ipq40xx: dts: fix SPI chip select GPIO polarity

The SPI chip select GPIO polarity is active low by default. We must
use "spi-cs-high" dts property to toggle the polarity. The polarity
on "cs-gpios" won't take effect at all[1]. Fix these incorrect GPIO
polarities to silence the kernel warnings.

[1] Refer to Linux/Documentation/devicetree/bindings/spi/spi-controller.yaml
```
      device node     | cs-gpio       | CS pin state active | Note
      ================+===============+=====================+=====
      spi-cs-high     | -             | H                   |
      -               | -             | L                   |
      spi-cs-high     | ACTIVE_HIGH   | H                   |
      -               | ACTIVE_HIGH   | L                   | 1
      spi-cs-high     | ACTIVE_LOW    | H                   | 2
      -               | ACTIVE_LOW    | L                   |

      Notes:
      1) Should print a warning about polarity inversion.
         Here it would be wise to avoid and define the gpio as
         ACTIVE_LOW.
      2) Should print a warning about polarity inversion
         because ACTIVE_LOW is overridden by spi-cs-high.
         Should be generally avoided and be replaced by
         spi-cs-high + ACTIVE_HIGH.
```

Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19845
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

59 files changed, 71 insertions, 71 deletions

diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-a42.dts
index 6d1babf00e..bd7cfb189d 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-a42.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-a42.dts
@@ -139,7 +139,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts
index 83b4addb79..4f1db96b6a 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts
@@ -124,8 +124,8 @@
 
 	pinctrl-0 = <&spi0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm  4 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>,
+		   <&tlmm  4 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-cap-ac.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-cap-ac.dts
index 627ccd5b70..1d1b381be0 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-cap-ac.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-cap-ac.dts
@@ -155,7 +155,7 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		reg = <0>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-cs-w3-wd1200g-eup.dts
index 469a6ca757..6580e0161e 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-cs-w3-wd1200g-eup.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-cs-w3-wd1200g-eup.dts
@@ -138,7 +138,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-dap-2610.dts
index 69164540cd..62a1607db4 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-dap-2610.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-dap-2610.dts
@@ -82,7 +82,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ea6350v3.dts
index 6cace3b88f..b2a263a535 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ea6350v3.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ea6350v3.dts
@@ -175,8 +175,8 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>,
+		   <&tlmm 59 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
index 049b3a5ba3..4acf44dc16 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
@@ -127,7 +127,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	m25p80@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ecw5211.dts
index 777788c59a..da19a4c93e 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ecw5211.dts
@@ -158,7 +158,7 @@
 
 	pinctrl-0 = <&spi0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>, <&tlmm 4 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-emd1.dts
index 1ef63bdc98..477eeb9946 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-emd1.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-emd1.dts
@@ -122,7 +122,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-emr3500.dts
index 9d70501cb7..3405ee5c9d 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-emr3500.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-emr3500.dts
@@ -119,7 +119,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	m25p80@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ens620ext.dts
index 50cac400d7..042086ac8c 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ens620ext.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ens620ext.dts
@@ -143,7 +143,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ex61x0v2.dtsi
index 367dd20a7a..e145a344e9 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ex61x0v2.dtsi
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-ex61x0v2.dtsi
@@ -185,7 +185,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	mx25l12805d@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-fritzbox-4040.dts
index 0d7d8883fc..a6acb243f8 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-fritzbox-4040.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-fritzbox-4040.dts
@@ -154,7 +154,7 @@
 	status = "okay";
 	/delete-property/ dmas;
 	/delete-property/ dma-names;
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-a1300.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-a1300.dts
index 4293191b07..7dc583b71a 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-a1300.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-a1300.dts
@@ -125,7 +125,7 @@
 
 	pinctrl-0 = <&spi0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>, <&tlmm 5 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-ap1300.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-ap1300.dts
index 4ed8a82af6..c6ab892867 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-ap1300.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-gl-ap1300.dts
@@ -109,7 +109,7 @@
 
