Use the latest version sent upsteram.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
# CONFIG_B53_MMAP_DRIVER is not set
# CONFIG_B53_SERDES is not set
# CONFIG_B53_SRAB_DRIVER is not set
-CONFIG_BCM4908ENET=y
+CONFIG_BCM4908_ENET=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_PMB=y
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 5 Feb 2021 21:57:41 +0100
Subject: [PATCH 1/2] dt-bindings: net: document BCM4908 Ethernet controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
BCM4908 is a family of SoCs with integrated Ethernet controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
- .../bindings/net/brcm,bcm4908enet.yaml | 45 +++++++++++++++++++
- 1 file changed, 45 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
+ .../bindings/net/brcm,bcm4908-enet.yaml | 43 +++++++++++++++++++
+ 1 file changed, 43 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
--- /dev/null
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-@@ -0,0 +1,45 @@
++++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
+@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
-+$id: http://devicetree.org/schemas/net/brcm,bcm4908enet.yaml#
++$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 Ethernet controller
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
++allOf:
++ - $ref: ethernet-controller.yaml#
++
+properties:
+ compatible:
-+ const: brcm,bcm4908enet
++ const: brcm,bcm4908-enet
+
+ reg:
+ maxItems: 1
+ interrupts:
+ description: RX interrupt
+
-+ interrupt-names:
-+ const: rx
-+
+required:
+ - reg
+ - interrupts
-+ - interrupt-names
+
+additionalProperties: false
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ethernet@80002000 {
-+ compatible = "brcm,bcm4908enet";
++ compatible = "brcm,bcm4908-enet";
+ reg = <0x80002000 0x1000>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "rx";
+ };
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 5 Feb 2021 21:59:51 +0100
+Subject: [PATCH 2/2] net: broadcom: bcm4908_enet: add BCM4908 controller
+ driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM4908 SoCs family has integrated Ethernel controller that includes
+UniMAC but uses different DMA engine (than other controllers) and
+requires different programming.
+
+Ethernet controller in BCM4908 is always connected to the internal SF2
+switch's port and uses fixed link.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ MAINTAINERS | 9 +
+ drivers/net/ethernet/broadcom/Kconfig | 8 +
+ drivers/net/ethernet/broadcom/Makefile | 1 +
+ drivers/net/ethernet/broadcom/bcm4908_enet.c | 671 +++++++++++++++++++
+ drivers/net/ethernet/broadcom/bcm4908_enet.h | 96 +++
+ 5 files changed, 785 insertions(+)
+ create mode 100644 drivers/net/ethernet/broadcom/bcm4908_enet.c
+ create mode 100644 drivers/net/ethernet/broadcom/bcm4908_enet.h
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -3207,6 +3207,15 @@ F: Documentation/devicetree/bindings/mip
+ F: arch/mips/bcm47xx/*
+ F: arch/mips/include/asm/mach-bcm47xx/*
+
++BROADCOM BCM4908 ETHERNET DRIVER
++M: Rafał Miłecki <rafal@milecki.pl>
++M: bcm-kernel-feedback-list@broadcom.com
++L: netdev@vger.kernel.org
++S: Maintained
++F: Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
++F: drivers/net/ethernet/broadcom/bcm4908_enet.*
++F: drivers/net/ethernet/broadcom/unimac.h
++
+ BROADCOM BCM5301X ARM ARCHITECTURE
+ M: Hauke Mehrtens <hauke@hauke-m.de>
+ M: Rafał Miłecki <zajec5@gmail.com>
+--- a/drivers/net/ethernet/broadcom/Kconfig
++++ b/drivers/net/ethernet/broadcom/Kconfig
+@@ -51,6 +51,14 @@ config B44_PCI
+ depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
+ default y
+
++config BCM4908_ENET
++ tristate "Broadcom BCM4908 internal mac support"
++ depends on ARCH_BCM4908 || COMPILE_TEST
++ default ARCH_BCM4908
++ help
++ This driver supports Ethernet controller integrated into Broadcom
++ BCM4908 family SoCs.
++
+ config BCM63XX_ENET
+ tristate "Broadcom 63xx internal mac support"
+ depends on BCM63XX
+--- a/drivers/net/ethernet/broadcom/Makefile
++++ b/drivers/net/ethernet/broadcom/Makefile
+@@ -4,6 +4,7 @@
+ #
+
+ obj-$(CONFIG_B44) += b44.o
++obj-$(CONFIG_BCM4908_ENET) += bcm4908_enet.o
+ obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+ obj-$(CONFIG_BCMGENET) += genet/
+ obj-$(CONFIG_BNX2) += bnx2.o
+--- /dev/null
++++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
+@@ -0,0 +1,671 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
++ */
++
++#include <linux/delay.h>
++#include <linux/etherdevice.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++
++#include "bcm4908_enet.h"
++#include "unimac.h"
++
++#define ENET_DMA_CH_RX_CFG ENET_DMA_CH0_CFG
++#define ENET_DMA_CH_TX_CFG ENET_DMA_CH1_CFG
++#define ENET_DMA_CH_RX_STATE_RAM ENET_DMA_CH0_STATE_RAM
++#define ENET_DMA_CH_TX_STATE_RAM ENET_DMA_CH1_STATE_RAM
++
++#define ENET_TX_BDS_NUM 200
++#define ENET_RX_BDS_NUM 200
++#define ENET_RX_BDS_NUM_MAX 8192
++
++#define ENET_DMA_INT_DEFAULTS (ENET_DMA_CH_CFG_INT_DONE | \
++ ENET_DMA_CH_CFG_INT_NO_DESC | \
++ ENET_DMA_CH_CFG_INT_BUFF_DONE)
++#define ENET_DMA_MAX_BURST_LEN 8 /* in 64 bit words */
++
++#define ENET_MTU_MIN 60
++#define ENET_MTU_MAX 1500 /* Is it possible to support 2044? */
++#define ENET_MTU_MAX_EXTRA_SIZE 32 /* L2 */
++
++struct bcm4908_enet_dma_ring_bd {
++ __le32 ctl;
++ __le32 addr;
++} __packed;
++
++struct bcm4908_enet_dma_ring_slot {
++ struct sk_buff *skb;
++ unsigned int len;
++ dma_addr_t dma_addr;
++};
++
++struct bcm4908_enet_dma_ring {
++ int is_tx;
++ int read_idx;
++ int write_idx;
++ int length;
++ u16 cfg_block;
++ u16 st_ram_block;
++
++ union {
++ void *cpu_addr;
++ struct bcm4908_enet_dma_ring_bd *buf_desc;
++ };
++ dma_addr_t dma_addr;
++
++ struct bcm4908_enet_dma_ring_slot *slots;
++};
++
++struct bcm4908_enet {
++ struct device *dev;
++ struct net_device *netdev;
++ struct napi_struct napi;
++ void __iomem *base;
++
++ struct bcm4908_enet_dma_ring tx_ring;
++ struct bcm4908_enet_dma_ring rx_ring;
++};
++
++/***
++ * R/W ops
++ */
++
++static u32 enet_read(struct bcm4908_enet *enet, u16 offset)
++{
++ return readl(enet->base + offset);
++}
++
++static void enet_write(struct bcm4908_enet *enet, u16 offset, u32 value)
++{
++ writel(value, enet->base + offset);
++}
++
++static void enet_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
++{
++ u32 val;
++
++ WARN_ON(set & ~mask);
++
++ val = enet_read(enet, offset);
++ val = (val & ~mask) | (set & mask);
++ enet_write(enet, offset, val);
++}
++
++static void enet_set(struct bcm4908_enet *enet, u16 offset, u32 set)
++{
++ enet_maskset(enet, offset, set, set);
++}
++
++static u32 enet_umac_read(struct bcm4908_enet *enet, u16 offset)
++{
++ return enet_read(enet, ENET_UNIMAC + offset);
++}
++
++static void enet_umac_write(struct bcm4908_enet *enet, u16 offset, u32 value)
++{
++ enet_write(enet, ENET_UNIMAC + offset, value);
++}
++
++static void enet_umac_set(struct bcm4908_enet *enet, u16 offset, u32 set)
++{
++ enet_set(enet, ENET_UNIMAC + offset, set);
++}
++
++/***
++ * Helpers
++ */
++
++static void bcm4908_enet_intrs_on(struct bcm4908_enet *enet)
++{
++ enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
++}
++
++static void bcm4908_enet_intrs_off(struct bcm4908_enet *enet)
++{
++ enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
++}
++
++static void bcm4908_enet_intrs_ack(struct bcm4908_enet *enet)
