X-Git-Url: http://git.openwrt.org/?p=project%2Fluci.git;a=blobdiff_plain;f=i18n%2Fenglish%2Fluasrc%2Fi18n%2Fadmin-core.en.xml;h=ee6512b9ef7719bdc293688be23a28c3b15af6e2;hp=ebeb2bc634da0fc6453f3fe78e03a957ffc5300b;hb=76fe25932830df72b8c957c809202cf6dc75b4ff;hpb=5067e2d185bbd1fdf029a8da2a84895bbccfad02
diff --git a/i18n/english/luasrc/i18n/admin-core.en.xml b/i18n/english/luasrc/i18n/admin-core.en.xml
index ebeb2bc634..ee6512b9ef 100644
--- a/i18n/english/luasrc/i18n/admin-core.en.xml
+++ b/i18n/english/luasrc/i18n/admin-core.en.xml
@@ -72,9 +72,9 @@
If your physical memory is insufficient unused data can be temporarily swapped to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very slow process as the swap-device cannot be accessed with the high datarates of the RAM.
Firmware successfully flashed. Rebooting device...
Failed to flash
-Firmwareimage
+Firmware image
Image received. About to start flashing process. DO NOT POWER OFF THE DEVICE!
-Writing
+Writing firmware...
Flash Firmware
Keep configuration files
Sorry, this function is not (yet) available for your platform.
@@ -167,6 +167,8 @@
additional hostfile
query port
Switch
+Active Connections
+This page gives an overview over currently active network connections.
Routes
In this area you find all network-related settings.
On most routers the network switch can be freely configured and splitted up into several VLANs.
@@ -199,6 +201,19 @@
Time (in seconds) after which an unused connection will be closed
Keep-Alive
Number of failed connection tests to initiate automatic reconnect
+Modem device
+The device node of your modem, e.g. /dev/ttyUSB0
+Replace default route
+Let pppd replace the current default route to use the PPP interface after successful connect
+Use peer DNS
+Configure the local DNS server to use the name servers adverticed by the PPP peer
+Enable IPv6 on PPP link
+Connect script
+Let pppd run this script after establishing the PPP link
+Disconnect script
+Let pppd run this script before tearing down the PPP link
+Additional pppd options
+Specify additional command line arguments for pppd here
Routes specify over which interface and gateway a certain host or network can be reached.
Static Routes
Active IPv4-Routes