diff options
| author | Rosen Penev | 2024-12-16 23:07:50 +0000 |
|---|---|---|
| committer | Hauke Mehrtens | 2024-12-23 22:46:42 +0000 |
| commit | d3f8b1cf17ad0a241316f217ea2710fcf5228005 (patch) | |
| tree | 9ff58bc83666e486ddc83a62dbbb7cf3ddd43d1b | |
| parent | eabfe691cef15da08ad515a7724d01da1b11ae73 (diff) | |
| download | openwrt-d3f8b1cf17ad0a241316f217ea2710fcf5228005.tar.gz | |
lantiq: use nvmem for fritz73x0
These units use AR9287, which has a calibration size of 3d8.
Also fixed compatible string to the proper one to indicate AR9287.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17278
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 files changed, 14 insertions, 7 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts index 9ea6c3929c..ba6c487048 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts @@ -136,6 +136,10 @@ #address-cells = <1>; #size-cells = <1>; + cal_ath9k_cal_985: calibration@985 { + reg = <0x985 0x3d8>; + }; + macaddr_ath9k_cal_a91: macaddr@a91 { compatible = "mac-base"; reg = <0xa91 0x6>; @@ -180,8 +184,9 @@ reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>; wifi@0,0 { - compatible = "pci0,0"; + compatible = "pci168c,002d"; reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + nvmem-cells = <&cal_ath9k_cal_985>; + nvmem-cell-names = "calibration"; }; }; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts index 953a8ccbf7..c09d3879b4 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts @@ -163,6 +163,10 @@ #address-cells = <1>; #size-cells = <1>; + cal_ath9k_cal_985: calibration@985 { + reg = <0x985 0x3d8>; + }; + macaddr_ath9k_cal_a91: macaddr@a91 { compatible = "mac-base"; reg = <0xa91 0x6>; @@ -206,9 +210,10 @@ reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>; wifi@0,0 { - compatible = "pci0,0"; + compatible = "pci168c,002d"; reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + nvmem-cells = <&cal_ath9k_cal_985>; + nvmem-cell-names = "calibration"; }; }; diff --git a/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 98bb9af694..91eb3f1680 100644 --- a/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -45,9 +45,6 @@ case "$FIRMWARE" in caldata_extract "calibration" 0xf000 0x1000 ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2) 0x20c ;; - avm,fritz7312|avm,fritz7320) - caldata_extract "urlader" 0x985 0x1000 - ;; *) caldata_die "board $board is not supported yet" ;; |