staging/dangole/package, branch main

kernel: kmod-ipt-clusterip: Depend on kernel 5.15 and 6.1

2024-05-28T20:07:43Z

The kernel module was removed in kernel 6.3. https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9db5d918e2c07fa09fab18bc7addf3408da0c76f Signed-off-by: Hauke Mehrtens

kernel: kmod-can-usb-esd: Fix build on kernel 6.6

2024-05-28T20:07:43Z

The kernel module and configuration option was renamed from esd_usb2.ko to esd_usb.ko in kernel 6.0. Adapt the kernel package. https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5e910bdedc84c1f196863cebdf27c1806449c27c Signed-off-by: Hauke Mehrtens

linux-firmware: Update to version 20240513

2024-05-28T20:04:34Z

This updates the following firmware files: airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.DSP.bin airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.dm.bin amdgpu-firmware/ (Many files) ibt-firmware/lib/firmware/intel/ibt-0040-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0040-1020.sfi ibt-firmware/lib/firmware/intel/ibt-0040-1050.sfi ibt-firmware/lib/firmware/intel/ibt-0040-2120.sfi ibt-firmware/lib/firmware/intel/ibt-0040-4150.sfi ibt-firmware/lib/firmware/intel/ibt-0041-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0180-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0180-1050.sfi ibt-firmware/lib/firmware/intel/ibt-0180-4150.sfi ibt-firmware/lib/firmware/intel/ibt-0291-0291.ddc ibt-firmware/lib/firmware/intel/ibt-0291-0291.sfi ibt-firmware/lib/firmware/intel/ibt-1040-0041.sfi ibt-firmware/lib/firmware/intel/ibt-1040-1020.sfi ibt-firmware/lib/firmware/intel/ibt-1040-1050.sfi ibt-firmware/lib/firmware/intel/ibt-1040-2120.sfi ibt-firmware/lib/firmware/intel/ibt-1040-4150.sfi ibt-firmware/lib/firmware/intel/ibt-17-16-1.sfi ibt-firmware/lib/firmware/intel/ibt-17-2.sfi ibt-firmware/lib/firmware/intel/ibt-18-16-1.sfi ibt-firmware/lib/firmware/intel/ibt-18-2.sfi ibt-firmware/lib/firmware/intel/ibt-19-0-0.sfi ibt-firmware/lib/firmware/intel/ibt-19-0-1.sfi ibt-firmware/lib/firmware/intel/ibt-19-0-4.sfi ibt-firmware/lib/firmware/intel/ibt-19-16-4.sfi ibt-firmware/lib/firmware/intel/ibt-19-240-1.sfi ibt-firmware/lib/firmware/intel/ibt-19-240-4.sfi ibt-firmware/lib/firmware/intel/ibt-19-32-0.sfi ibt-firmware/lib/firmware/intel/ibt-19-32-1.sfi ibt-firmware/lib/firmware/intel/ibt-19-32-4.sfi ibt-firmware/lib/firmware/intel/ibt-20-0-3.sfi ibt-firmware/lib/firmware/intel/ibt-20-1-3.sfi ibt-firmware/lib/firmware/intel/ibt-20-1-4.sfi iwlwifi-firmware-ax200/lib/firmware/iwlwifi-cc-a0-77.ucode iwlwifi-firmware-ax201/lib/firmware/iwlwifi-QuZ-a0-hr-b0-77.ucode iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0.pnvm iwlwifi-firmware-iwl9000/lib/firmware/iwlwifi-9000-pu-b0-jf-b0-46.ucode iwlwifi-firmware-iwl9260/lib/firmware/iwlwifi-9260-th-b0-jf-b0-46.ucode mt7921bt-firmware/lib/firmware/mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin mt7922bt-firmware/lib/firmware/mediatek/BT_RAM_CODE_MT7922_1_1_hdr.bin rtl8852ce-firmware/lib/firmware/rtw89/rtw8852c_fw.bin Signed-off-by: Hauke Mehrtens

ebtables: fix compilation with GCC14

2024-05-28T08:41:45Z

Remove 100-musl_fix.patch, which is no longer needed and causes a build error with gcc-14. Fixes: useful_functions.c:63:41: error: passing argument 1 of 'ether_ntoa' from incompatible pointer type [-Wincompatible-pointer-types] 63 | printf("%s", ether_ntoa((struct ether_addr *) mac)); | ^~~~~~~~~~~~~~~~~~~~~~~~~ | | | struct ether_addr * In file included from include/ebtables_u.h:28, from useful_functions.c:25: /Volumes/wrt3200/openwrt/staging_dir/toolchain-arm_cortex-a9+vfpv3-d16_gcc-14.1.0_musl_eabi/include/netinet/ether.h:10:19: note: expected 'const struct ether_addr *' but argument is of type 'struct ether_addr *' 10 | char *ether_ntoa (const struct ether_addr *); | ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Georgi Valkov Link: https://github.com/openwrt/openwrt/pull/15576 Signed-off-by: Robert Marko