++{
++ enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
++}
++
++/***
++ * DMA
++ */
++
++static int bcm4908_dma_alloc_buf_descs(struct bcm4908_enet *enet,
++ struct bcm4908_enet_dma_ring *ring)
++{
++ int size = ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
++ struct device *dev = enet->dev;
++
++ ring->cpu_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, GFP_KERNEL);
++ if (!ring->cpu_addr)
++ return -ENOMEM;
++
++ if (((uintptr_t)ring->cpu_addr) & (0x40 - 1)) {
++ dev_err(dev, "Invalid DMA ring alignment\n");
++ goto err_free_buf_descs;
++ }
++
++ ring->slots = kzalloc(ring->length * sizeof(*ring->slots), GFP_KERNEL);
++ if (!ring->slots)
++ goto err_free_buf_descs;
++
++ ring->read_idx = 0;
++ ring->write_idx = 0;
++
++ return 0;
++
++err_free_buf_descs:
++ dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr);
++ return -ENOMEM;
++}
++
++static void bcm4908_enet_dma_free(struct bcm4908_enet *enet)
++{
++ struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
++ struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
++ struct device *dev = enet->dev;
++ int size;
++
++ size = rx_ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
++ if (rx_ring->cpu_addr)
++ dma_free_coherent(dev, size, rx_ring->cpu_addr, rx_ring->dma_addr);
++ kfree(rx_ring->slots);
++
++ size = tx_ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
++ if (tx_ring->cpu_addr)
++ dma_free_coherent(dev, size, tx_ring->cpu_addr, tx_ring->dma_addr);
++ kfree(tx_ring->slots);
++}
++
++static int bcm4908_enet_dma_alloc(struct bcm4908_enet *enet)
++{
++ struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
++ struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
++ struct device *dev = enet->dev;
++ int err;
++
++ tx_ring->length = ENET_TX_BDS_NUM;
++ tx_ring->is_tx = 1;
++ tx_ring->cfg_block = ENET_DMA_CH_TX_CFG;
++ tx_ring->st_ram_block = ENET_DMA_CH_TX_STATE_RAM;
++ err = bcm4908_dma_alloc_buf_descs(enet, tx_ring);
++ if (err) {
++ dev_err(dev, "Failed to alloc TX buf descriptors: %d\n", err);
++ return err;
++ }
++
++ rx_ring->length = ENET_RX_BDS_NUM;
++ rx_ring->is_tx = 0;
++ rx_ring->cfg_block = ENET_DMA_CH_RX_CFG;
++ rx_ring->st_ram_block = ENET_DMA_CH_RX_STATE_RAM;
++ err = bcm4908_dma_alloc_buf_descs(enet, rx_ring);
++ if (err) {
++ dev_err(dev, "Failed to alloc RX buf descriptors: %d\n", err);
++ bcm4908_enet_dma_free(enet);
++ return err;
++ }
++
++ return 0;
++}
++
++static void bcm4908_enet_dma_reset(struct bcm4908_enet *enet)
++{
++ struct bcm4908_enet_dma_ring *rings[] = { &enet->rx_ring, &enet->tx_ring };
++ int i;
++
++ /* Disable the DMA controller and channel */
++ for (i = 0; i < ARRAY_SIZE(rings); i++)
++ enet_write(enet, rings[i]->cfg_block + ENET_DMA_CH_CFG, 0);
++ enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN, 0);
++
++ /* Reset channels state */
++ for (i = 0; i < ARRAY_SIZE(rings); i++) {
++ struct bcm4908_enet_dma_ring *ring = rings[i];
++
++ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR, 0);
++ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_STATE_DATA, 0);
++ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS, 0);
++ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR, 0);
++ }
++}
++
++static int bcm4908_enet_dma_alloc_rx_buf(struct bcm4908_enet *enet, unsigned int idx)
++{
++ struct bcm4908_enet_dma_ring_bd *buf_desc = &enet->rx_ring.buf_desc[idx];
++ struct bcm4908_enet_dma_ring_slot *slot = &enet->rx_ring.slots[idx];
++ struct device *dev = enet->dev;
++ u32 tmp;
++ int err;
++
++ slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
++
++ slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
++ if (!slot->skb)
++ return -ENOMEM;
++
++ slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
++ err = dma_mapping_error(dev, slot->dma_addr);
++ if (err) {
++ dev_err(dev, "Failed to map DMA buffer: %d\n", err);
++ kfree_skb(slot->skb);
++ slot->skb = NULL;
++ return err;
++ }
++
++ tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
++ tmp |= DMA_CTL_STATUS_OWN;
++ if (idx == enet->rx_ring.length - 1)
++ tmp |= DMA_CTL_STATUS_WRAP;
++ buf_desc->ctl = cpu_to_le32(tmp);
++ buf_desc->addr = cpu_to_le32(slot->dma_addr);
++
++ return 0;
++}
++
++static void bcm4908_enet_dma_ring_init(struct bcm4908_enet *enet,
++ struct bcm4908_enet_dma_ring *ring)
++{
++ int reset_channel = 0; /* We support only 1 main channel (with TX and RX) */
++ int reset_subch = ring->is_tx ? 1 : 0;
++
++ /* Reset the DMA channel */
++ enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, BIT(reset_channel * 2 + reset_subch));
++ enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, 0);
++
++ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
++ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_MAX_BURST, ENET_DMA_MAX_BURST_LEN);
++ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
++
++ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
++ (uint32_t)ring->dma_addr);
++}
++
++static void bcm4908_enet_dma_uninit(struct bcm4908_enet *enet)
++{
++ struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
++ struct bcm4908_enet_dma_ring_slot *slot;
++ struct device *dev = enet->dev;
++ int i;
++
++ for (i = rx_ring->length - 1; i >= 0; i--) {
++ slot = &rx_ring->slots[i];
++ if (!slot->skb)
++ continue;
++ dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
++ kfree_skb(slot->skb);
++ slot->skb = NULL;
++ }
++}
++
++static int bcm4908_enet_dma_init(struct bcm4908_enet *enet)
++{
++ struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
++ struct device *dev = enet->dev;
++ int err;
++ int i;
++
++ for (i = 0; i < rx_ring->length; i++) {
++ err = bcm4908_enet_dma_alloc_rx_buf(enet, i);
++ if (err) {
++ dev_err(dev, "Failed to alloc RX buffer: %d\n", err);
++ bcm4908_enet_dma_uninit(enet);
++ return err;
++ }
++ }
++
++ bcm4908_enet_dma_ring_init(enet, &enet->tx_ring);
++ bcm4908_enet_dma_ring_init(enet, &enet->rx_ring);
++
++ return 0;
++}
++
++static void bcm4908_enet_dma_tx_ring_enable(struct bcm4908_enet *enet,
++ struct bcm4908_enet_dma_ring *ring)
++{
++ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
++}
++
++static void bcm4908_enet_dma_tx_ring_disable(struct bcm4908_enet *enet,
++ struct bcm4908_enet_dma_ring *ring)
++{
++ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
++}
++
++static void bcm4908_enet_dma_rx_ring_enable(struct bcm4908_enet *enet,
++ struct bcm4908_enet_dma_ring *ring)
++{
++ enet_set(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
++}
++
++static void bcm4908_enet_dma_rx_ring_disable(struct bcm4908_enet *enet,
++ struct bcm4908_enet_dma_ring *ring)
++{
++ unsigned long deadline;
++ u32 tmp;
++
++ enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
++
++ deadline = jiffies + usecs_to_jiffies(2000);
++ do {
++ tmp = enet_read(enet, ring->cfg_block + ENET_DMA_CH_CFG);
++ if (!(tmp & ENET_DMA_CH_CFG_ENABLE))
++ return;
++ enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
++ usleep_range(10, 30);
++ } while (!time_after_eq(jiffies, deadline));
++
++ dev_warn(enet->dev, "Timeout waiting for DMA TX stop\n");
++}
++
++/***
++ * Ethernet driver
++ */
++
++static void bcm4908_enet_gmac_init(struct bcm4908_enet *enet)
++{
++ u32 cmd;
++
++ cmd = enet_umac_read(enet, UMAC_CMD);
++ enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
++ enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
