"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2012-02-25 08:06+0200\n"
-"Last-Translator: Cye3s <cye3s.cy@gmail.com>\n"
+"PO-Revision-Date: 2012-09-29 10:37+0200\n"
+"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
+"X-Generator: Pootle 2.0.6\n"
+
+msgid "%s in %s"
+msgstr "%s 位于 %s"
msgid "%s%s with %s"
-msgstr ""
+msgstr "%s%s 和 %s"
+
+msgid "%s, %s in %s"
+msgstr "%s, %s 位于 %s"
msgid "(Unnamed Entry)"
-msgstr ""
+msgstr "(未命名条目)"
msgid "(Unnamed Rule)"
-msgstr ""
+msgstr "(未命名规则)"
msgid "(Unnamed SNAT)"
-msgstr ""
+msgstr "(未命名SNAT)"
msgid "-- Please choose --"
-msgstr ""
+msgstr "-- 请选择 --"
msgid "-- custom --"
-msgstr ""
+msgstr "-- 自定义 --"
msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
+msgstr "<var>%d</var> 包.每 <var>%s</var>"
msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
+msgstr "<var>%d</var> 包. 每 <var>%s</var>, 突发 <var>%d</var> 包."
msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Accept forward"
-msgstr ""
-
-msgid "Accept input"
-msgstr ""
+msgstr "<var>%s</var> 并且限制到 %s"
msgid "Action"
msgstr "动作"
msgid "Add"
-msgstr ""
+msgstr "添加"
msgid "Add and edit..."
-msgstr ""
+msgstr "添加并编辑..."
msgid "Advanced Settings"
msgstr "高级设置"
msgid "Allow forward from <em>source zones</em>:"
-msgstr "允许从<em>source zones</em>转发"
+msgstr "允许从<em>源区域</em>转发"
msgid "Allow forward to <em>destination zones</em>:"
-msgstr "允许转发到<em>source zones</em>"
+msgstr "允许转发到<em>目标区域</em>"
msgid "Any"
msgstr "任何"
"otherwise covered by the firewall framework. The commands are executed after "
"each firewall restart, right after the default ruleset has been loaded."
msgstr ""
-
-msgid "Destination"
-msgstr "目标"
+"自定义规则允许运行一些防火墙没有包含的功能。这些命令将在每次重启防火墙时，在"
+"默认的规则运行后立即执行。"
msgid "Destination IP address"
msgstr "目标IP地址"
msgid "Destination zone"
msgstr "目标区域"
-msgid "Disable"
-msgstr "禁用"
-
-msgid "Discard forward"
-msgstr ""
-
-msgid "Discard input"
-msgstr ""
-
msgid "Do not rewrite"
-msgstr ""
-
-msgid "Do not track forward"
-msgstr "不要追踪转发"
-
-msgid "Do not track input"
-msgstr "不要追踪进入"
+msgstr "不填写=（所有端口）"
msgid "Drop invalid packets"
msgstr "丢弃无效数据包"
msgid "External port"
msgstr "外部端口"
+msgid "External zone"
+msgstr "外部区域"
+
msgid "Extra arguments"
msgstr "附加参数"
-msgid "Family"
-msgstr "地址集合"
-
msgid "Firewall"
msgstr "防火墙"
msgstr "防火墙 - 端口转发"
msgid "Firewall - Traffic Rules"
-msgstr "防火墙 - 通讯规则"
+msgstr "防火墙 - 通信规则"
msgid "Firewall - Zone Settings"
msgstr "防火墙-区域设置"
msgid "Forward"
msgstr "转发"
-msgid "Forward to %s in %s"
-msgstr "转发到 %s 位于 %s"
-
-msgid "Forward to %s, %s in %s"
-msgstr "转发到 %s, %s 位于 %s"
+msgid "Forward to"
+msgstr "转发到"
msgid "From %s in %s"
msgstr "来自 %s 位于 %s"
msgstr "来自 %s 位于 %s 带源 %s 并且 %s"
msgid "General Settings"
-msgstr "标准设置"
-
-msgid "IP"
-msgstr "IP"
-
-msgid "IP range"
-msgstr "IP范围"
-
-msgid "IPs"
-msgstr ""
+msgstr "基本设置"
msgid "IPv4"
msgstr "IPv4"
msgstr "仅IPv6"
msgid "Input"
-msgstr "入（路由器）"
+msgstr "入站数据"
msgid "Inter-Zone Forwarding"
msgstr "端口触发"
msgstr "内部区域"
msgid "Limit log messages"
-msgstr "限制登陆信息"
-
-msgid "MAC"
-msgstr ""
-
-msgid "MACs"
-msgstr ""
+msgstr "限制日志信息"
msgid "MSS clamping"
msgstr "MSS钳制"
msgid "Masquerading"
msgstr "IP动态伪装"
+msgid "Match"
+msgstr "匹配规则"
+
msgid "Match ICMP type"
msgstr "匹配ICMP类型"
msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
+msgstr "需要匹配转发流量到的目标端口或端口范围"
msgid ""
"Match incoming traffic directed at the given destination port or port range "
"on this host"
-msgstr "在这个主机上，匹配输入的信息指向给定的端口或者范围"
+msgstr "需要匹配入站流量到的目标端口或端口范围"
msgid ""
"Match incoming traffic originating from the given source port or port range "
"on the client host."
