diff options
| author | Rafal Boni | 2024-10-24 07:06:22 +0000 |
|---|---|---|
| committer | Robert Marko | 2024-10-30 14:51:18 +0000 |
| commit | b5e1544f4d45795ab8750b1054c54c8880b7b96b (patch) | |
| tree | 5b3e392b20bdc48d2b7636293c246eef99a7ca77 | |
| parent | 73edd3a41e3fb0bbb0c255554fd5c0b99d701e24 (diff) | |
| download | openwrt-b5e1544f4d45795ab8750b1054c54c8880b7b96b.tar.gz | |
ipq806x: Revert "ipq806x: swap lan leds for Meraki MR52"
This reverts commit ec8f647d168fa8f3b1eedd9b5fe665f793f3a659, as with the
current kernel version, the change actually causes the same bug it once
may have fixed -- that is, the leds are now again reversed.
I suspect this was due to a switch to a newer kernel version between when
the patch was submitted and now reversing the order of the interfaces, so
that eth0 / the LAN interface is also the interface used for PoE, and eth1
/ the WAN interface is the non-PoE interface.
Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16779
Signed-off-by: Robert Marko <robimarko@gmail.com>
| -rw-r--r-- | target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts index 0d3230e6de..97b280e201 100644 --- a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts +++ b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts @@ -48,12 +48,12 @@ lan1_green { label = "green:lan1"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; }; lan2_green { label = "green:lan2"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; }; led_active: active { @@ -63,12 +63,12 @@ lan1_orange { label = "orange:lan1"; - gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>; + gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>; }; lan2_orange { label = "orange:lan2"; - gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>; + gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>; }; }; }; |