++
++ enet_set(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH);
++ enet_maskset(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH, 0);
++
++ enet_set(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB);
++ enet_maskset(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB, 0);
++
++ cmd = enet_umac_read(enet, UMAC_CMD);
++ cmd &= ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT);
++ cmd &= ~CMD_TX_EN;
++ cmd &= ~CMD_RX_EN;
++ cmd |= CMD_SPEED_1000 << CMD_SPEED_SHIFT;
++ enet_umac_write(enet, UMAC_CMD, cmd);
++
++ enet_maskset(enet, ENET_GMAC_STATUS,
++ ENET_GMAC_STATUS_ETH_SPEED_MASK |
++ ENET_GMAC_STATUS_HD |
++ ENET_GMAC_STATUS_AUTO_CFG_EN |
++ ENET_GMAC_STATUS_LINK_UP,
++ ENET_GMAC_STATUS_ETH_SPEED_1000 |
++ ENET_GMAC_STATUS_AUTO_CFG_EN |
++ ENET_GMAC_STATUS_LINK_UP);
++}
++
++static irqreturn_t bcm4908_enet_irq_handler(int irq, void *dev_id)
++{
++ struct bcm4908_enet *enet = dev_id;
++
++ bcm4908_enet_intrs_off(enet);
++ bcm4908_enet_intrs_ack(enet);
++
++ napi_schedule(&enet->napi);
++
++ return IRQ_HANDLED;
++}
++
++static int bcm4908_enet_open(struct net_device *netdev)
++{
++ struct bcm4908_enet *enet = netdev_priv(netdev);
++ struct device *dev = enet->dev;
++ int err;
++
++ err = request_irq(netdev->irq, bcm4908_enet_irq_handler, 0, "enet", enet);
++ if (err) {
++ dev_err(dev, "Failed to request IRQ %d: %d\n", netdev->irq, err);
++ return err;
++ }
++
++ bcm4908_enet_gmac_init(enet);
++ bcm4908_enet_dma_reset(enet);
++ bcm4908_enet_dma_init(enet);
++
++ enet_umac_set(enet, UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
++
++ enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
++ enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
++ bcm4908_enet_dma_rx_ring_enable(enet, &enet->rx_ring);
++
++ napi_enable(&enet->napi);
++ netif_carrier_on(netdev);
++ netif_start_queue(netdev);
++
++ bcm4908_enet_intrs_ack(enet);
++ bcm4908_enet_intrs_on(enet);
++
++ return 0;
++}
++
++static int bcm4908_enet_stop(struct net_device *netdev)
++{
++ struct bcm4908_enet *enet = netdev_priv(netdev);
++
++ netif_stop_queue(netdev);
++ netif_carrier_off(netdev);
++ napi_disable(&enet->napi);
++
++ bcm4908_enet_dma_rx_ring_disable(enet, &enet->rx_ring);
++ bcm4908_enet_dma_tx_ring_disable(enet, &enet->tx_ring);
++
++ bcm4908_enet_dma_uninit(enet);
++
++ free_irq(enet->netdev->irq, enet);
++
++ return 0;
++}
++
++static int bcm4908_enet_start_xmit(struct sk_buff *skb, struct net_device *netdev)
++{
++ struct bcm4908_enet *enet = netdev_priv(netdev);
++ struct bcm4908_enet_dma_ring *ring = &enet->tx_ring;
++ struct bcm4908_enet_dma_ring_slot *slot;
++ struct device *dev = enet->dev;
++ struct bcm4908_enet_dma_ring_bd *buf_desc;
++ int free_buf_descs;
++ u32 tmp;
++
++ /* Free transmitted skbs */
++ while (ring->read_idx != ring->write_idx) {
++ buf_desc = &ring->buf_desc[ring->read_idx];
++ if (le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)
++ break;
++ slot = &ring->slots[ring->read_idx];
++
++ dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
++ dev_kfree_skb(slot->skb);
++ if (++ring->read_idx == ring->length)
++ ring->read_idx = 0;
++ }
++
++ /* Don't use the last empty buf descriptor */
++ if (ring->read_idx <= ring->write_idx)
++ free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
++ else
++ free_buf_descs = ring->read_idx - ring->write_idx;
++ if (free_buf_descs < 2)
++ return NETDEV_TX_BUSY;
++
++ /* Hardware removes OWN bit after sending data */
++ buf_desc = &ring->buf_desc[ring->write_idx];
++ if (unlikely(le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)) {
++ netif_stop_queue(netdev);
++ return NETDEV_TX_BUSY;
++ }
++
++ slot = &ring->slots[ring->write_idx];
++ slot->skb = skb;
++ slot->len = skb->len;
++ slot->dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
++ if (unlikely(dma_mapping_error(dev, slot->dma_addr)))
++ return NETDEV_TX_BUSY;
++
++ tmp = skb->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
++ tmp |= DMA_CTL_STATUS_OWN;
++ tmp |= DMA_CTL_STATUS_SOP;
++ tmp |= DMA_CTL_STATUS_EOP;
++ tmp |= DMA_CTL_STATUS_APPEND_CRC;
++ if (ring->write_idx + 1 == ring->length - 1)
++ tmp |= DMA_CTL_STATUS_WRAP;
++
++ buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
++ buf_desc->ctl = cpu_to_le32(tmp);
++
++ bcm4908_enet_dma_tx_ring_enable(enet, &enet->tx_ring);
++
++ if (++ring->write_idx == ring->length - 1)
++ ring->write_idx = 0;
++ enet->netdev->stats.tx_bytes += skb->len;
++ enet->netdev->stats.tx_packets++;
++
++ return NETDEV_TX_OK;
++}
++
++static int bcm4908_enet_poll(struct napi_struct *napi, int weight)
++{
++ struct bcm4908_enet *enet = container_of(napi, struct bcm4908_enet, napi);
++ struct device *dev = enet->dev;
++ int handled = 0;
++
++ while (handled < weight) {
++ struct bcm4908_enet_dma_ring_bd *buf_desc;
++ struct bcm4908_enet_dma_ring_slot slot;
++ u32 ctl;
++ int len;
++ int err;
++
++ buf_desc = &enet->rx_ring.buf_desc[enet->rx_ring.read_idx];
++ ctl = le32_to_cpu(buf_desc->ctl);
++ if (ctl & DMA_CTL_STATUS_OWN)
++ break;
++
++ slot = enet->rx_ring.slots[enet->rx_ring.read_idx];
++
++ /* Provide new buffer before unpinning the old one */
++ err = bcm4908_enet_dma_alloc_rx_buf(enet, enet->rx_ring.read_idx);
++ if (err)
++ break;
++
++ if (++enet->rx_ring.read_idx == enet->rx_ring.length)
++ enet->rx_ring.read_idx = 0;
++
++ len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
++
++ if (len < ENET_MTU_MIN ||
++ (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
++ kfree(slot.skb);
++ enet->netdev->stats.rx_dropped++;
++ break;
++ }
++
++ dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
++
++ skb_put(slot.skb, len - ETH_FCS_LEN);
++ slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
++ netif_receive_skb(slot.skb);
++
++ enet->netdev->stats.rx_packets++;
++ enet->netdev->stats.rx_bytes += len;
++ }
++
++ if (handled < weight) {
++ napi_complete_done(napi, handled);
++ bcm4908_enet_intrs_on(enet);
++ }
++
++ return handled;
++}
++
++static const struct net_device_ops bcm4908_enet_netdev_ops = {
++ .ndo_open = bcm4908_enet_open,
++ .ndo_stop = bcm4908_enet_stop,
++ .ndo_start_xmit = bcm4908_enet_start_xmit,
++ .ndo_set_mac_address = eth_mac_addr,
++};
++
++static int bcm4908_enet_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct net_device *netdev;
++ struct bcm4908_enet *enet;
++ int err;
++
++ netdev = devm_alloc_etherdev(dev, sizeof(*enet));
++ if (!netdev)
++ return -ENOMEM;
++
++ enet = netdev_priv(netdev);
++ enet->dev = dev;
++ enet->netdev = netdev;
++
++ enet->base = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(enet->base)) {
++ dev_err(dev, "Failed to map registers: %ld\n", PTR_ERR(enet->base));
++ return PTR_ERR(enet->base);
++ }
++
++ netdev->irq = platform_get_irq(pdev, 0);
++ if (netdev->irq < 0)
++ return netdev->irq;
++
++ dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
++
++ err = bcm4908_enet_dma_alloc(enet);
++ if (err)
++ return err;
++
++ SET_NETDEV_DEV(netdev, &pdev->dev);
++ eth_hw_addr_random(netdev);
++ netdev->netdev_ops = &bcm4908_enet_netdev_ops;
++ netdev->min_mtu = ETH_ZLEN;
++ netdev->mtu = ENET_MTU_MAX;
++ netdev->max_mtu = ENET_MTU_MAX;
++ netif_napi_add(netdev, &enet->napi, bcm4908_enet_poll, 64);
++
++ err = register_netdev(netdev);
++ if (err) {
++ bcm4908_enet_dma_free(enet);