-msgstr ""
+msgstr "需要匹配入站流量的源端口或端口范围"
msgid "Name"
msgstr "名字"
msgstr "新建端口转发"
msgid "New source NAT"
-msgstr "新建源NAT"
+msgstr "新建Source NAT"
msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
+msgstr "需要匹配入站流量的源IP"
msgid "Only match incoming traffic from these MACs."
-msgstr ""
+msgstr "需要匹配入站流量的源MACs（可以为多个）"
msgid "Only match incoming traffic from this IP or range."
-msgstr ""
+msgstr "需要匹配入站流量的源IP或IP范围"
msgid ""
"Only match incoming traffic originating from the given source port or port "
"range on the client host"
-msgstr ""
+msgstr "需要匹配入站流量的源端口或端口范围"
msgid "Open ports on router"
-msgstr ""
+msgstr "打开路由器端口"
msgid "Other..."
msgstr "其它..."
msgid "Output"
-msgstr "出（路由器）"
+msgstr "出站数据"
msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
+msgstr "传递到iptables的额外参数。小心使用！"
msgid "Port Forwards"
msgstr "端口转发"
msgid ""
"Port forwarding allows remote computers on the Internet to connect to a "
"specific computer or service within the private LAN."
-msgstr ""
+msgstr "端口转发允许来自Internet的计算机访问私有局域网内的计算机或服务"
msgid "Protocol"
msgstr "协议"
msgid ""
"Redirect matched incoming traffic to the given port on the internal host"
-msgstr "重定向匹配到的入站流量至内部主机的指定端口"
+msgstr "重定向匹配的入站流量到内部主机的端口"
msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "重定向匹配到的入站流量至选定的内部主机"
-
-msgid "Refuse forward"
-msgstr ""
-
-msgid "Refuse input"
-msgstr ""
+msgstr "重定向匹配的入站流量到的内部主机"
msgid "Restrict Masquerading to given destination subnets"
-msgstr "限制访问指定的目标子网"
+msgstr "要限制IP动态伪装的目标子网"
msgid "Restrict Masquerading to given source subnets"
-msgstr "限制访问指定的源子网"
+msgstr "要限制IP动态伪装的源子网"
msgid "Restrict to address family"
msgstr "限制地址"
msgid "Rewrite matched traffic to the given address."
-msgstr ""
+msgstr "将匹配流量的源地址改写成指定地址"
msgid ""
"Rewrite matched traffic to the given source port. May be left empty to only "
"rewrite the IP address."
-msgstr ""
+msgstr "将匹配流量的源端口改写成指定端口。也可以留空，只改写IP地址。"
msgid "Rewrite to source %s"
-msgstr ""
+msgstr "源地址改写成 %s"
msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "Rule is disabled"
-msgstr ""
-
-msgid "Rule is enabled"
-msgstr ""
-
-msgid "SNAT"
-msgstr ""
+msgstr "源地址改写成 %s, %s"
msgid "SNAT IP address"
-msgstr ""
+msgstr "SNAT IP地址"
msgid "SNAT port"
-msgstr ""
-
-msgid "Source"
-msgstr "源"
+msgstr "SNAT 端口"
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua #
msgstr "源MAC地址"
msgid "Source NAT"
-msgstr ""
+msgstr "Source NAT"
msgid ""
"Source NAT is a specific form of masquerading which allows fine grained "
"control over the source IP used for outgoing traffic, for example to map "
"multiple WAN addresses to internal subnets."
msgstr ""
+"Source NAT是一种特殊形式的封包伪装，它允许精细的控制传出流量的源IP，例如，将"
+"多个WAN地址映射到内部子网。"
msgid "Source address"
msgstr "源地址"
"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr "这个属性用来控制区域对区域的转发规则。"
+msgstr ""
+"以下选项可以控制区域(%s)和其它区域间的转发规则。 <em>目标区域</em>接收"
+"<strong>从%q</strong>转发的流量。<em>源区域</em>匹配从<strong>目标为%q</"
+"strong>的区域的需转发流量。以下规则<em>无法转发</em>,例如：转发lan流量到wan，"
+"但是<em>不允许</em>从wan转发到lan。"
msgid ""
"This page allows you to change advanced properties of the port forwarding "
"entry. In most cases there is no need to modify those settings."
