From: Iordan Iordanov Date: Sun, 27 Nov 2011 22:49:13 +0000 (+0000) Subject: 1) Revised a lot of wording X-Git-Tag: 0.11.0~1328 X-Git-Url: http://git.openwrt.org/?p=project%2Fluci.git;a=commitdiff_plain;h=1c2449394db9b0c93847a9f52b286163960d14cb 1) Revised a lot of wording 2) Set default for SMTP authentication to off so the interface is cleaner to begin with (when not configured). --- diff --git a/applications/luci-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua b/applications/luci-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua index f68c27f77a..62320609ad 100644 --- a/applications/luci-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua +++ b/applications/luci-pbx-voicemail/luasrc/model/cbi/pbx-voicemail.lua @@ -32,8 +32,8 @@ m = Map (modulename, translate("Voicemail Setup"), translate("Here you can configure a global voicemail for this PBX. Since this system is \ intended to run on embedded systems like routers, there is no local storage of voicemail - \ it must be sent out by email. Therefore you need to configure an outgoing mail (SMTP) server \ - (for example the SMTP server your ISP provides, or GMail), and provide a list of addresses the \ - voicemail will be sent to.")) + (for example your ISP's, Google's, or Yahoo's SMTP server), and provide a list of \ + addresses that receive recorded voicemail.")) -- Recreate the config, and restart services after changes are commited to the configuration. function m.on_after_commit(self) @@ -45,19 +45,19 @@ end ---------------------------------------------------------------------------------------------------- s = m:section(NamedSection, "global_voicemail", "voicemail", translate("Global Voicemail Setup"), translate("When you enable voicemail, you will have the opportunity to specify \ - email addresses which receive the message. You must also set up an SMTP server below.")) + email addresses that receive recorded voicemail. You must also set up an SMTP server below.")) s.anonymous = true -enable = s:option(ListValue, "enabled", translate("Enabled")) +enable = s:option(ListValue, "enabled", translate("Enable Voicemail")) enable:value("yes", translate("Yes")) enable:value("no", translate("No")) enable.default = "no" emails = s:option(DynamicList, "global_email_addresses", - translate("Email addresses to forward voicemail to")) + translate("Email Addresses that Receive Voicemail")) emails:depends("enabled", "yes") -savepath = s:option(Value, "global_save_path", translate("Directory to save voicemail into"), +savepath = s:option(Value, "global_save_path", translate("Local Storage Directory"), translate("You can also retain copies of voicemail messages on the device running \ your PBX. The path specified here will be created if it doesn't exist. \ Beware of limited space on embedded devices like routers, and enable this \ @@ -85,27 +85,27 @@ end s = m:section(NamedSection, "voicemail_smtp", "voicemail", translate("Outgoing mail (SMTP) Server"), translate("In order for this PBX to send emails containing voicemail recordings, you need to \ set up an SMTP server here. Your ISP usually provides an SMTP server for that purpose. \ - You can also set up a GMail, Yahoo, or other 3rd party SMTP server.")) + You can also set up a third party SMTP server such as the one provided by Google or Yahoo.")) s.anonymous = true -serv = s:option(Value, "smtp_server", translate("SMTP server hostname or IP address")) +serv = s:option(Value, "smtp_server", translate("SMTP Server Hostname or IP Address")) serv.datatype = "host" -port = s:option(Value, "smtp_port", translate("SMTP port number")) +port = s:option(Value, "smtp_port", translate("SMTP Port Number")) port.datatype = "port" port.default = "25" -tls = s:option(ListValue, "smtp_tls", translate("Secure connection using TLS")) +tls = s:option(ListValue, "smtp_tls", translate("Secure Connection Using TLS")) tls:value("on", translate("Yes")) tls:value("off", translate("No")) tls.default = "on" -auth = s:option(ListValue, "smtp_auth", translate("SMTP server authentication")) +auth = s:option(ListValue, "smtp_auth", translate("SMTP Server Authentication")) auth:value("on", translate("Yes")) auth:value("off", translate("No")) -auth.default = "on" +auth.default = "off" -user = s:option(Value, "smtp_user", translate("SMTP user name")) +user = s:option(Value, "smtp_user", translate("SMTP User Name")) user:depends("smtp_auth", "on") pwd = s:option(Value, "smtp_password", translate("SMTP Password"), @@ -130,8 +130,7 @@ function pwd.write(self, section, value) end ---------------------------------------------------------------------------------------------------- -s = m:section(NamedSection, "voicemail_log", "voicemail", - translate("Last Sent Voicemail Log")) +s = m:section(NamedSection, "voicemail_log", "voicemail", translate("Last Sent Voicemail Log")) s.anonymous = true s:option (DummyValue, "vmlog") diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua index a783c72e21..f36ca0eb59 100644 --- a/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua +++ b/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua @@ -199,7 +199,7 @@ function maintain_firewall_rules() end m = Map (modulename, translate("Advanced Settings"), - translate("This section contains settings which do not need to be changed under \ + translate("This section contains settings that do not need to be changed under \ normal circumstances. In addition, here you can configure your system \ for use with remote SIP devices, and resolve call quality issues by enabling \ the insertion of QoS