++ return err;
++ }
++
++ platform_set_drvdata(pdev, enet);
++
++ return 0;
++}
++
++static int bcm4908_enet_remove(struct platform_device *pdev)
++{
++ struct bcm4908_enet *enet = platform_get_drvdata(pdev);
++
++ unregister_netdev(enet->netdev);
++ netif_napi_del(&enet->napi);
++ bcm4908_enet_dma_free(enet);
++
++ return 0;
++}
++
++static const struct of_device_id bcm4908_enet_of_match[] = {
++ { .compatible = "brcm,bcm4908-enet"},
++ {},
++};
++
++static struct platform_driver bcm4908_enet_driver = {
++ .driver = {
++ .name = "bcm4908_enet",
++ .of_match_table = bcm4908_enet_of_match,
++ },
++ .probe = bcm4908_enet_probe,
++ .remove = bcm4908_enet_remove,
++};
++module_platform_driver(bcm4908_enet_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DEVICE_TABLE(of, bcm4908_enet_of_match);
+--- /dev/null
++++ b/drivers/net/ethernet/broadcom/bcm4908_enet.h
+@@ -0,0 +1,96 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++#ifndef __BCM4908_ENET_H
++#define __BCM4908_ENET_H
++
++#define ENET_CONTROL 0x000
++#define ENET_MIB_CTRL 0x004
++#define ENET_MIB_CTRL_CLR_MIB 0x00000001
++#define ENET_RX_ERR_MASK 0x008
++#define ENET_MIB_MAX_PKT_SIZE 0x00C
++#define ENET_MIB_MAX_PKT_SIZE_VAL 0x00003fff
++#define ENET_DIAG_OUT 0x01c
++#define ENET_ENABLE_DROP_PKT 0x020
++#define ENET_IRQ_ENABLE 0x024
++#define ENET_IRQ_ENABLE_OVFL 0x00000001
++#define ENET_GMAC_STATUS 0x028
++#define ENET_GMAC_STATUS_ETH_SPEED_MASK 0x00000003
++#define ENET_GMAC_STATUS_ETH_SPEED_10 0x00000000
++#define ENET_GMAC_STATUS_ETH_SPEED_100 0x00000001
++#define ENET_GMAC_STATUS_ETH_SPEED_1000 0x00000002
++#define ENET_GMAC_STATUS_HD 0x00000004
++#define ENET_GMAC_STATUS_AUTO_CFG_EN 0x00000008
++#define ENET_GMAC_STATUS_LINK_UP 0x00000010
++#define ENET_IRQ_STATUS 0x02c
++#define ENET_IRQ_STATUS_OVFL 0x00000001
++#define ENET_OVERFLOW_COUNTER 0x030
++#define ENET_FLUSH 0x034
++#define ENET_FLUSH_RXFIFO_FLUSH 0x00000001
++#define ENET_FLUSH_TXFIFO_FLUSH 0x00000002
++#define ENET_RSV_SELECT 0x038
++#define ENET_BP_FORCE 0x03c
++#define ENET_BP_FORCE_FORCE 0x00000001
++#define ENET_DMA_RX_OK_TO_SEND_COUNT 0x040
++#define ENET_DMA_RX_OK_TO_SEND_COUNT_VAL 0x0000000f
++#define ENET_TX_CRC_CTRL 0x044
++#define ENET_MIB 0x200
++#define ENET_UNIMAC 0x400
++#define ENET_DMA 0x800
++#define ENET_DMA_CONTROLLER_CFG 0x800
++#define ENET_DMA_CTRL_CFG_MASTER_EN 0x00000001
++#define ENET_DMA_CTRL_CFG_FLOWC_CH1_EN 0x00000002
++#define ENET_DMA_CTRL_CFG_FLOWC_CH3_EN 0x00000004
++#define ENET_DMA_FLOWCTL_CH1_THRESH_LO 0x804
++#define ENET_DMA_FLOWCTL_CH1_THRESH_HI 0x808
++#define ENET_DMA_FLOWCTL_CH1_ALLOC 0x80c
++#define ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE 0x80000000
++#define ENET_DMA_FLOWCTL_CH3_THRESH_LO 0x810
++#define ENET_DMA_FLOWCTL_CH3_THRESH_HI 0x814
++#define ENET_DMA_FLOWCTL_CH3_ALLOC 0x818
++#define ENET_DMA_FLOWCTL_CH5_THRESH_LO 0x81C
++#define ENET_DMA_FLOWCTL_CH5_THRESH_HI 0x820
++#define ENET_DMA_FLOWCTL_CH5_ALLOC 0x824
++#define ENET_DMA_FLOWCTL_CH7_THRESH_LO 0x828
++#define ENET_DMA_FLOWCTL_CH7_THRESH_HI 0x82C
++#define ENET_DMA_FLOWCTL_CH7_ALLOC 0x830
++#define ENET_DMA_CTRL_CHANNEL_RESET 0x834
++#define ENET_DMA_CTRL_CHANNEL_DEBUG 0x838
++#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS 0x840
++#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK 0x844
++#define ENET_DMA_CH0_CFG 0xa00 /* RX */
++#define ENET_DMA_CH1_CFG 0xa10 /* TX */
++#define ENET_DMA_CH0_STATE_RAM 0xc00 /* RX */
++#define ENET_DMA_CH1_STATE_RAM 0xc10 /* TX */
++
++#define ENET_DMA_CH_CFG 0x00 /* assorted configuration */
++#define ENET_DMA_CH_CFG_ENABLE 0x00000001 /* set to enable channel */
++#define ENET_DMA_CH_CFG_PKT_HALT 0x00000002 /* idle after an EOP flag is detected */
++#define ENET_DMA_CH_CFG_BURST_HALT 0x00000004 /* idle after finish current memory burst */
++#define ENET_DMA_CH_CFG_INT_STAT 0x04 /* interrupts control and status */
++#define ENET_DMA_CH_CFG_INT_MASK 0x08 /* interrupts mask */
++#define ENET_DMA_CH_CFG_INT_BUFF_DONE 0x00000001 /* buffer done */
++#define ENET_DMA_CH_CFG_INT_DONE 0x00000002 /* packet xfer complete */
++#define ENET_DMA_CH_CFG_INT_NO_DESC 0x00000004 /* no valid descriptors */
++#define ENET_DMA_CH_CFG_INT_RX_ERROR 0x00000008 /* rxdma detect client protocol error */
++#define ENET_DMA_CH_CFG_MAX_BURST 0x0c /* max burst length permitted */
++#define ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL 0x00040000 /* DMA Descriptor Size Selection */
++#define ENET_DMA_CH_CFG_SIZE 0x10
++
++#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR 0x00 /* descriptor ring start address */
++#define ENET_DMA_CH_STATE_RAM_STATE_DATA 0x04 /* state/bytes done/ring offset */
++#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS 0x08 /* buffer descriptor status and len */
++#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR 0x0c /* buffer descrpitor current processing */
++#define ENET_DMA_CH_STATE_RAM_SIZE 0x10
++
++#define DMA_CTL_STATUS_APPEND_CRC 0x00000100
++#define DMA_CTL_STATUS_APPEND_BRCM_TAG 0x00000200
++#define DMA_CTL_STATUS_PRIO 0x00000C00 /* Prio for Tx */
++#define DMA_CTL_STATUS_WRAP 0x00001000 /* */
++#define DMA_CTL_STATUS_SOP 0x00002000 /* first buffer in packet */
++#define DMA_CTL_STATUS_EOP 0x00004000 /* last buffer in packet */
++#define DMA_CTL_STATUS_OWN 0x00008000 /* cleared by DMA, set by SW */
++#define DMA_CTL_LEN_DESC_BUFLENGTH 0x0fff0000
++#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT 16
++#define DMA_CTL_LEN_DESC_MULTICAST 0x40000000
++#define DMA_CTL_LEN_DESC_USEFPM 0x80000000
++
++#endif
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Feb 2021 21:59:51 +0100
-Subject: [PATCH 2/2] net: broadcom: bcm4908enet: add BCM4908 controller driver
-
-BCM4908 SoCs family uses Ethernel controller that includes UniMAC but
-uses different DMA engine (than other controllers) and requires
-different programming.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- MAINTAINERS | 9 +
- drivers/net/ethernet/broadcom/Kconfig | 8 +
- drivers/net/ethernet/broadcom/Makefile | 1 +
- drivers/net/ethernet/broadcom/bcm4908enet.c | 676 ++++++++++++++++++++
- drivers/net/ethernet/broadcom/bcm4908enet.h | 96 +++
- 5 files changed, 790 insertions(+)
- create mode 100644 drivers/net/ethernet/broadcom/bcm4908enet.c
- create mode 100644 drivers/net/ethernet/broadcom/bcm4908enet.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3207,6 +3207,15 @@ F: Documentation/devicetree/bindings/mip
- F: arch/mips/bcm47xx/*
- F: arch/mips/include/asm/mach-bcm47xx/*
-
-+BROADCOM BCM4908 ETHERNET DRIVER
-+M: Rafał Miłecki <rafal@milecki.pl>
-+M: bcm-kernel-feedback-list@broadcom.com
-+L: netdev@vger.kernel.org
-+S: Maintained
-+F: Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-+F: drivers/net/ethernet/broadcom/bcm4908enet.*
-+F: drivers/net/ethernet/broadcom/unimac.h
-+
- BROADCOM BCM5301X ARM ARCHITECTURE
- M: Hauke Mehrtens <hauke@hauke-m.de>
- M: Rafał Miłecki <zajec5@gmail.com>
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -51,6 +51,14 @@ config B44_PCI
- depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
- default y
-
-+config BCM4908ENET
-+ tristate "Broadcom BCM4908 internal mac support"
-+ depends on ARCH_BCM4908 || COMPILE_TEST
-+ default y
-+ help
-+ This driver supports Ethernet controller integrated into Broadcom
-+ BCM4908 family SoCs.