-msgstr ""
+msgstr "本页面可以更改端口转发的高级设置。大多数情况下，不需要更改这些设置。"
msgid ""
"This page allows you to change advanced properties of the traffic rule "
"entry, such as matched source and destination hosts."
-msgstr ""
+msgstr "本页面可以更改通信规则的高级设置，比如：需匹配的源主机和目标主机。"
msgid ""
"This section defines common properties of %q. The <em>input</em> and "
"forwarded traffic between different networks within the zone. <em>Covered "
"networks</em> specifies which available networks are member of this zone."
msgstr ""
-"本节定义 %q 的通用属性， <em>input</em> 和 <em>output</em>规则用于设置数据"
-"包“进”和“出”路由器（某个接口）默认的转发原则，<em>forward</em>规则用于特定"
-"（一个或多个）区域的不同子网之间的数据包转发而<em>Covered networks</em>是从属"
-"于这个区域的一个网络地址集合。"
-
-msgid "To %s"
-msgstr ""
-
-msgid "To %s at %s"
-msgstr ""
+"本节定义 %q 的通用属性， <em>入站数据</em> 和 <em>出站数据</em>规则用于设置数据包“进”和“出”路由器（某个接口）默认的转发原则"
+"，<em>转发</em>规则用于特定（一个或多个）区域的不同子网之间的数据包转发。<em>覆盖网络</em>选择从属于这个区域的网络。"
msgid "To %s at %s on <var>this device</var>"
-msgstr ""
+msgstr "到 %s at %s 位于<var>本设备</var>"
msgid "To %s in %s"
-msgstr ""
+msgstr "到 %s 位于 %s"
msgid "To %s on <var>this device</var>"
-msgstr ""
+msgstr "到 %s 位于<var>本设备</var>"
msgid "To %s, %s in %s"
-msgstr ""
+msgstr "到 %s, %s 位于 %s"
msgid "To source IP"
-msgstr ""
+msgstr "到源IP"
msgid "To source port"
-msgstr ""
+msgstr "到源端口"
msgid "Traffic Rules"
-msgstr ""
+msgstr "通信规则"
msgid ""
"Traffic rules define policies for packets traveling between different zones, "
"for example to reject traffic between certain hosts or to open WAN ports on "
"the router."
msgstr ""
+"通信规则定义了不同区域间的流量传送，例如：拒绝一些主机之间的通信、打开到WAN的"
+"端口。"
+
+msgid "Via %s"
+msgstr "通过 %s"
-msgid "Via"
-msgstr "通过"
+msgid "Via %s at %s"
+msgstr "通过 %s at %s"
msgid ""
"You may specify multiple by selecting \"-- custom --\" and then entering "
"protocols separated by space."
-msgstr ""
+msgstr "你也可以选择“--自定义--”来定义多个协议，在多个协议间需加空格。"
msgid "Zone %q"
msgstr "区域 %q"
msgstr "接受"
msgid "any"
-msgstr "任何"
+msgstr "所有"
msgid "any host"
-msgstr ""
+msgstr "所有主机"
msgid "any router IP"
-msgstr ""
+msgstr "所有路由地址"
msgid "any zone"
-msgstr ""
-
-msgid "day"
-msgstr ""
+msgstr "所有区域"
msgid "don't track"
-msgstr ""
+msgstr "无动作"
msgid "drop"
msgstr "丢弃"
-msgid "hour"
-msgstr ""
+msgid "reject"
+msgstr "拒绝"
-msgid "minute"
-msgstr ""
+#~ msgid "Destination"
+#~ msgstr "目标"
-msgid "not"
-msgstr ""
+#~ msgid "Family"
+#~ msgstr "地址集合"
-msgid "port"
-msgstr ""
+#~ msgid "Forward to %s in %s"
+#~ msgstr "转发到 %s 位于 %s"
-msgid "ports"
-msgstr ""
+#~ msgid "Forward to %s, %s in %s"
+#~ msgstr "转发到 %s, %s 位于 %s"
-msgid "reject"
-msgstr "拒绝"
+#~ msgid "Source"
+#~ msgstr "源"
-msgid "second"
-msgstr ""
+#~ msgid "Via"
+#~ msgstr "通过"
-msgid "type"
-msgstr ""
+#~ msgid "Disable"
+#~ msgstr "禁用"
-msgid "types"
-msgstr ""
+#~ msgid "Do not track forward"
+#~ msgstr "不要追踪转发"
+
+#~ msgid "Do not track input"
+#~ msgstr "不要追踪进入"
+
+#~ msgid "IP"
+#~ msgstr "IP"
+
+#~ msgid "IP range"
+#~ msgstr "IP范围"
#~ msgid "(optional)"
#~ msgstr "（可选）"
projects / project / luci.git / blobdiff