staging/981213/target/linux, branch main

ramips: add support for Z-ROUTER ZR-2660

2024-03-12T22:57:41Z

This commit adds support for Z-ROUTER ZR-2660 (also known as Routerich AX1800) wireless WiFi 6 router. Specification ------------- - SoC : MediaTek MT7621AT, MIPS, 880 MHz - RAM : 256 MiB - Flash : NAND 128 MiB (AMD/Spansion S34ML01G2) - WLAN : - 2.4 GHz : MediaTek MT7905D/MT7975 (14c3:7916), b/g/n/ax, MIMO 2x2 - 5 GHz : MediaTek MT7915E (14c3:7915), a/n/ac/ax, MIMO 2x2 - Ethernet : 10/100/1000 Mbps x4 (1x WAN, 3x LAN) - USB : 1x 2.0 - UART : 3.3V, 115200n8, pins are silkscreened on the pcb - Buttons : 1x Reset - LEDs : 1x WiFi 2.4 GHz (green) 1x WiFi 5 GHz (green) 1x LAN (green) 1x WAN (green) 1x WAN no-internet (red) - Power : 12 VDC, 1 A Installation ------------ 1. Run tftp server on your PC (IP: 192.168.2.2) and put OpenWrt initramfs image (initramfs.bin) to the tftp root dir 2. Open the following link in the browser to enable telnet: http://192.168.2.1/cgi-bin/telnet_ssh 3. Connect to the router (default IP: 192.168.2.1) using telnet shell (credentials - user:admin) 4. Run the following commands in the telnet shell (this will install OpenWrt initramfs image on nand flash): cd /tmp tftp -g -r initramfs.bin 192.168.2.2 mtd write initramfs.bin firmware mtd erase firmware_backup reboot 5. Copy OpenWrt sysupgrade image (sysupgrade.bin) to the /tmp dir of the router 6. Connect to the router (IP: 192.168.1.1) using ssh shell and run sysupgrade command: sysupgrade -n /tmp/sysupgrade.bin Return to stock --------------- 1. Copy stock firmware (stock.bin) to the /tmp dir of the router using scp 2. Run following command in the router shell: cd /tmp mtd write stock.bin firmware reboot Recovery -------- Connect uart (pins are silkscreened on the pcb), interrupt boot process by pressing any key, use u-boot menu to flash stock firmware image or OpenWrt initramfs image. MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | 24:0f:5e:xx:xx:4c | label | | WAN | 24:0f:5e:xx:xx:4d | label+1 | | WLAN 2g | 24:0f:5e:xx:xx:4e | label+2 | | WLAN 5g | 24:0f:5e:xx:xx:4f | label+3 | +---------+-------------------+-----------+ The WLAN 2.4 MAC was found in 'factory', 0x4 The LAN MAC was found in 'factory', 0xfff4 The WAN MAC was found in 'factory', 0xfffa Signed-off-by: Mikhail Zhilkin

kernel: config: 6.6: disable ZSTD debug info compression by default

2024-03-12T18:49:56Z

When kernel 6.6 is being compiled with GCC13 it will prompt for: Compressed Debug information > 1. Don't compress debug information (DEBUG_INFO_COMPRESSED_NONE) 2. Compress debugging information with zlib (DEBUG_INFO_COMPRESSED_ZLIB) 3. Compress debugging information with zstd (DEBUG_INFO_COMPRESSED_ZSTD) (NEW) This is because kernel now also has support for compressing debug info with ZSTD, so add the missing symbol and disable it by default. Signed-off-by: Robert Marko

ramips: add support for YunCore G720

2024-03-12T16:48:42Z

The YunCore G720 is a dual band 802.11ax router with 5 GbE ports. Specs: - SoC: MediaTek MT7621 - Ethernet: 5x GbE ports (built-in MT7530) - Wireless 2.4GHz / 5GHz: MediaTek MT7915E - RAM: 256MiB - ROM: 16MiB (W25Q128) - 1 Button (reset) - 8 LEDs (1x system, 2x wifi, 5x switch ports) Flash instructions: The vendor firmware is based on OpenWrt, the sysupgrade image can be flashed using the '-F' (force) option on the CLI. Make sure not to keep settings when doing so. Signed-off-by: Daniel Golle

ramips: switch to 6.1 kernel

2024-03-12T16:28:52Z

We have had the testing kernel for several weeks now. Let's switch to 6.1 to have more testers. Additionally, 6.6 is already in the pipeline. Signed-off-by: Nick Hainke

kernel: config: add missing symbol for kenrel 6.6

2024-03-12T14:52:28Z

CONFIG_HID_SUPPORT: Set default value for kmod-hid CONFIG_USB_CDNS3_IMX: CONFIG_USB_CDNS3_PCI_WRAP: CONFIG_USB_CDNSP_PCI: Introduced by db0d7cf6a1 (usb: add cdns3 support) Signed-off-by: Weijie Gao

Revert "kernel: config: add symbol introduced with 6.2"

2024-03-12T12:01:59Z

This reverts commit 7ea82bc17d1583f4d9d46397846b0eb63e6651eb. This commit does not meet formal requirments, and has been merged due to my error. Signed-off-by: Robert Marko

starfive: refresh patches

2024-03-12T09:27:38Z

CI reported that patches need to be refreshed, so lets refresh. Signed-off-by: Robert Marko

kernel: config: add symbol introduced with 6.2

2024-03-12T04:06:14Z

CONFIG_DEBUG_INFO_COMPRESSED_ZSTD, required by GCC 13.0+ Compress the debug information using zstd. This may provide better compression than zlib, for about the same time costs, but requires newer toolchain support. Requires GCC 13.0+ or Clang 16.0+, binutils 2.40+, and zstd. Signed-off-by: CharlesMengCA <58993776+CharlesMengCA@users.noreply.github.com>

mediatek: add Linux 6.6 as testing kernel

2024-03-11T21:22:12Z

Add KERNEL_TESTING_PATCHVER for Linux 6.6. Signed-off-by: Daniel Golle

mediatek: add kernel configs for Linux 6.6

2024-03-11T21:22:12Z

Add config-6.6 for all mediatek subtargets. Signed-off-by: Daniel Golle