"
msgstr ""
msgid "Open"
msgstr ""
+msgid "Open list..."
+msgstr ""
+
msgid "Option changed"
msgstr ""
msgid "Outdoor Channels"
msgstr ""
-msgid "Override Gateway"
+msgid "Override MAC address"
+msgstr ""
+
+msgid "Override MTU"
+msgstr ""
+
+msgid "Override the gateway in DHCP responses"
msgstr ""
msgid ""
"subnet that is served."
msgstr ""
+msgid "Override the table used for internal routes"
+msgstr ""
+
msgid "Overview"
msgstr ""
msgid "Owner"
msgstr ""
+msgid "PAP/CHAP password"
+msgstr ""
+
+msgid "PAP/CHAP username"
+msgstr ""
+
msgid "PID"
msgstr ""
-msgid "PIN code"
+msgid "PIN"
msgstr ""
-msgid "PPP Settings"
+msgid "PPP"
msgstr ""
msgid "PPPoA Encapsulation"
msgstr ""
+msgid "PPPoATM"
+msgstr ""
+
+msgid "PPPoE"
+msgstr ""
+
+msgid "PPtP"
+msgstr ""
+
msgid "Package libiwinfo required!"
msgstr ""
-msgid "Package lists"
+msgid "Package lists are older than 24 hours"
msgstr ""
msgid "Package name"
msgid "Perform reboot"
msgstr ""
+msgid "Perform reset"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Port %d is untagged in multiple VLANs!"
msgstr ""
-msgid ""
-"Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default VLAN "
-"ID added to received untagged frames."
-msgstr ""
-
-msgid "Port PVIDs on %q"
-msgstr ""
-
msgid "Post-commit actions"
msgstr ""
msgid "Power"
msgstr ""
-msgid "Prevents client-to-client communication"
+msgid ""
+"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
+"ignore failures"
msgstr ""
-msgid "Proceed"
+msgid "Prevents client-to-client communication"
msgstr ""
-msgid "Proceed reverting all settings and resetting to firmware defaults?"
+msgid "Proceed"
msgstr ""
msgid "Processes"
msgstr ""
-msgid "Processor"
-msgstr ""
-
msgid "Prot."
msgstr ""
msgid "Protocol family"
msgstr ""
+msgid "Protocol of the new interface"
+msgstr ""
+
+msgid "Protocol support is not installed"
+msgstr ""
+
msgid "Provide new network"
msgstr ""
msgid "RX"
msgstr ""
-msgid "Radius-Port"
+msgid "Radius-Accounting-Port"
+msgstr ""
+
+msgid "Radius-Accounting-Secret"
+msgstr ""
+
+msgid "Radius-Accounting-Server"
+msgstr ""
+
+msgid "Radius-Authentication-Port"
+msgstr ""
+
+msgid "Radius-Authentication-Secret"
msgstr ""
-msgid "Radius-Server"
+msgid "Radius-Authentication-Server"
msgstr ""
msgid ""
"You might lose access to this router if you are connected via this network."
msgstr ""
+msgid "Really reset all changes?"
+msgstr ""
+
msgid ""
"Really shutdown interface \"%s\" ?\n"
"You might lose access to this router if you are connected via this interface."
"You might lose access to this router if you are connected via this interface."
msgstr ""
+msgid "Really switch protocol?"
+msgstr ""
+
msgid "Realtime Connections"
msgstr ""
+msgid "Realtime Graphs"
+msgstr ""
+
msgid "Realtime Load"
msgstr ""
msgid "Reboot"
msgstr ""
+msgid "Rebooting..."
+msgstr ""
+
msgid "Reboots the operating system of your device"
msgstr ""
msgid "Regulatory Domain"
msgstr ""
-msgid "Relay Settings"
+msgid "Relay"
+msgstr ""
+
+msgid "Relay Bridge"
msgstr ""
msgid "Relay between networks"
msgstr ""
-msgid "Remove"
+msgid "Relay bridge"
msgstr ""
-msgid "Repeat scan"
+msgid "Remote IPv4 address"
msgstr ""
-msgid "Replace default route"
+msgid "Remove"
+msgstr ""
+
+msgid "Repeat scan"
msgstr ""
msgid "Replace entry"
msgid "Replace wireless configuration"
msgstr ""
+msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
+msgstr ""
+
msgid "Reset"
msgstr ""
msgid "Reset Counters"
msgstr ""
-msgid "Reset router to defaults"
+msgid "Reset to defaults"
msgstr ""
msgid "Resolv and Hosts Files"
"can be reached."