-+
- config BCM63XX_ENET
- tristate "Broadcom 63xx internal mac support"
- depends on BCM63XX
---- a/drivers/net/ethernet/broadcom/Makefile
-+++ b/drivers/net/ethernet/broadcom/Makefile
-@@ -4,6 +4,7 @@
- #
-
- obj-$(CONFIG_B44) += b44.o
-+obj-$(CONFIG_BCM4908ENET) += bcm4908enet.o
- obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
- obj-$(CONFIG_BCMGENET) += genet/
- obj-$(CONFIG_BNX2) += bnx2.o
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908enet.c
-@@ -0,0 +1,676 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/etherdevice.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+
-+#include "bcm4908enet.h"
-+#include "unimac.h"
-+
-+#define ENET_DMA_CH_RX_CFG ENET_DMA_CH0_CFG
-+#define ENET_DMA_CH_TX_CFG ENET_DMA_CH1_CFG
-+#define ENET_DMA_CH_RX_STATE_RAM ENET_DMA_CH0_STATE_RAM
-+#define ENET_DMA_CH_TX_STATE_RAM ENET_DMA_CH1_STATE_RAM
-+
-+#define ENET_TX_BDS_NUM 200
-+#define ENET_RX_BDS_NUM 200
-+#define ENET_RX_BDS_NUM_MAX 8192
-+
-+#define ENET_DMA_INT_DEFAULTS (ENET_DMA_CH_CFG_INT_DONE | \
-+ ENET_DMA_CH_CFG_INT_NO_DESC | \
-+ ENET_DMA_CH_CFG_INT_BUFF_DONE)
-+#define ENET_DMA_MAX_BURST_LEN 8 /* in 64 bit words */
-+
-+#define ENET_MTU_MIN 60
-+#define ENET_MTU_MAX 1500 /* Is it possible to support 2044? */
-+#define ENET_MTU_MAX_EXTRA_SIZE 32 /* L2 */
-+
-+struct bcm4908enet_dma_ring_bd {
-+ __le32 ctl;
-+ __le32 addr;
-+} __packed;
-+
-+struct bcm4908enet_dma_ring_slot {
-+ struct sk_buff *skb;
-+ unsigned int len;
-+ dma_addr_t dma_addr;
-+};
-+
-+struct bcm4908enet_dma_ring {
-+ int is_tx;
-+ int read_idx;
-+ int write_idx;
-+ int length;
-+ u16 cfg_block;
-+ u16 st_ram_block;
-+
-+ union {
-+ void *cpu_addr;
-+ struct bcm4908enet_dma_ring_bd *buf_desc;
-+ };
-+ dma_addr_t dma_addr;
-+
-+ struct bcm4908enet_dma_ring_slot *slots;
-+};
-+
-+struct bcm4908enet {
-+ struct device *dev;
-+ struct net_device *netdev;
-+ struct napi_struct napi;
-+ void __iomem *base;
-+
-+ struct bcm4908enet_dma_ring tx_ring;
-+ struct bcm4908enet_dma_ring rx_ring;
-+};
-+
-+/***
-+ * R/W ops
-+ */
-+
-+static inline u32 enet_read(struct bcm4908enet *enet, u16 offset)
-+{
-+ return readl(enet->base + offset);
-+}
-+
-+static inline void enet_write(struct bcm4908enet *enet, u16 offset, u32 value)
-+{
-+ writel(value, enet->base + offset);
-+}
-+
-+static inline void enet_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+ u32 val;
-+
-+ WARN_ON(set & ~mask);
-+
-+ val = enet_read(enet, offset);
-+ val = (val & ~mask) | (set & mask);
-+ enet_write(enet, offset, val);
-+}
-+
-+static inline void enet_set(struct bcm4908enet *enet, u16 offset, u32 set)
-+{
-+ enet_maskset(enet, offset, set, set);
-+}
-+
-+static inline u32 enet_umac_read(struct bcm4908enet *enet, u16 offset)
-+{
-+ return enet_read(enet, ENET_UNIMAC + offset);
-+}
-+
-+static inline void enet_umac_write(struct bcm4908enet *enet, u16 offset, u32 value)
-+{
-+ enet_write(enet, ENET_UNIMAC + offset, value);
-+}
-+
-+static inline void enet_umac_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+ enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
-+}
-+
-+static inline void enet_umac_set(struct bcm4908enet *enet, u16 offset, u32 set)
-+{
-+ enet_set(enet, ENET_UNIMAC + offset, set);
-+}
-+
-+/***
-+ * Helpers
-+ */
-+
-+static void bcm4908enet_intrs_on(struct bcm4908enet *enet)
-+{
-+ enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+static void bcm4908enet_intrs_off(struct bcm4908enet *enet)
-+{
-+ enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
-+}
-+
-+static void bcm4908enet_intrs_ack(struct bcm4908enet *enet)
-+{
-+ enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+/***
-+ * DMA
-+ */
-+
-+static int bcm4908_dma_alloc_buf_descs(struct bcm4908enet *enet, struct bcm4908enet_dma_ring *ring)
-+{
-+ int size = ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+ struct device *dev = enet->dev;
-+
-+ ring->cpu_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, GFP_KERNEL);
-+ if (!ring->cpu_addr)
-+ return -ENOMEM;
-+
-+ if (((uintptr_t)ring->cpu_addr) & (0x40 - 1)) {
-+ dev_err(dev, "Invalid DMA ring alignment\n");
-+ goto err_free_buf_descs;
-+ }
-+
-+ ring->slots = kzalloc(ring->length * sizeof(*ring->slots), GFP_KERNEL);
-+ if (!ring->slots)
-+ goto err_free_buf_descs;
-+
-+ memset(ring->cpu_addr, 0, size);
-+
-+ ring->read_idx = 0;
-+ ring->write_idx = 0;
-+
-+ return 0;
-+
-+err_free_buf_descs:
-+ dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr);
-+ return -ENOMEM;
-+}
-+
-+static void bcm4908enet_dma_free(struct bcm4908enet *enet)
-+{
-+ struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
-+ struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+ struct device *dev = enet->dev;
-+ int size;
-+
-+ size = rx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+ if (rx_ring->cpu_addr)
-+ dma_free_coherent(dev, size, rx_ring->cpu_addr, rx_ring->dma_addr);
-+ kfree(rx_ring->slots);
-+
-+ size = tx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+ if (tx_ring->cpu_addr)
-+ dma_free_coherent(dev, size, tx_ring->cpu_addr, tx_ring->dma_addr);
-+ kfree(tx_ring->slots);
-+}
-+
-+static int bcm4908enet_dma_alloc(struct bcm4908enet *enet)
-+{
-+ struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
-+ struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+ struct device *dev = enet->dev;
-+ int err;
-+
-+ tx_ring->length = ENET_TX_BDS_NUM;
-+ tx_ring->is_tx = 1;
-+ tx_ring->cfg_block = ENET_DMA_CH_TX_CFG;
-+ tx_ring->st_ram_block = ENET_DMA_CH_TX_STATE_RAM;
-+ err = bcm4908_dma_alloc_buf_descs(enet, tx_ring);
-+ if (err) {
-+ dev_err(dev, "Failed to alloc TX buf descriptors: %d\n", err);
-+ return err;
-+ }
-+
-+ rx_ring->length = ENET_RX_BDS_NUM;
-+ rx_ring->is_tx = 0;
-+ rx_ring->cfg_block = ENET_DMA_CH_RX_CFG;
-+ rx_ring->st_ram_block = ENET_DMA_CH_RX_STATE_RAM;
-+ err = bcm4908_dma_alloc_buf_descs(enet, rx_ring);
-+ if (err) {
-+ dev_err(dev, "Failed to alloc RX buf descriptors: %d\n", err);
-+ bcm4908enet_dma_free(enet);
-+ return err;
-+ }
-+
-+ return 0;
-+}
-+
-+static void bcm4908enet_dma_reset(struct bcm4908enet *enet)
-+{
-+ struct bcm4908enet_dma_ring *rings[] = { &enet->rx_ring, &enet->tx_ring };
-+ int i;