ath79: add support for Dell SonicPoint ACe APL26-0AE

2024-05-26T22:32:57Z

Dell/SonicWall APL26-0AE (marketed as SonicPoint ACe) is a dual band wireless access point. End of life as of 2022-07-31. Specification SoC: QualcommAtheros QCA9550 RAM: 256 MB DDR2 Flash: 32 MB SPI NOR WIFI: 2.4 GHz 3T3R integrated 5 GHz 3T3R QCA9890 oversized Mini PCIe card Ethernet: 2x 10/100/1000 Mbps QCA8334 port labeled lan1 is PoE capable (802.3at) USB: 1x 2.0 LEDs: LEDs: 6x which 5 are GPIO controlled and two of them are dual color Buttons: 2x GPIO controlled Serial: RJ-45 port, SonicWall pinout baud: 115200, parity: none, flow control: none Before flashing, be sure to have a copy of factory firmware, in case You wish to revert to original firmware. All described procedures were done in following environment: ROM Version: SonicROM (U-Boot) 8.0.0.0-11o SafeMode Firmware Version: SonicOS 8.0.0.0-14o Firmware Version: SonicOS 9.0.1.0 In case of other versions, following installation instructions might be ineffective. Installation 1. Prepare TFTP server with OpenWrt sysupgrade image and rename that image to "sp_fw.bin". 2. Connect to one of LAN ports. 3. Connect to serial port. 4. Hold the reset button (small through hole on side of the unit), power on the device and when prompted to stop autoboot, hit any key. The held button can now be released. 5. Alter U-Boot environment with following commands: setenv bootcmd bootm 0x9F110000 saveenv 6. Adjust "ipaddr" (access point, default is 192.168.1.1) and "serverip" (TFTP server, default is 192.168.1.10) addresses in U-Boot environment, then run following commands: tftp 0x80060000 sp_fw.bin erase 0x9F110000 +0x1EF0000 cp.b 0x80060000 0x9F110000 $filesize 7. After successful flashing, execute: boot 8. The access point will boot to OpenWrt. Wait few minutes, until the wrench LED will stop blinking, then it's ready for configuration. Known issues Initramfs image can't be bigger than specified kernel size, otherwise bootloader will throw LZMA decompressing error. Switching to lzma-loader should workaround that. This device has Winbond 25Q256FVFG and doesn't have reliable reset, which causes hang on reboot, thus broken-flash-reset needs to be added. This property addition causes dispaly of "scary" warning on each boot, take this warnig into consideration. Signed-off-by: Tomasz Maciej Nowak

kernel/modules/other/mlxreg: add new package

2024-05-25T18:36:32Z

This commit adds a new mlxreg package, which allows access to Mellanox programmable device register space through sysfs interface for thermal control and hardware management. It also adds required Mellanox I²C drivers and packages for the "special" MSN4800 series and SN2201 platform. Signed-off-by: Til Kaiser

kernel/modules/other/mlx_wdt: add new package

2024-05-25T18:36:32Z

This commit adds a new driver for the hardware watchdog on Mellanox systems. Signed-off-by: Til Kaiser

tfa-layerscape: Bump to lf-6.6.3-1.0.0

2024-05-25T18:18:23Z

This commit bumps tfa-layerscape package to version lf-6.6.3-1.0.0 Manually rebased: 001-fiptool-hostbuild-fixes.patch 004-plat-nxp-restore-ls1012afrdm-support.patch Signed-off-by: Pawel Dembicki

uboot-layerscape: bump to lf-6.6.3-1.0.0

2024-05-25T18:18:23Z

This commit bumps u-boot layerscape package to lf-6.6.3-1.0.0 version. Removed upstreamed: 0001-board-ls1046ardb-force-PCI-device-enumeration.patch 0002-board-ls1043ardb-force-PCI-device-enumeration.patch Manually rebased: 0900-layerscape-adjust-LS1021A-IOT-config-for-OpenWrt.patch Signed-off-by: Pawel Dembicki

ppfe-firmware: Bump to lf-6.6.3-1.0.0

2024-05-25T18:18:23Z

Bump ppfe-firmware package to lf-6.6.3-1.0.0 Signed-off-by: Pawel Dembicki