commands-dms.h

   1 #define __uqmi_dms_commands                                                                                             \
   2         __uqmi_command(dms_get_pin_status, get-pin-status, no, QMI_SERVICE_DMS), \
   3         __uqmi_command(dms_verify_pin1, verify-pin1, required, QMI_SERVICE_DMS), \
   4         __uqmi_command(dms_verify_pin2, verify-pin2, required, QMI_SERVICE_DMS), \
   5         __uqmi_command(dms_unblock_pin1, unblock-pin1, no, QMI_SERVICE_DMS), \
   6         __uqmi_command(dms_unblock_pin2, unblock-pin2, no, QMI_SERVICE_DMS), \
   7         __uqmi_command(dms_set_puk, puk, required, CMD_TYPE_OPTION), \
   8         __uqmi_command(dms_set_new_pin, new-pin, required, CMD_TYPE_OPTION), \
   9         __uqmi_command(dms_get_iccid, get-iccid, no, QMI_SERVICE_DMS), \
  10         __uqmi_command(dms_get_imsi, get-imsi, no, QMI_SERVICE_DMS), \
  11         __uqmi_command(dms_set_operating_mode, set-device-operating-mode, required, QMI_SERVICE_DMS), \
  12         __uqmi_command(dms_reset, reset-dms, no, QMI_SERVICE_DMS) \
  13
  14 #define dms_helptext \
  15                 "  --get-pin-status:                 Get PIN verification status\n" \
  16                 "  --verify-pin1 <pin>:              Verify PIN1\n" \
  17                 "  --verify-pin2 <pin>:              Verify PIN2\n" \
  18                 "  --unblock-pin1:                   Unblock PIN1\n" \
  19                 "    --puk <puk>:                    PUK needed to unblock\n" \
  20                 "    --new-pin <new pin>:            New pin\n" \
  21                 "  --unblock-pin2:                   Unblock PIN2\n" \
  22                 "    --puk <puk>:                    PUK needed to unblock\n" \
  23                 "    --new-pin <new pin>:            New pin\n" \
  24                 "  --get-iccid:                      Get the ICCID\n" \
  25                 "  --get-imsi:                       Get International Mobile Subscriber ID\n" \
  26                 "  --reset-dms:                      Reset the DMS service\n" \
  27                 "  --set-device-operating-mode <m>   Set the device operating mode\n" \
  28                 "                                    (modes: online, low_power, factory_test, offline\n" \
  29                 "                                     reset, shutting_down, persistent_low_power,\n" \
  30                 "                                     mode_only_low_power)\n" \
  31