-+
-+ /* Disable the DMA controller and channel */
-+ for (i = 0; i < ARRAY_SIZE(rings); i++)
-+ enet_write(enet, rings[i]->cfg_block + ENET_DMA_CH_CFG, 0);
-+ enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN, 0);
-+
-+ /* Reset channels state */
-+ for (i = 0; i < ARRAY_SIZE(rings); i++) {
-+ struct bcm4908enet_dma_ring *ring = rings[i];
-+
-+ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR, 0);
-+ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_STATE_DATA, 0);
-+ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS, 0);
-+ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR, 0);
-+ }
-+}
-+
-+static int bcm4908enet_dma_alloc_rx_buf(struct bcm4908enet *enet, unsigned int idx)
-+{
-+ struct bcm4908enet_dma_ring_bd *buf_desc = &enet->rx_ring.buf_desc[idx];
-+ struct bcm4908enet_dma_ring_slot *slot = &enet->rx_ring.slots[idx];
-+ struct device *dev = enet->dev;
-+ u32 tmp;
-+ int err;
-+
-+ slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
-+
-+ slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
-+ if (!slot->skb)
-+ return -ENOMEM;
-+
-+ slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
-+ err = dma_mapping_error(dev, slot->dma_addr);
-+ if (err) {
-+ dev_err(dev, "Failed to map DMA buffer: %d\n", err);
-+ kfree_skb(slot->skb);
-+ slot->skb = NULL;
-+ return err;
-+ }
-+
-+ tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+ tmp |= DMA_CTL_STATUS_OWN;
-+ if (idx == enet->rx_ring.length - 1)
-+ tmp |= DMA_CTL_STATUS_WRAP;
-+ buf_desc->ctl = cpu_to_le32(tmp);
-+ buf_desc->addr = cpu_to_le32(slot->dma_addr);
-+
-+ return 0;
-+}
-+
-+static void bcm4908enet_dma_ring_init(struct bcm4908enet *enet,
-+ struct bcm4908enet_dma_ring *ring)
-+{
-+ int reset_channel = 0; /* We support only 1 main channel (with TX and RX) */
-+ int reset_subch = ring->is_tx ? 1 : 0;
-+
-+ /* Reset the DMA channel */
-+ enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, BIT(reset_channel * 2 + reset_subch));
-+ enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, 0);
-+
-+ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_MAX_BURST, ENET_DMA_MAX_BURST_LEN);
-+ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
-+
-+ enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
-+ (uint32_t)ring->dma_addr);
-+}
-+
-+static void bcm4908enet_dma_uninit(struct bcm4908enet *enet)
-+{
-+ struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+ struct bcm4908enet_dma_ring_slot *slot;
-+ struct device *dev = enet->dev;
-+ int i;
-+
-+ for (i = rx_ring->length - 1; i >= 0; i--) {
-+ slot = &rx_ring->slots[i];
-+ if (!slot->skb)
-+ continue;
-+ dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
-+ kfree_skb(slot->skb);
-+ slot->skb = NULL;
-+ }
-+}
-+
-+static int bcm4908enet_dma_init(struct bcm4908enet *enet)
-+{
-+ struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+ struct device *dev = enet->dev;
-+ int err;
-+ int i;
-+
-+ for (i = 0; i < rx_ring->length; i++) {
-+ err = bcm4908enet_dma_alloc_rx_buf(enet, i);
-+ if (err) {
-+ dev_err(dev, "Failed to alloc RX buffer: %d\n", err);
-+ bcm4908enet_dma_uninit(enet);
-+ return err;
-+ }
-+ }
-+
-+ bcm4908enet_dma_ring_init(enet, &enet->tx_ring);
-+ bcm4908enet_dma_ring_init(enet, &enet->rx_ring);
-+
-+ return 0;
-+}
-+
-+static void bcm4908enet_dma_tx_ring_ensable(struct bcm4908enet *enet,
-+ struct bcm4908enet_dma_ring *ring)
-+{
-+ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908enet_dma_tx_ring_disable(struct bcm4908enet *enet,
-+ struct bcm4908enet_dma_ring *ring)
-+{
-+ enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+}
-+
-+static void bcm4908enet_dma_rx_ring_enable(struct bcm4908enet *enet,
-+ struct bcm4908enet_dma_ring *ring)
-+{
-+ enet_set(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908enet_dma_rx_ring_disable(struct bcm4908enet *enet,
-+ struct bcm4908enet_dma_ring *ring)
-+{
-+ unsigned long deadline;
-+ u32 tmp;
-+
-+ enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+
-+ deadline = jiffies + usecs_to_jiffies(2000);
-+ do {
-+ tmp = enet_read(enet, ring->cfg_block + ENET_DMA_CH_CFG);
-+ if (!(tmp & ENET_DMA_CH_CFG_ENABLE))
-+ return;
-+ enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+ usleep_range(10, 30);
-+ } while (!time_after_eq(jiffies, deadline));
-+
-+ dev_warn(enet->dev, "Timeout waiting for DMA TX stop\n");
-+}
-+
-+/***
-+ * Ethernet driver
-+ */
-+
-+static void bcm4908enet_gmac_init(struct bcm4908enet *enet)
-+{
-+ u32 cmd;
-+
-+ cmd = enet_umac_read(enet, UMAC_CMD);
-+ enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
-+ enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
-+
-+ enet_set(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH);
-+ enet_maskset(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH, 0);
-+
-+ enet_set(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB);
-+ enet_maskset(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB, 0);
-+
-+ cmd = enet_umac_read(enet, UMAC_CMD);
-+ cmd &= ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT);
-+ cmd &= ~CMD_TX_EN;
-+ cmd &= ~CMD_RX_EN;
-+ cmd |= CMD_SPEED_1000 << CMD_SPEED_SHIFT;
-+ enet_umac_write(enet, UMAC_CMD, cmd);
-+
-+ enet_maskset(enet, ENET_GMAC_STATUS,
-+ ENET_GMAC_STATUS_ETH_SPEED_MASK |
-+ ENET_GMAC_STATUS_HD |
-+ ENET_GMAC_STATUS_AUTO_CFG_EN |
-+ ENET_GMAC_STATUS_LINK_UP,
-+ ENET_GMAC_STATUS_ETH_SPEED_1000 |
-+ ENET_GMAC_STATUS_AUTO_CFG_EN |
-+ ENET_GMAC_STATUS_LINK_UP);
-+}
-+
-+static irqreturn_t bcm4908enet_irq_handler(int irq, void *dev_id)
-+{
-+ struct bcm4908enet *enet = dev_id;
-+
-+ bcm4908enet_intrs_off(enet);
-+ bcm4908enet_intrs_ack(enet);
-+
-+ napi_schedule(&enet->napi);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int bcm4908enet_open(struct net_device *netdev)
-+{
-+ struct bcm4908enet *enet = netdev_priv(netdev);
-+ struct device *dev = enet->dev;
-+ int err;
-+
-+ err = request_irq(netdev->irq, bcm4908enet_irq_handler, 0, "enet", enet);
-+ if (err) {
-+ dev_err(dev, "Failed to request IRQ %d: %d\n", netdev->irq, err);
-+ return err;
-+ }
-+
-+ bcm4908enet_gmac_init(enet);
-+ bcm4908enet_dma_reset(enet);
-+ bcm4908enet_dma_init(enet);
-+
-+ enet_umac_set(enet, UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
