diff options
| author | Evan Jobling | 2025-01-23 00:13:35 +0000 |
|---|---|---|
| committer | Sander Vanheule | 2025-02-09 20:36:55 +0000 |
| commit | cbd1acbad3448280a180640e2a1a37a7144e1fb3 (patch) | |
| tree | bb62e97d7c7c71c322fb7d8a0214d7179617a3a2 | |
| parent | 95a4ed8d24a9befff7997f80e11c602e6b0f19d1 (diff) | |
| download | openwrt-cbd1acbad3448280a180640e2a1a37a7144e1fb3.tar.gz | |
realtek: HPE 1920-48G-PoE: allow fan speed control
The JG928A has an RTL8231 on the aux mdio bus. Add it to dts to expose
the GPIO pins used to control and monitor the fan speed. To enable speed
control, add the appropriate kernel driver module to DEVICE_PACKAGES.
Of note, this does not control all fans for the unit. The power supply
fans are not controlled.
Signed-off-by: Evan Jobling <evan@jobling.au>
Link: https://github.com/openwrt/openwrt/pull/17699
Signed-off-by: Sander Vanheule <sander@svanheule.net>
| -rw-r--r-- | target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts | 29 | ||||
| -rw-r--r-- | target/linux/realtek/image/rtl839x.mk | 2 |
2 files changed, 30 insertions, 1 deletions
diff --git a/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts b/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts index e242775434..9765f80d88 100644 --- a/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts +++ b/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts @@ -5,8 +5,37 @@ / { compatible = "hpe,1920-48g-poe", "realtek,rtl8393-soc"; model = "HPE 1920-48G-PoE (JG928A)"; + + gpio_fan_array { + compatible = "gpio-fan"; + + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <5000 0>, + <8200 1>; + + alarm-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + #cooling-cells = <2>; + }; }; &uart1 { status = "okay"; }; + +&mdio_aux { + status = "okay"; + + gpio1: expander@0 { + compatible = "realtek,rtl8231"; + reg = <0>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio1 0 0 37>; + + led-controller { + compatible = "realtek,rtl8231-leds"; + status = "disabled"; + }; + }; +}; diff --git a/target/linux/realtek/image/rtl839x.mk b/target/linux/realtek/image/rtl839x.mk index 14d23ff371..5f9b6d56c6 100644 --- a/target/linux/realtek/image/rtl839x.mk +++ b/target/linux/realtek/image/rtl839x.mk @@ -21,7 +21,7 @@ define Device/hpe_1920-48g-poe $(Device/hpe_1920) SOC := rtl8393 DEVICE_MODEL := 1920-48G-PoE (JG928A) - DEVICE_PACKAGES += realtek-poe + DEVICE_PACKAGES += realtek-poe kmod-hwmon-gpiofan H3C_DEVICE_ID := 0x0001002b endef TARGET_DEVICES += hpe_1920-48g-poe |