staging/chunkeey, branch state

apm821xx: wndr4700: mx60: convert to DSA

2019-01-18T14:50:39Z

This patch converts both the wndr4700 and mx60 to use a patched qca8k driver to drive DSA. Both have to be converted since the old AR8216 phy/swconfig driver had to be disabled as otherwise it would conflict with the dsa driver since swconfig utilizes the phy framework. Signed-off-by: Christian Lamparter

ipq40xx: 4.14 port of upstream MX25L25635[E|F] fix

2019-01-18T14:50:39Z

Untested

ipq40xx: use upstream MX25L25635[E|F] fix

2019-01-18T14:50:39Z

This patch removes the previous hack that was necessary for the ZyXEL NBG6617: 303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch And replaces it with the 5.0-rc1 solution. This will likely also enable Compex WPJ428's that still use the original SPL1/u-boot will now sucessfully reboot. Signed-off-by: Christian Lamparter

ath10k-ct: reduce memory pressure

2019-01-18T14:50:39Z

No-Signed-Off

mbedtls: Kconfig option to enable/disable debug functions

2019-01-18T14:50:38Z

This introduces a new Kconfig option to switch on/off mbedtls' support for debug functions. The idea behind is to inspect TLS traffic with Wireshark for debug purposes. At the moment, there is no native or 'nice' support for this, but at https://github.com/Lekensteyn/mbedtls/commit/68aea15833e1ac9290b8f52a4223fb4585fb3986 an example implementation can be found which uses the debug functions of the library. However, this requires to have this debug stuff enabled in the library, but at the moment it is staticly patched out. So this patch removes the static part from the configuration patch and introduces a dynamic config file editing during build. When enabled, this heavily increases the library size, so I added a warning in the Kconfig help section. Signed-off-by: Michael Heimpold

build: fix umask detection bashism

2019-01-18T14:50:38Z

the leading 0 is optional and not emitted by some shells Signed-off-by: Thorsten Glaser

mtd: Fail when verify fails

2019-01-18T14:50:38Z

Return non-zero exit code when mtd verify fails. Signed-off-by: Michal Hrusecky

busybox: enable swapon/off by default to make it consistent with mkswap

2019-01-18T14:50:38Z

No size increase on busybox binary. Since busybox mkswap is already enabled by default it seems reasonable to enable swapon/off too. For ex. this obsoletes installing block-mount dependency for zram-swap. Signed-off-by: Emil Muratov

zram-swap: Add zram compaction and statistics info output

2019-01-18T14:50:38Z

Executing '/etc/init.d/zram start' during runtime (with a swap being already mounted) triggers zram device compaction and prints out nice stats info about zram memory usage Signed-off-by: Emil Muratov

zram-swap: Fix busybox dependency check

2019-01-18T14:50:38Z

- fix dependency on BUSYBOX_CONFIG_SWAPONOFF (removed in 84da2a6) - add busybox defaults checking (fix zram-swap always installs swap-utils and libblkid as dependency, even if busybox includes mkswap by default) Signed-off-by: Emil Muratov