msgstr ""
-msgid "Routing table ID"
-msgstr ""
-
msgid "Rule #"
msgstr ""
msgid "Scheduled Tasks"
msgstr ""
-msgid ""
-"Seconds to wait for the modem to become ready before attempting to connect"
-msgstr ""
-
msgid "Section added"
msgstr ""
msgid "See \"mount\" manpage for details"
msgstr ""
-msgid "Send Router Solicitiations"
+msgid ""
+"Send LCP echo requests at the given interval in seconds, only effective in "
+"conjunction with failure threshold"
msgstr ""
-msgid "Separate Clients"
+msgid "Send router solicitations"
msgstr ""
-msgid "Separate WDS"
+msgid "Separate Clients"
msgstr ""
-msgid "Server IPv4-Address"
+msgid "Separate WDS"
msgstr ""
msgid "Server Settings"
msgstr ""
-msgid "Service type"
+msgid "Service Name"
msgstr ""
-msgid "Services"
+msgid "Service Type"
msgstr ""
-msgid "Services and daemons perform certain tasks on your device."
-msgstr ""
-
-msgid "Settings"
+msgid "Services"
msgstr ""
msgid "Setup DHCP Server"
msgstr ""
-msgid "Setup wait time"
+msgid "Show current backup file list"
msgstr ""
msgid "Shutdown this interface"
msgstr ""
msgid ""
-"Sorry. OpenWrt does not support a system upgrade on this platform.<br /> You "
-"need to manually flash your device."
+"Sorry, there is no sysupgrade support present, a new firmware image must be "
+"flashed manually. Please refer to the OpenWrt wiki for device specific "
+"install instructions."
msgstr ""
msgid "Sort"
msgid "Source"
msgstr ""
+msgid "Specifies the advertised preferred prefix lifetime in seconds"
+msgstr ""
+
+msgid "Specifies the advertised valid prefix lifetime in seconds"
+msgstr ""
+
msgid "Specifies the button state to handle"
msgstr ""
msgid "Specifies the listening port of this <em>Dropbear</em> instance"
msgstr ""
-msgid "Specify additional command line arguments for pppd here"
+msgid ""
+"Specifies the maximum amount of failed ARP requests until hosts are presumed "
+"to be dead"
+msgstr ""
+
+msgid ""
+"Specifies the maximum amount of seconds after which hosts are presumed to be "
+"dead"
msgstr ""
msgid "Specify the secret encryption key here."
msgid "Static WDS"
msgstr ""
+msgid "Static address"
+msgstr ""
+
msgid ""
"Static leases are used to assign fixed IP addresses and symbolic hostnames "
"to DHCP clients. They are also required for non-dynamic interface "
msgid "Switch %q"
msgstr ""
+msgid "Switch %q (%s)"
+msgstr ""
+
+msgid "Switch protocol"
+msgstr ""
+
+msgid "Sync with browser"
+msgstr ""
+
+msgid "Synchronizing..."
+msgstr ""
+
msgid "System"
msgstr ""
msgid "TFTP server root"
msgstr ""
-msgid "TTL"
-msgstr ""
-
msgid "TX"
msgstr ""
"</abbr> <code>/dev/sda1</code>)"
msgstr ""
-msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-msgstr ""
-
msgid ""
"The filesystem that was used to format the memory (<abbr title=\"for example"
"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
msgid "The following rules are currently active on this system."
msgstr ""
+msgid "The given network name is not unique"
+msgstr ""
+
msgid ""
"The hardware is not multi-SSID capable and existing configuration will be "
"replaced if you proceed."
"next greater network like the internet and other ports for a local network."
msgstr ""
+msgid "The selected protocol needs a device assigned"
+msgstr ""
+
+msgid ""
+"The system is erasing the configuration partition now and will reboot itself "
+"when finished."
+msgstr ""
+
msgid ""
"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
"few minutes until you try to reconnect. It might be necessary to renew the "
msgid "There are no pending changes!"
msgstr ""
+msgid ""
+"There is no device assigned yet, please attach a network device in the "
+"\"Physical Settings\" tab"
+msgstr ""
+
msgid ""
"There is no password set on this router. Please configure a root password to "
"protect the web interface and enable SSH."
"include during sysupgrade"
msgstr ""
+msgid ""
+"This is a list of shell glob patterns for matching files and directories to "
+"include during sysupgrade. Modified files in /etc/config/ and certain other "
+"configurations are automatically preserved."