-+
-+ enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
-+ enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
-+ bcm4908enet_dma_rx_ring_enable(enet, &enet->rx_ring);
-+
-+ napi_enable(&enet->napi);
-+ netif_carrier_on(netdev);
-+ netif_start_queue(netdev);
-+
-+ bcm4908enet_intrs_ack(enet);
-+ bcm4908enet_intrs_on(enet);
-+
-+ return 0;
-+}
-+
-+static int bcm4908enet_stop(struct net_device *netdev)
-+{
-+ struct bcm4908enet *enet = netdev_priv(netdev);
-+
-+ netif_stop_queue(netdev);
-+ netif_carrier_off(netdev);
-+ napi_disable(&enet->napi);
-+
-+ bcm4908enet_dma_rx_ring_disable(enet, &enet->rx_ring);
-+ bcm4908enet_dma_tx_ring_disable(enet, &enet->tx_ring);
-+
-+ bcm4908enet_dma_uninit(enet);
-+
-+ free_irq(enet->netdev->irq, enet);
-+
-+ return 0;
-+}
-+
-+static int bcm4908enet_start_xmit(struct sk_buff *skb, struct net_device *netdev)
-+{
-+ struct bcm4908enet *enet = netdev_priv(netdev);
-+ struct bcm4908enet_dma_ring *ring = &enet->tx_ring;
-+ struct bcm4908enet_dma_ring_slot *slot;
-+ struct device *dev = enet->dev;
-+ struct bcm4908enet_dma_ring_bd *buf_desc;
-+ int free_buf_descs;
-+ u32 tmp;
-+
-+ /* Free transmitted skbs */
-+ while (ring->read_idx != ring->write_idx) {
-+ buf_desc = &ring->buf_desc[ring->read_idx];
-+ if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
-+ break;
-+ slot = &ring->slots[ring->read_idx];
-+
-+ dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
-+ dev_kfree_skb(slot->skb);
-+ if (++ring->read_idx == ring->length)
-+ ring->read_idx = 0;
-+ }
-+
-+ /* Don't use the last empty buf descriptor */
-+ if (ring->read_idx <= ring->write_idx)
-+ free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
-+ else
-+ free_buf_descs = ring->read_idx - ring->write_idx;
-+ if (free_buf_descs < 2)
-+ return NETDEV_TX_BUSY;
-+
-+ /* Hardware removes OWN bit after sending data */
-+ buf_desc = &ring->buf_desc[ring->write_idx];
-+ if (unlikely(le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)) {
-+ netif_stop_queue(netdev);
-+ return NETDEV_TX_BUSY;
-+ }
-+
-+ slot = &ring->slots[ring->write_idx];
-+ slot->skb = skb;
-+ slot->len = skb->len;
-+ slot->dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
-+ if (unlikely(dma_mapping_error(dev, slot->dma_addr)))
-+ return NETDEV_TX_BUSY;
-+
-+ tmp = skb->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+ tmp |= DMA_CTL_STATUS_OWN;
-+ tmp |= DMA_CTL_STATUS_SOP;
-+ tmp |= DMA_CTL_STATUS_EOP;
-+ tmp |= DMA_CTL_STATUS_APPEND_CRC;
-+ if (ring->write_idx + 1 == ring->length - 1)
-+ tmp |= DMA_CTL_STATUS_WRAP;
-+
-+ buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
-+ buf_desc->ctl = cpu_to_le32(tmp);
-+
-+ bcm4908enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
-+
-+ if (++ring->write_idx == ring->length - 1)
-+ ring->write_idx = 0;
-+ enet->netdev->stats.tx_bytes += skb->len;
-+ enet->netdev->stats.tx_packets++;
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+static int bcm4908enet_poll(struct napi_struct *napi, int weight)
-+{
-+ struct bcm4908enet *enet = container_of(napi, struct bcm4908enet, napi);
-+ struct device *dev = enet->dev;
-+ int handled = 0;
-+
-+ while (handled < weight) {
-+ struct bcm4908enet_dma_ring_bd *buf_desc;
-+ struct bcm4908enet_dma_ring_slot slot;
-+ u32 ctl;
-+ int len;
-+ int err;
-+
-+ buf_desc = &enet->rx_ring.buf_desc[enet->rx_ring.read_idx];
-+ ctl = le32_to_cpu(buf_desc->ctl);
-+ if (ctl & DMA_CTL_STATUS_OWN)
-+ break;
-+
-+ slot = enet->rx_ring.slots[enet->rx_ring.read_idx];
-+
-+ /* Provide new buffer before unpinning the old one */
-+ err = bcm4908enet_dma_alloc_rx_buf(enet, enet->rx_ring.read_idx);
-+ if (err)
-+ break;
-+
-+ if (++enet->rx_ring.read_idx == enet->rx_ring.length)
-+ enet->rx_ring.read_idx = 0;
-+
-+ len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+
-+ if (len < ENET_MTU_MIN ||
-+ (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
-+ enet->netdev->stats.rx_dropped++;
-+ break;
-+ }
-+
-+ dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
-+
-+ skb_put(slot.skb, len - 4 + 2);
-+ slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
-+ netif_receive_skb(slot.skb);
-+
-+ enet->netdev->stats.rx_packets++;
-+ enet->netdev->stats.rx_bytes += len;
-+ }
-+
-+ if (handled < weight) {
-+ napi_complete_done(napi, handled);
-+ bcm4908enet_intrs_on(enet);
-+ }
-+
-+ return handled;
-+}
-+
-+static const struct net_device_ops bcm96xx_netdev_ops = {
-+ .ndo_open = bcm4908enet_open,
-+ .ndo_stop = bcm4908enet_stop,
-+ .ndo_start_xmit = bcm4908enet_start_xmit,
-+ .ndo_set_mac_address = eth_mac_addr,
-+};
-+
-+static int bcm4908enet_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct net_device *netdev;
-+ struct bcm4908enet *enet;
-+ int err;
-+
-+ netdev = devm_alloc_etherdev(dev, sizeof(*enet));
-+ if (!netdev)
-+ return -ENOMEM;
-+
-+ enet = netdev_priv(netdev);
-+ enet->dev = dev;
-+ enet->netdev = netdev;
-+
-+ enet->base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(enet->base)) {
-+ dev_err(dev, "Failed to map registers: %ld\n", PTR_ERR(enet->base));
-+ return PTR_ERR(enet->base);
-+ }
-+
-+ netdev->irq = platform_get_irq_byname(pdev, "rx");
-+ if (netdev->irq < 0)
-+ return netdev->irq;
-+
-+ dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
-+
-+ err = bcm4908enet_dma_alloc(enet);
-+ if (err)
-+ return err;
-+
-+ SET_NETDEV_DEV(netdev, &pdev->dev);
-+ eth_hw_addr_random(netdev);
-+ netdev->netdev_ops = &bcm96xx_netdev_ops;
-+ netdev->min_mtu = ETH_ZLEN;
-+ netdev->mtu = ENET_MTU_MAX;
-+ netdev->max_mtu = ENET_MTU_MAX;
-+ netif_napi_add(netdev, &enet->napi, bcm4908enet_poll, 64);
-+
-+ err = register_netdev(netdev);
-+ if (err) {
-+ bcm4908enet_dma_free(enet);
-+ return err;
-+ }
-+
-+ platform_set_drvdata(pdev, enet);
-+
-+ return 0;
-+}
-+
-+static int bcm4908enet_remove(struct platform_device *pdev)
-+{
-+ struct bcm4908enet *enet = platform_get_drvdata(pdev);
-+
-+ unregister_netdev(enet->netdev);
-+ netif_napi_del(&enet->napi);
-+ bcm4908enet_dma_free(enet);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id bcm4908enet_of_match[] = {
-+ { .compatible = "brcm,bcm4908enet"},
-+ {},
-+};
-+
