staging/chunkeey/tools/firmware-utils, branch v18.06.3

tools/firmware-utils: fix sysupgrade typo in mkdapimg2

2019-01-13T09:13:18Z

Signed-off-by: Hans Dedecker

tools/firmware-utils: fix sysupgrade typo in mkdapimg

2019-01-13T09:13:07Z

Signed-off-by: Hans Dedecker

tools: tplink-safeloader: add C7v5 EU SupportList

2018-11-23T21:30:26Z

Currently flash from WebIF is broken for Archer C7 v5 EU models as their SupportList entries are missing. The added entries originate from TP-Links latest Archer C7 v5 EU firmware. Signed-off-by: David Bauer (cherry picked from commit 53020ed4b981d8d48394842d0aff1a0d0497cc1c)

ar71xx: Add support for TP-Link CPE210 v2

2018-06-23T14:08:22Z

This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Notes: TP-Link does not use bootstrap registers so without this patch reference clock detects as 40MHz while it is actually 25MHz. This is due to messed up bootstrap resistor configuration on the PCB. Provided GPL code just forces 25MHz reference clock. That causes booting with completely wrong clocks, for example, CPU tries to boot at 1040MHz while the stock is 650MHz. So this PR depends on PR #672 to remove 40MHz reference clock. Thanks to Sven Eckelmann for properly patching that. Signed-off-by: Robert Marko Signed-off-by: Adrian Schmutzler (cherry picked from commit 5c5bf8b8658a588423f6ec445d7ef6a36f99a396)

ar71xx: add support for TP-LINK Archer C7 v5

2018-06-21T05:02:51Z

TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9563+QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 10x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin and rename it to ArcherC7v5_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Arvid E. Picciani (cherry picked from commit bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd)

ipq806x: increase kernel partition size for the TP-Link Archer C2600

2018-05-24T15:24:31Z

The default image does not fit 2 MB anymore, expand os-image partition to 4 MB. Upgrading works transparently via sysupgrade in both directions. Another option would have been to merge "os-image" and "rootfs" into a single "firmware" partition using MTD_SPLIT_TPLINK_FW, but just changing the sizes of the existing partitioning has been deemed safer and actually tested on an affected device; the maximum for rootfs changes from 27 MB to 25 MB. Run-tested on TP-Link Archer C2600. Signed-off-by: Joris de Vries [slh: extend comments and commit message, rename rootfs] Signed-off-by: Stefan Lippers-Hollmann (cherry picked from commit b72b36653a3fc8347456ab9c45d26a3144688a4c)

firmware-utils: add DNS-313 image header tool

2018-05-05T04:57:00Z

This tool is used to create headers on images for the D-Link DNS-313 in gemini target. Will be used after switching gemini to 4.14 kernel. Signed-off-by: Linus Walleij

firmware-utils: tplink-safeloader: increase RE350 kernel size

2018-04-23T20:07:22Z

4.14 increased kernel size, so grow the kernel partition by 128K to compensate. Fixes FS#1479. Signed-off-by: Alex Maclean

ar71xx: increase kernel partition size for CPE/WBS 210/510

2018-04-10T16:29:19Z

Signed-off-by: Matthias Schiffer

firmware-utils: tplink-safeloader: move CPE/WBS 210/510 version metainfo to the end

2018-04-10T16:29:19Z

Having the metainfo between kernel and rootfs prevents us from resizing the kernel partition as necessary. Signed-off-by: Matthias Schiffer