+msgstr ""
+
+msgid "This is the 32 byte hex encoded user ID, not the login name"
+msgstr ""
+
msgid ""
"This is the content of /etc/rc.local. Insert your own commands here (in "
"front of 'exit 0') to execute them at the end of the boot process."
msgstr ""
+msgid ""
+"This is the local endpoint address assigned by the tunnel broker, it usually "
+"ends with <code>:2</code>"
+msgstr ""
+
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"abbr> in the local network"
msgid "This is the system crontab in which scheduled tasks can be defined."
msgstr ""
+msgid ""
+"This is usually the address of the nearest PoP operated by the tunnel broker"
+msgstr ""
+
msgid ""
"This list gives an overview over currently running system processes and "
"their status."
msgid "This section contains no values yet"
msgstr ""
-msgid "Time (in seconds) after which an unused connection will be closed"
+msgid "Time Synchronization"
msgstr ""
-msgid "Time Server (rdate)"
+msgid "Timezone"
msgstr ""
-msgid "Timezone"
+msgid ""
+"To restore configuration files, you can upload a previously generated backup "
+"archive here."
msgstr ""
msgid "Total Available"
msgid "Trigger Mode"
msgstr ""
-msgid "Tunnel Interface"
+msgid "Tunnel ID"
msgstr ""
-msgid "Tunnel Settings"
+msgid "Tunnel Interface"
msgstr ""
msgid "Turbo Mode"
msgid "UDP:"
msgstr ""
+msgid "UMTS/GPRS/EV-DO"
+msgstr ""
+
msgid "USB Device"
msgstr ""
msgid "UUID"
msgstr ""
+msgid "Unknown"
+msgstr ""
+
msgid "Unknown Error, password not changed!"
msgstr ""
+msgid "Unmanaged"
+msgstr ""
+
msgid "Unsaved Changes"
msgstr ""
-msgid "Update package lists"
+msgid "Unsupported protocol type."
msgstr ""
-msgid "Upload an OpenWrt image file to reflash the device."
+msgid "Update lists"
msgstr ""
-msgid "Upload image"
+msgid ""
+"Upload a sysupgrade-compatible image here to replace the running firmware. "
+"Check \"Keep settings\" to retain the current configuration (requires an "
+"OpenWrt compatible firmware image)."
+msgstr ""
+
+msgid "Upload archive..."
msgstr ""
msgid "Uploaded File"
msgid "Use <code>/etc/ethers</code>"
msgstr ""
+msgid "Use DHCP gateway"
+msgstr ""
+
+msgid "Use DNS servers advertised by peer"
+msgstr ""
+
msgid "Use ISO/IEC 3166 alpha2 country codes."
msgstr ""
+msgid "Use MTU on tunnel interface"
+msgstr ""
+
+msgid "Use TTL on tunnel interface"
+msgstr ""
+
msgid "Use as root filesystem"
msgstr ""
-msgid "Use peer DNS"
+msgid "Use broadcast flag"
+msgstr ""
+
+msgid "Use custom DNS servers"
+msgstr ""
+
+msgid "Use default gateway"
+msgstr ""
+
+msgid "Use gateway metric"
+msgstr ""
+
+msgid "Use preferred lifetime"
+msgstr ""
+
+msgid "Use routing table"
msgstr ""
msgid ""
"requesting host."
msgstr ""
+msgid "Use valid lifetime"
+msgstr ""
+
msgid "Used"
msgstr ""
msgid "VC-Mux"
msgstr ""
-msgid "VLAN %d"
-msgstr ""
-
msgid "VLAN Interface"
msgstr ""
msgid "VLANs on %q"
msgstr ""
+msgid "VLANs on %q (%s)"
+msgstr ""
+
+msgid "VPN Server"
+msgstr ""
+
+msgid "Vendor Class to send when requesting DHCP"
+msgstr ""
+
+msgid "Verify"
+msgstr ""
+
msgid "Version"
msgstr ""
"scripts like \"network\", your device might become inaccesable!</strong>"
msgstr ""
-msgid ""
-"You can specify multiple DNS servers here, press enter to add a new entry. "
-"Servers entered here will override automatically assigned ones."
-msgstr ""
-
msgid ""
"You must enable Java Script in your browser or LuCI will not work properly."
msgstr ""
-msgid ""
-"You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-"\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-msgstr ""
-
msgid "any"
msgstr ""
msgid "auto"
msgstr ""
-msgid "back"
-msgstr ""
-
msgid "bridged"
msgstr ""
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
msgid "creates a bridge over specified interface(s)"
msgstr ""
"abbr>-leases will be stored"
msgstr ""
-msgid "free"
-msgstr ""
-
msgid "help"
msgstr ""
msgid "off"
msgstr ""
-msgid "routed"
+msgid "on"
msgstr ""
-msgid "static"
+msgid "routed"
msgstr ""
msgid "tagged"
projects / project / luci.git / blobdiff