 	pinctrl-0 = <&spi0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>, <&tlmm 5 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		status = "okay";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-hap-ac2.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-hap-ac2.dts
index ae244a6696..ddf6ef2df7 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-hap-ac2.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-hap-ac2.dts
@@ -150,7 +150,7 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		reg = <0>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dtsi
index fcacb98cb9..6d6fa353f4 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dtsi
@@ -112,7 +112,7 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>, <&tlmm 59 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		status = "okay";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-magic-2-wifi-next.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-magic-2-wifi-next.dts
index 43f87b5dd8..0af2e917a2 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-magic-2-wifi-next.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-magic-2-wifi-next.dts
@@ -169,7 +169,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287.dts
index fc4bae6937..e47846e87a 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287.dts
@@ -30,9 +30,9 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 1 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>,
+		   <&tlmm 59 GPIO_ACTIVE_LOW>,
+		   <&tlmm 1 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287plus.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287plus.dts
index 8eb8ce8503..99017f49be 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287plus.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287plus.dts
@@ -30,9 +30,9 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 1 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>,
+		   <&tlmm 59 GPIO_ACTIVE_LOW>,
+		   <&tlmm 1 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts
index 29220624de..9cc4ff724e 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-mf287pro.dts
@@ -48,8 +48,8 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>,
-				<&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>,
+		   <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts
index d33afc7d38..0f91405737 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts
@@ -165,7 +165,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-pa1200.dts
index 8040bb494b..2ce00f15d6 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-pa1200.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-pa1200.dts
@@ -131,7 +131,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-rt-ac58u.dts
index 7477d5ddc4..1c698b4b41 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-rt-ac58u.dts
@@ -170,8 +170,8 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>,
+		   <&tlmm 59 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		/*
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-rutx.dtsi
index cc43e222e4..47f0677c9d 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-rutx.dtsi
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-rutx.dtsi
@@ -141,7 +141,7 @@
 &blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 63 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>, <&tlmm 63 GPIO_ACTIVE_LOW>;
 	num-cs = <2>;
 	status = "okay";
 
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-sxtsq-5-ac.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-sxtsq-5-ac.dts
index f588d94142..be58defe96 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-sxtsq-5-ac.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-sxtsq-5-ac.dts
@@ -154,7 +154,7 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		reg = <0>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wac510.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wac510.dts
index fc862a25b1..eb92be7f5c 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wac510.dts
@@ -201,8 +201,8 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>,
+		   <&tlmm 59 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wap-ac.dtsi b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wap-ac.dtsi
index 83dd4b925b..9ce753f87d 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wap-ac.dtsi
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wap-ac.dtsi
@@ -118,7 +118,7 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		reg = <0>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-whw01.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-whw01.dts
index 9809ac8777..190924920a 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-whw01.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-whw01.dts
@@ -83,7 +83,7 @@
 	status = "okay";
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>, <&tlmm 4 GPIO_ACTIVE_LOW>;
 
 	nor@0 {
 		reg = <0>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wr-1.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wr-1.dts
index 990eb70daa..f9daf3f32d 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wr-1.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wr-1.dts
@@ -92,7 +92,7 @@
 &blsp1_spi1 {
 	status = "okay";
 
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts
index 83ae05c626..f041681d65 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts
@@ -149,7 +149,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	mx25l12805d@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wrtq-329acn.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wrtq-329acn.dts
index 7c8e81de33..8b5bf7a051 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4018-wrtq-329acn.dts
@@ -92,8 +92,8 @@
 &blsp1_spi1 {
 	status = "okay";
 
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>,
+		   <&tlmm 59 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&spi0_pins>;
 	pinctrl-names = "default";
 
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-a62.dts
index eb22dbafcd..8309b2770d 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-a62.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-a62.dts
@@ -146,7 +146,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts
index e290339dbe..a6375a9b32 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts
@@ -90,7 +90,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts
index ad4748a081..4908a99a59 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts
@@ -128,7 +128,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts
index cd8a4ecd09..3f91955d1d 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts
@@ -210,7 +210,7 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-hap-ac3-lte6-kit.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-hap-ac3-lte6-kit.dts
index cfb69f4d56..fc3977c0c9 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-hap-ac3-lte6-kit.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-hap-ac3-lte6-kit.dts
@@ -184,7 +184,7 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		reg = <0>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-hap-ac3.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-hap-ac3.dts
index bbc93c083d..0f311d0e2e 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-hap-ac3.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-hap-ac3.dts
@@ -221,7 +221,7 @@
 