rules.")) @@ -247,7 +247,7 @@ s:tab("qos", translate("QoS Settings"), QoS configuration page (Network->QoS) to configure other critical QoS settings like Download \ and Upload speed.")) -ringtime = s:taboption("general", Value, "ringtime", translate("Number of seconds to ring"), +ringtime = s:taboption("general", Value, "ringtime", translate("Number of Seconds to Ring"), translate("Set the number of seconds to ring users upon incoming calls before hanging up \ or going to voicemail, if the voicemail is installed and enabled.")) ringtime.default = 30 @@ -274,7 +274,7 @@ p.datatype = "port" p = s:taboption("remote_usage", Value, "rtpstart", translate("RTP Port Range Start"), translate("RTP traffic carries actual voice packets. This is the start of the port range \ - which will be used for setting up RTP communication. It's usually OK to leave this \ + that will be used for setting up RTP communication. It's usually OK to leave this \ at the default value.")) p.datatype = "port" p.default = defaultrtpstart diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua index af18c6ff00..8cede198c5 100644 --- a/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua +++ b/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua @@ -49,7 +49,7 @@ end m = Map (modulename, translate("Call Routing"), translate("This is where you indicate which Google/SIP accounts are used to call what \ - country/area codes, which users can use which SIP/Google accounts, how incoming \ + country/area codes, which users can use what SIP/Google accounts, how incoming \ calls are routed, what numbers can get into this PBX with a password, and what \ numbers are blacklisted.")) @@ -127,7 +127,7 @@ if nallvalidaccounts == 0 then elseif nvalidoutaccounts == 0 then text = translate("NOTE: There are no Google or SIP provider accounts enabled for outgoing calls.") else - text = translate("If you have more than one account which can make outgoing calls, you \ + text = translate("If you have more than one account that can make outgoing calls, you \ should enter a list of phone numbers and prefixes in the following fields for each \ provider listed. Invalid prefixes are removed silently, and only 0-9, X, Z, N, #, *, \ and + are valid characters. The letter X matches 0-9, Z matches 1-9, and N matches 2-9. \ @@ -155,7 +155,7 @@ for k,v in pairs(validoutaccounts) do value = self.map:get(section, self.option) if value == nil then - return {translate("Dials any number")} + return {translate("Used for numbers unmatched elsewhere")} else return value end @@ -184,9 +184,9 @@ if nallvalidaccounts == 0 then elseif nvalidinaccounts == 0 then text = translate("NOTE: There are no Google or SIP provider accounts enabled for incoming calls.") else - text = translate("For each provider that receives calls, here you can restrict which users to ring \ - on incoming calls. If the list is empty, the system will indicate that all users \ - which are enabled for incoming calls will ring. Invalid usernames will be rejected \ + text = translate("For each provider enabled for incoming calls, here you can restrict which users to\ + ring on incoming calls. If the list is empty, the system will indicate that all users \ + enabled for incoming calls will ring. Invalid usernames will be rejected \ silently. Also, entering a username here overrides the user's setting to not receive \ incoming calls. This way, you can make certain users ring only for specific providers. \ Entries can be made in a space-separated list, and/or one per line by hitting enter after \ @@ -236,13 +236,13 @@ if nallvalidusers == 0 then elseif nvalidoutusers == 0 then text = translate("NOTE: There are no local user accounts enabled for outgoing calls.") else - text = translate("If you would like, you could restrict which providers users are allowed to use for \ - outgoing calls. By default all users can use all providers. To show up in the list below the user \ - should be allowed to make outgoing calls in the \"User Accounts\" page. Enter VoIP providers in the \ - format username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest to copy and \ - paste the providers from above. Invalid entries, including providers not enabled for outgoing \ - calls, will be rejected silently. Entries can be made in a space-separated list, and/or one per \ - line by hitting enter after every one.") + text = translate("For each user enabled for outgoing calls you can restrict what providers the user \ + can use for outgoing calls. By default all users can use all providers. To show up in the list \ + below the user should be allowed to make outgoing calls in the \"User Accounts\" page. Enter VoIP \ + providers in the format username@some.host.name, as listed in \"Outgoing Calls\" above. It's \ + easiest to copy and paste the providers from above. Invalid entries, including providers not \ + enabled for outgoing calls, will be rejected silently. Entries can be made in a space-separated \ + list, and/or one per line by hitting enter after every one.") end @@ -288,7 +288,7 @@ end ---------------------------------------------------------------------------------------------------- s = m:section(TypedSection, "callthrough_numbers", translate("Call-through Numbers"), - translate("Designate numbers which will be allowed to call through this system and which user's \ + translate("Designate numbers that are allowed to call through this system and which user's \ privileges it will have.")) s.anonymous = true s.addremove = true @@ -335,10 +335,9 @@ end ---------------------------------------------------------------------------------------------------- s = m:section(NamedSection, "blacklisting", "call_routing", translate("Blacklisted Numbers"), - translate("Enter phone numbers that you want to decline calls from automatically. \ - You should probably omit the country code and any leading \ - zeroes, but please experiment to make sure you are blocking numbers from your \ - desired area successfully.")) + translate("Enter phone numbers that you want to decline calls from automatically. \ + You should probably omit the country code and any leading zeroes, but please \ + experiment to make sure you are blocking numbers from your desired area successfully.")) s.anonymous = true b = s:option(DynamicList, "blacklist1", translate("Dynamic List of Blacklisted Numbers"), diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-google.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-google.lua index 32b3442b6f..32e203e8c0 100644 --- a/applications/luci-pbx/luasrc/model/cbi/pbx-google.lua +++ b/applications/luci-pbx/luasrc/model/cbi/pbx-google.lua @@ -37,7 +37,7 @@ m = Map (modulename, translate("Google Accounts"), -- Recreate the config, and restart services after changes are commited to the configuration. function m.on_after_commit(self) - -- Create a field "name" for each account which identifies the account in the backend. + -- Create a field "name" for each account that identifies the account in the backend. commit = false m.uci:foreach(modulename, "gtalk_jabber", function(s1) @@ -85,7 +85,7 @@ end p = s:option(ListValue, "register", - translate("Enable Incoming Calls (See Status, Message below)"), + translate("Enable Incoming Calls (set Status below)"), translate("When somebody starts voice chat with your GTalk account or calls the GVoice, \ number (if you have Google Voice), the call will be forwarded to any users \ that are online (registered using a SIP device or softphone) and permitted to \ @@ -105,14 +105,14 @@ p:value("yes", translate("Yes")) p:value("no", translate("No")) p.default = "yes" -st = s:option(ListValue, "status", translate("Account Status")) +st = s:option(ListValue, "status", translate("Google Talk Status")) st:depends("register", "yes") st:value("dnd", translate("Do Not Disturb")) st:value("away", translate("Away")) st:value("available", translate("Available")) st.default = defaultstatus -stm = s:option(Value, "statusmessage", translate("Account Status Message"), +stm = s:option(Value, "statusmessage", translate("Google Talk Status Message"), translate("Avoid using anything but alpha-numeric characters, space, comma, and period.")) stm:depends("register", "yes") stm.default = defaultstatusmessage diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-users.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-users.lua index c388967a65..c7c8b4d8bb 100644 --- a/applications/luci-pbx/luasrc/model/cbi/pbx-users.lua +++ b/applications/luci-pbx/luasrc/model/cbi/pbx-users.lua @@ -31,10 +31,10 @@ modulenameadvanced = "pbx-advanced" m = Map (modulename, translate("User Accounts"), - translate("Here you must configure at least one SIP account, which you \ - will use to register with this service. Use this account either in an analog telephony \ - adapter (ATA), or in a SIP softphone like CSipSimple, Linphone, or Sipdroid on your \ - Android smartphone, or X-lite or Ekiga on your computer. By default, all SIP accounts \ + translate("Here you must configure at least one SIP account, that you \ + will use to register with this service. Use this account either in an Analog Telephony \ + Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid on your \ + smartphone, or Ekiga, Linphone, or X-Lite on your computer. By default, all SIP accounts \ will ring simultaneously if a call is made to one of your VoIP provider accounts or GV \ numbers.")) @@ -79,11 +79,11 @@ end if bindport ~= nil then s:option(DummyValue, "bindport", translate("Port Setting for SIP Devices"), translatef("If setting Server/Registrar to %s or %s does not work for you, try setting \ - it to %s or %s and entering this port number in a separate field which specifies the \ + it to %s or %s and entering this port number in a separate field that specifies the \ Server/Registrar port number. Beware that some devices have a confusing \ - setting which sets the port where SIP requests originate from on the SIP \ - device itself (bind port). The port specified on this page is NOT this bind port \ - but the this service listens on.", + setting that sets the port where SIP requests originate from on the SIP \ + device itself (the bind port). The port specified on this page is NOT this bind port \ + but the port this service listens on.", ipaddr, externhost, just_ipaddr, just_externhost)).default = bindport end diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-voip.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-voip.lua index 41395ae86a..ed1ed1edb1 100644 --- a/applications/luci-pbx/luasrc/model/cbi/pbx-voip.lua +++ b/applications/luci-pbx/luasrc/model/cbi/pbx-voip.lua @@ -36,7 +36,7 @@ m = Map (modulename, translate("SIP Accounts"), -- Recreate the config, and restart services after changes are commited to the configuration. function m.on_after_commit(self) commit = false - -- Create a field "name" for each account which identifies the account in the backend. + -- Create a field "name" for each account that identifies the account in the backend. m.uci:foreach(modulename, "voip_provider", function(s1) if s1.defaultuser ~= nil and s1.host ~= nil then