staging/chunkeey/package/firmware, branch state

wireless-regdb: update to 2018-10-24

2019-01-18T14:50:38Z

Fixes build issues on a python3 host (issues with the print statement formatting in the current build). Includes 100-regdb-write-firmware-file-format-version-code-20.patch and other fixes. Closes bugs.openwrt.org/index.php?do=details&task_id=1605. Uses snapshot as requested. Signed-off-by: Zachary Riedlshah

ath10k-firmware: update Candela Tech firmware images

2018-12-20T08:23:45Z

- Removed an assert from wave-1 firmware images - Fix three recently reported firmware crashes in wave-2 images Signed-off-by: Jo-Philipp Wich

linux-firmware: broadcom: package 4366C0 FullMAC firmware

2018-12-17T11:51:00Z

Signed-off-by: Rafał Miłecki

linux-firmware: update to the commit from 2018-12-16

2018-12-17T10:42:45Z

It includes e.g. new Broadcom FullMAC firmwares for 4366B1 and 4366C0. Signed-off-by: Rafał Miłecki

ath10k-firmware: update all CT firmware variants

2018-12-15T14:25:24Z

Wave-1 firmware (988x, 9887): bug fixes Wave-2 firmware (4019, 9888, 99x0, 9984): fix protected management frames, rate-ctrl fixes, and performance improvements Signed-off-by: Michael Yartys

ath10k-firmware: Fix mirror hash sum (FS#1983)

2018-12-09T14:07:02Z

This now matches what was generated locally on my PC and the file on the mirror server. Fixes: 575d0240f9593 ("ath10k-firmware: update board-2.bin for community firmwares") Signed-off-by: Christian Lamparter

ipq40xx: add support for EnGenius EAP1300

2018-12-05T08:40:32Z

SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: Power, LAN, MESH, WLAN 2.4GHz, WLAN 5GHz 1. Load Ramdisk via U-Boot To set up the flash memory environment, do the following: a. As a preliminary step, ensure that the board console port is connected to the PC using these RS232 parameters: * 115200bps * 8N1 b. Confirm that the PC is connected to the board using one of the Ethernet ports. Set a static ip 192.168.99.8 for Ethernet that connects to board. The PC must have a TFTP server launched and listening on the interface to which the board is connected. At this stage power up the board and, after a few seconds, press 4 and then any key during the countdown. U-BOOT> set serverip 192.168.99.8 && set ipaddr 192.168.99.9 && tftpboot 0x84000000 openwrt.itb && bootm 2. Load image via GUI a. Upgrade EAP1300 to FW v3.5.3.2 In the GUI, System Manager > Firmware > Firmware Upgrade, to do upgrade. b. Transfer to OpenWrt from EnGenius. In Firmware Upgrade page, to upgrade yours openwrt-ipq40xx-engenius_eap1300-squashfs-sysupgrade.bin. 3. Revert to EnGenius EAP1300 To flash openwrt-ipq40xx-engenius_eap1300-squashfs-factory.bin by using sysupgrade command and "DO NOT" keep configuration. $ sysupgrade –n openwrt-ipq40xx-engenius_eap1300-squashfs-factory.bin Signed-off-by: Steven Lin

Revert "intel-microcode: create early load microcode image"

2018-11-27T17:58:37Z

This reverts commit 022ffb56b2491fd7d8051ac6e6c7622ecc313d8f. Signed-off-by: John Crispin

Revert "amd64-microcode: create early load microcode image"

2018-11-27T17:58:33Z

This reverts commit 975019b3a755ec3b91864b60b45e5ee104075096. Signed-off-by: John Crispin

amd64-microcode: create early load microcode image

2018-11-26T11:05:45Z

Create initrd image with packed microcode. This'll allow to load it at early boot stage. Signed-off-by: Tomasz Maciej Nowak