-+static struct platform_driver bcm4908enet_driver = {
-+ .driver = {
-+ .name = "bcm4908enet",
-+ .of_match_table = bcm4908enet_of_match,
-+ },
-+ .probe = bcm4908enet_probe,
-+ .remove = bcm4908enet_remove,
-+};
-+module_platform_driver(bcm4908enet_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, bcm4908enet_of_match);
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908enet.h
-@@ -0,0 +1,96 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+#ifndef __BCM4908ENET_H
-+#define __BCM4908ENET_H
-+
-+#define ENET_CONTROL 0x000
-+#define ENET_MIB_CTRL 0x004
-+#define ENET_MIB_CTRL_CLR_MIB 0x00000001
-+#define ENET_RX_ERR_MASK 0x008
-+#define ENET_MIB_MAX_PKT_SIZE 0x00C
-+#define ENET_MIB_MAX_PKT_SIZE_VAL 0x00003fff
-+#define ENET_DIAG_OUT 0x01c
-+#define ENET_ENABLE_DROP_PKT 0x020
-+#define ENET_IRQ_ENABLE 0x024
-+#define ENET_IRQ_ENABLE_OVFL 0x00000001
-+#define ENET_GMAC_STATUS 0x028
-+#define ENET_GMAC_STATUS_ETH_SPEED_MASK 0x00000003
-+#define ENET_GMAC_STATUS_ETH_SPEED_10 0x00000000
-+#define ENET_GMAC_STATUS_ETH_SPEED_100 0x00000001
-+#define ENET_GMAC_STATUS_ETH_SPEED_1000 0x00000002
-+#define ENET_GMAC_STATUS_HD 0x00000004
-+#define ENET_GMAC_STATUS_AUTO_CFG_EN 0x00000008
-+#define ENET_GMAC_STATUS_LINK_UP 0x00000010
-+#define ENET_IRQ_STATUS 0x02c
-+#define ENET_IRQ_STATUS_OVFL 0x00000001
-+#define ENET_OVERFLOW_COUNTER 0x030
-+#define ENET_FLUSH 0x034
-+#define ENET_FLUSH_RXFIFO_FLUSH 0x00000001
-+#define ENET_FLUSH_TXFIFO_FLUSH 0x00000002
-+#define ENET_RSV_SELECT 0x038
-+#define ENET_BP_FORCE 0x03c
-+#define ENET_BP_FORCE_FORCE 0x00000001
-+#define ENET_DMA_RX_OK_TO_SEND_COUNT 0x040
-+#define ENET_DMA_RX_OK_TO_SEND_COUNT_VAL 0x0000000f
-+#define ENET_TX_CRC_CTRL 0x044
-+#define ENET_MIB 0x200
-+#define ENET_UNIMAC 0x400
-+#define ENET_DMA 0x800
-+#define ENET_DMA_CONTROLLER_CFG 0x800
-+#define ENET_DMA_CTRL_CFG_MASTER_EN 0x00000001
-+#define ENET_DMA_CTRL_CFG_FLOWC_CH1_EN 0x00000002
-+#define ENET_DMA_CTRL_CFG_FLOWC_CH3_EN 0x00000004
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_LO 0x804
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_HI 0x808
-+#define ENET_DMA_FLOWCTL_CH1_ALLOC 0x80c
-+#define ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE 0x80000000
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_LO 0x810
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_HI 0x814
-+#define ENET_DMA_FLOWCTL_CH3_ALLOC 0x818
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_LO 0x81C
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_HI 0x820
-+#define ENET_DMA_FLOWCTL_CH5_ALLOC 0x824
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_LO 0x828
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_HI 0x82C
-+#define ENET_DMA_FLOWCTL_CH7_ALLOC 0x830
-+#define ENET_DMA_CTRL_CHANNEL_RESET 0x834
-+#define ENET_DMA_CTRL_CHANNEL_DEBUG 0x838
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS 0x840
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK 0x844
-+#define ENET_DMA_CH0_CFG 0xa00 /* RX */
-+#define ENET_DMA_CH1_CFG 0xa10 /* TX */
-+#define ENET_DMA_CH0_STATE_RAM 0xc00 /* RX */
-+#define ENET_DMA_CH1_STATE_RAM 0xc10 /* TX */
-+
-+#define ENET_DMA_CH_CFG 0x00 /* assorted configuration */
-+#define ENET_DMA_CH_CFG_ENABLE 0x00000001 /* set to enable channel */
-+#define ENET_DMA_CH_CFG_PKT_HALT 0x00000002 /* idle after an EOP flag is detected */
-+#define ENET_DMA_CH_CFG_BURST_HALT 0x00000004 /* idle after finish current memory burst */
-+#define ENET_DMA_CH_CFG_INT_STAT 0x04 /* interrupts control and status */
-+#define ENET_DMA_CH_CFG_INT_MASK 0x08 /* interrupts mask */
-+#define ENET_DMA_CH_CFG_INT_BUFF_DONE 0x00000001 /* buffer done */
-+#define ENET_DMA_CH_CFG_INT_DONE 0x00000002 /* packet xfer complete */
-+#define ENET_DMA_CH_CFG_INT_NO_DESC 0x00000004 /* no valid descriptors */
-+#define ENET_DMA_CH_CFG_INT_RX_ERROR 0x00000008 /* rxdma detect client protocol error */
-+#define ENET_DMA_CH_CFG_MAX_BURST 0x0c /* max burst length permitted */
-+#define ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL 0x00040000 /* DMA Descriptor Size Selection */
-+#define ENET_DMA_CH_CFG_SIZE 0x10
-+
-+#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR 0x00 /* descriptor ring start address */
-+#define ENET_DMA_CH_STATE_RAM_STATE_DATA 0x04 /* state/bytes done/ring offset */
-+#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS 0x08 /* buffer descriptor status and len */
-+#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR 0x0c /* buffer descrpitor current processing */
-+#define ENET_DMA_CH_STATE_RAM_SIZE 0x10
-+
-+#define DMA_CTL_STATUS_APPEND_CRC 0x00000100
-+#define DMA_CTL_STATUS_APPEND_BRCM_TAG 0x00000200
-+#define DMA_CTL_STATUS_PRIO 0x00000C00 /* Prio for Tx */
-+#define DMA_CTL_STATUS_WRAP 0x00001000 /* */
-+#define DMA_CTL_STATUS_SOP 0x00002000 /* first buffer in packet */
-+#define DMA_CTL_STATUS_EOP 0x00004000 /* last buffer in packet */
-+#define DMA_CTL_STATUS_OWN 0x00008000 /* cleared by DMA, set by SW */
-+#define DMA_CTL_LEN_DESC_BUFLENGTH 0x0fff0000
-+#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT 16
-+#define DMA_CTL_LEN_DESC_MULTICAST 0x40000000
-+#define DMA_CTL_LEN_DESC_USEFPM 0x80000000
-+
-+#endif
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -87,6 +87,17 @@
- full-duplex;
- };
- };
-+
-+ port@8 {
-+ reg = <8>;
-+ phy-mode = "internal";
-+ brcm,use-bcm-hdr;
-+ ethernet = <&gmac>;
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
- };
-
- &mdio {
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -112,6 +112,14 @@
+@@ -112,6 +112,13 @@
#size-cells = <1>;
ranges = <0x00 0x00 0x80000000 0x281000>;
-+ gmac: ethernet@2000 {
-+ compatible = "brcm,bcm4908enet";
++ enet: ethernet@2000 {
++ compatible = "brcm,bcm4908-enet";
+ reg = <0x2000 0x1000>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "rx";
+ };
+
usb_phy: usb-phy@c200 {
compatible = "brcm,bcm4908-usb-phy";
reg = <0xc200 0x100>;
+@@ -199,6 +206,18 @@
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
++
++ port@8 {
++ reg = <8>;
++ phy-mode = "internal";
++ brcm,use-bcm-hdr;
++ ethernet = <&enet>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
+ };
+ };
+
projects / openwrt / openwrt.git / commitdiff