staging/chunkeey/include/image-commands.mk, branch state

firmware-utils: mksercommfw: overhaul image creation

2019-01-15T18:11:54Z

Move the zip compression into a build recipe. Pad the image using the existing build recipes as well to remove duplicate functionality Change the code to append header and footer in two steps. Allow to use a fixed filename as the netgear update image does. Use a fixed timestamp within the zip archive to make the images reproducible. Due to the changes we are now compatible to the gnu89 c standard used by default on the buildbots and we don't need to force a more recent standard anymore. Beside all changes, the footer still looks wrong in compare to the netgear update image. Signed-off-by: Mathias Kresin

build: remove duplicate mksercomfw image recipe

2019-01-13T17:31:10Z

Keep the ramips/mt76x8 copy, since it's only required for this target at the moment. Signed-off-by: Mathias Kresin

build: move seama commands to image-commands.mk

2018-12-30T19:08:13Z

Move it to image-commands.mk to get rid of duplicate recipes. Signed-off-by: Mathias Kresin

build: move xor-image into image-commands

2018-12-24T18:18:07Z

I moved xor-image into image-commands.mk to use it in ath79 target. It required for NEC WG800HP. Signed-off-by: INAGAKI Hiroshi

build: drop cameo-factory recipe

2018-12-17T22:21:40Z

The cameo factory images are created using existing image build commands, which makes the code obsolete. Signed-off-by: Mathias Kresin

build: move append-string to image-commands.mk

2018-12-17T22:21:26Z

Move it to image-commands.mk so that it can used by other targets. Signed-off-by: Mathias Kresin

image: remove duplicate cameo-factory

2018-12-17T18:44:45Z

The function was accidentally added twice. Remove the duplicate. Signed-off-by: Sebastian Kemper

ath79: add d-link dir-825-c1 and dir-835-a1

2018-12-16T23:21:34Z

This commit ports both dir-825-c1 and dir-835-a1 from ar71xx to ath79. They're pretty much identical, except dir-835-a1 has less LEDs. The routers come with 128 MByte of RAM and 16 MBytes of flash and sport 2.4GHz and 5.0GHz wireless. Both routers have entries already in OpenWrt's TOH. Please check there for more information on these antiquities. https://openwrt.org/toh/hwdata/d-link/d-link_dir-825_c1 https://openwrt.org/toh/hwdata/d-link/d-link_dir-835_a1 Installation: 1. Connect to the web interface of the vendor firmware (usually listening on 192.168.0.1). 2. Go to "Tools", then "Firmware". 3. In the "Firmware Upgrade" box click "Browse". 4. Select the OpenWrt factory image for your router. 5. Click "Upload", confirm the popups if you agree to flash the file you selected. 6. Wait for firmware upgrade to complete. It takes about 5 minutes. Run-tested on dir-825-c1. dir-835-a1 should work as well, but I don't have this router so I can't confirm. Signed-off-by: Sebastian Kemper Signed-off-by: Christian Lamparter [trivial changes]

image: add cameo-factory command

2018-12-16T23:21:34Z

This command enables factory image generation for Cameo boards. On upgrade the vendor firmware will check the size of the provided image and if a specific string is located at the end of the binary. cameo-factory will generate an image that the vendor firmware accepts. Tested on a D-Link DIR-825 C1 with vendor firmwares 3.01 and 3.04. Signed-off-by: Sebastian Kemper

ath79: modify mtd partitions for Buffalo BHR-4GRV2

2018-11-26T11:28:17Z

This commit modifies mtd partitions define for Buffalo BHR-4GRV2 and move it to generic subtarget. In Buffalo BHR-4GRV2, "kernel" partition is located behined "rootfs" partition in the stock firmware. This causes the size of the kernel to be limited by the fixed value. 0x50000 0xe80000 0xff0000 +-------------------------------+--------------+ | rootfs | kernel | | (14528k) | (1472k) | +-------------------------------+--------------+ After ar71xx was updated to Kernel 4.14, the kernel size of BHR-4GRV2 exceeded the limit, and it breaks builds on official buildbot. Since this issue was also confirmed in ath79, I modified the mtd partitions to get rid of that limitation. 0x50000 0xff0000 +----------------------------------------------+ | firmware | | (16000k) | +----------------------------------------------+ However, this commit breaks compatibility with ar71xx firmware, so I dropped "SUPPORTED_DEVICES += bhr-4grv2". This commit requires new flash instruction instead of the old one. Flash instruction using initramfs image: 1. Connect the computer to the LAN port of BHR-4GRV2 2. Set the IP address of the computer to 192.168.12.10 3. Rename the OpenWrt initramfs image to "bhr4grv2-uImage-initramfs-gzip.bin" and place it into the TFTP directory 4. Start the tftp server on the computer 5. While holding down the "ECO" button, connect power cable to BHR-4GRV2 and turn on it 6. Flashing (orange) diag LED and release the finger from the button, BHR-4GRV2 downloads the intiramfs image from TFTP server and boot with it 7. On the initramfs image, create "/etc/fw_env.config" file with following contents /dev/mtd1 0x0 0x10000 0x10000 8. Execute following commands to add environment variables for u-boot fw_setenv ipaddr 192.168.12.1 fw_setenv serverip 192.168.12.10 fw_setenv ethaddr 00:aa:bb:cc:dd:ee fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" 9. Perform sysupgrade with squashfs-sysupgrade image 10. Wait ~150 seconds to complete flashing And this commit includes small fix; BHR-4GRV2 has QCA9557 as a SoC, not QCA9558. Signed-off-by: INAGAKI Hiroshi