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		reg = <0>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-le1.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-le1.dts
index 1577ed58bb..76125a76b7 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-le1.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-le1.dts
@@ -86,7 +86,7 @@
 };
 
 &blsp1_spi1 {
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts
index 5a11757479..ad3509ddc5 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts
@@ -166,7 +166,7 @@
 &blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	m25p80@0 {
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts
index 5d9c201cca..025fd2ac05 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts
@@ -147,7 +147,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		/* u-boot is looking for "n25q128a11" property */
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf282plus.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf282plus.dts
index 763ebd49eb..011c7d56e6 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf282plus.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf282plus.dts
@@ -129,7 +129,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		/* u-boot is looking for "n25q128a11" property */
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf286d.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf286d.dts
index 91cf49b1b0..07e45baea7 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf286d.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf286d.dts
@@ -123,7 +123,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		/* u-boot is looking for "n25q128a11" property */
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf289f.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf289f.dts
index acee13ad2d..92c68b2fcf 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf289f.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf289f.dts
@@ -132,8 +132,8 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>,
+		   <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-oap100.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-oap100.dts
index d50ca7abf2..db9edd16ec 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-oap100.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-oap100.dts
@@ -165,7 +165,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-pa2200.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-pa2200.dts
index abc54b1330..9bec8f3042 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-pa2200.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-pa2200.dts
@@ -134,7 +134,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-rtl30vw.dts
index 593b3959fc..d1900e0a22 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-rtl30vw.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-rtl30vw.dts
@@ -188,7 +188,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>, <&tlmm 59 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		/*"n25q128a11" is required for proper nand recognition in u-boot. */
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-whw03.dtsi b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-whw03.dtsi
index 14e6a5498a..3aeb70c844 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-whw03.dtsi
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-whw03.dtsi
@@ -188,7 +188,7 @@
 	pinctrl-0 = <&spi_1_pins>;
 	pinctrl-names = "default";
 
-	cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
 
 	zigbee@0 {
 		compatible = "silabs,em3581";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-wifi.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-wifi.dts
index 491a497af0..a93424acb0 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-wifi.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-wifi.dts
@@ -396,7 +396,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -409,7 +409,7 @@
 	pinctrl-0 = <&spi_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
 
 	/*
 	 * This "spidev" was included in the manufacturer device tree. I
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
index 40819fd603..0c1644bfae 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
@@ -203,7 +203,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>, <&tlmm 41 GPIO_ACTIVE_LOW>;
 	num-cs = <2>;
 
 	flash0@0 {
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4028-wpj428.dts
index fd7878b47a..0e4e97c26e 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4028-wpj428.dts
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	m25p80@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303.dts
index 7e484db1b5..1c801d2c2b 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303.dts
@@ -63,7 +63,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303h.dts
index 1cb1b9d5dd..737961e8ef 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303h.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-303h.dts
@@ -238,7 +238,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>, <&tlmm 59 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-365.dts
index 6df788a745..acdd472877 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-365.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ap-365.dts
@@ -84,7 +84,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-b1300.dts
index 2aea68d520..3f687f4de6 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-b1300.dts
@@ -130,7 +130,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 	mx25l25635f@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-s1300.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-s1300.dts
index 6d7a0aa2cd..ba01ab10e4 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-s1300.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-gl-s1300.dts
@@ -126,7 +126,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap3915i.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap3915i.dts
index 533ff388a9..16411c62f8 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap3915i.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap3915i.dts
@@ -189,7 +189,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap391x.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap391x.dts
index 254de0a46d..45b1e48468 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap391x.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-ws-ap391x.dts
@@ -264,7 +264,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq40x9-dr40x9.dts b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq40x9-dr40x9.dts
index 0bf5e63ac0..c6e8648b54 100644
--- a/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq40x9-dr40x9.dts
+++ b/target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq40x9-dr40x9.dts
@@ -183,7 +183,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";