mvebu: puzzle: wan LED and fix default network

Fix default network configuration of the Puzzle-M902 so all LAN ports
are included in the LAN bridge.
Setup network LED to indicate WAN port link status, like vendor
firmware does as well.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds
new file mode 100644 (file)
index 0000000..809a64a
--- /dev/null
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+iei,puzzle-m901)
+       ucidef_set_led_netdev "wan" "WAN" "white:network" "eth0" "link"
+       ;;
+iei,puzzle-m902)
+       ucidef_set_led_netdev "wan" "WAN" "white:network" "eth2" "link"
+       ;;
+esac
+
+board_config_flush
+
+exit 0

diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
old mode 100755 (executable)
new mode 100644 (file)
index 24a72f3..f3c59bf
--- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
@@ -17,7 +17,7 @@ iei,puzzle-m901)
        ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
        ;;
 iei,puzzle-m902)
-       ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5 eth10 eth11 eth12" "eth0"
+       ucidef_set_interfaces_lan_wan "eth0 eth1 eth3 eth4 eth5 eth6 eth7 eth8" "eth2"
        ;;
 marvell,armada8040-mcbin-doubleshot|\
 marvell,armada8040-mcbin-singleshot)