staging/jow/package/boot, branch main

uboot-envtools: ipq807x: remove number of blocks and code simplification

2025-01-15T10:25:01Z

Envtools can automatically detect the number of blocks. Signed-off-by: Paweł Owoc Link: https://github.com/openwrt/openwrt/pull/17463 Signed-off-by: Robert Marko

qualcommax: ipq807x: add support for Linksys HomeWRK

2025-01-15T10:25:01Z

uboot-envtools: update to v2025.01

2025-01-12T19:16:14Z

Update to latest version. There are no patches that need to be refreshed. Signed-off-by: Shiji Yang Link: https://github.com/openwrt/openwrt/pull/17538 Signed-off-by: Hauke Mehrtens

qualcommax: ipq60xx: add TP-Link EAP610-Outdoor support

2025-01-12T15:54:51Z

TP-Link EAP610-Outdoor is a 802.11ax AP claiming AX1800 support. It is wall or pole mountable, and rated for outdoor use. It can only be powered via PoE. Specifications: --------------- * CPU: Qualcomm IPQ6018 Quad core Cortex-A53 * RAM: 512 MB * Storage: ESMT PSR1GA30DT 128MB NAND * Ethernet: * Gigabit RJ45 port with PoE input * WLAN: * 2.4GHz/5GHz * LEDs: * Multi-color System LED (Green/Amber) * Buttons: * 1x Reset * UART: 4-pin unpopulated header * 1.8 V level, Pinout 1 - TX, 2 - RX, 3 - GND, 4 - 1.8V Installation: ============= Web UI method ------------- Set up the device using the vendor's web UI. After that go to Management->SSH and enable the "SSH Login" checkbox. Select "Save". The connect to the machine via SSH: ssh -o hostkeyalgorithms=ssh-rsa Disable signature verification: cliclientd stopcs Rename the "-web-ui-factory" image to something less than 63 characters, maintaining the ".bin" suffix. * Go to System -> Firmware Update. * Under "New Firmware File", click "Browse" and select the image * Select "Update" and confirm by clicking "OK". If the update fails, the web UI should show an error message. Otherwise, the device should reboot into OpenWRT. TFTP method ----------- To flash via tftp, first place the initramfs image on the TFTP server. setenv serverip setenv ipaddr tftpboot tplink_eap610-outdoor-initramfs-uImage.itb bootm This should boot OpenWRT. Once booted, flash the sysupgrade.bin image using either luci or the commandline. The tplink2022 image format ============================ The vendor images of this device are packaged in a format that does not match any previous tplink formats. In order for flashing to work from the vendor's web UI, firmware updates need to be packaged in this format. The `tplink-mkimage-2022.py` is provided for this purpose. This script can also analyze vendor images, and extract the required "support" string. This string is checked by the vendor firmware, and images with a missing or incorrect string are rejected. Signed-off-by: Alexandru Gagniuc Link: https://github.com/openwrt/openwrt/pull/14922 Signed-off-by: Robert Marko

uboot-rockchip: Fix product name for Radxa ROCK Pi 4

2025-01-10T12:47:47Z

"ROCK" is the correct series name. https://radxa.com/products/rock4 Signed-off-by: FUKAUMI Naoki Link: https://github.com/openwrt/openwrt/pull/17532 Signed-off-by: Robert Marko

uboot-envtools: ipq60xx: remove number of blocks

2025-01-06T20:24:44Z

It is not required to specify the number of blocks as envtools are able to autodetect it. Link: https://github.com/openwrt/openwrt/pull/17504 Signed-off-by: Robert Marko

uboot-mediatek: add missing LED command for OpenWrt One

2025-01-04T13:08:05Z

The u-boot LED command "led_loop_done" is missing from the OpenWrt One NAND flash u-boot. Copy it from the OpenWrt One NOR flash u-boot default environment to fix this issue. Fixes: https://github.com/openwrt/openwrt/issues/17310 Signed-off-by: Shiji Yang Link: https://github.com/openwrt/openwrt/pull/17338 Signed-off-by: Hauke Mehrtens

uboot-mediatek: fix Routerich AX3000 support patch

2025-01-04T13:08:05Z

It seems that the original patch has been manually modified. The newly added line number is incorrect. Fixes: c0581520b1c5 ("uboot-mediatek: add Routerich AX3000 support") Signed-off-by: Shiji Yang Link: https://github.com/openwrt/openwrt/pull/17338 Signed-off-by: Hauke Mehrtens

qualcommax: ipq807x: add support for Linksys MX4300 (LN1301)

2024-12-31T16:44:10Z

Hardware specification: ======== SoC: Qualcomm IPQ8174 Flash: 1GB (Micron MT29F8G08ABBCAH4 or AMD/Spansion S34MS08G2) RAM: 2GB (2x Kingston B5116ECMDXGJD or ESMT M15T2G16128A DDR3L) Ethernet: 4x 10/100/1000Mbps (Qualcomm QCA8075) WiFi1: 5GHz ax 2x2 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-64 (low band) WiFi2: 2.4GHz ax 2x2 (Qualcomm QCN5024 + Skyworks SKY85340-11) WiFi3: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 100-177 (high band) LED: 1x RGB status (NXP PCA9633) USB: 1x USB 3.0 Button: WPS, Reset Flash instructions: ======== 1. Manually upgrade firmware using openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin image. More details can be found here: https://support.linksys.com/kb/article/6564-en/ After first boot check actual partition: - fw_printenv -n boot_part and install firmware on second partition using command in case of 2: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin kernel and in case of 1: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin alt_kernel 2. Installation using serial connection from OEM firmware (default login: root, password: admin): - fw_printenv -n boot_part In case of 2: - flash_erase /dev/mtd21 0 0 - nandwrite -p /dev/mtd21 openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin or in case of 1: - flash_erase /dev/mtd23 0 0 - nandwrite -p /dev/mtd23 openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin After first boot install firmware on second partition: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin kernel or: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin alt_kernel 3. Installation from initramfs image using USB drive: Put the initramfs image on the USB drive: - dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_mx4300-initramfs-uImage.itb of=/dev/sdX Stop u-boot and run: - usb start && usbboot $loadaddr 0 && bootm $loadaddr Write firmware to the flash from initramfs: - mtd -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin kernel and: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4300-squashfs-factory.bin alt_kernel 4. Back to the OEM firmware: - mtd -e kernel -n write FW_MX4300_1.0.4.215382_prod.img kernel and: - mtd -r -e alt_kernel -n write FW_MX4300_1.0.4.215382_prod.img alt_kernel 5. USB recovery: Put the initramfs image on the USB: - dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_mx4300-initramfs-uImage.itb of=/dev/sdX Set u-boot env: - fw_setenv bootusb 'usb start && usbboot $loadaddr 0 && bootm $loadaddr' - fw_setenv bootcmd 'run bootusb; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi' Co-authored-by: Qiyuan Zhang Signed-off-by: Paweł Owoc Link: https://github.com/openwrt/openwrt/pull/16070 Signed-off-by: Robert Marko

trusted-firmware-a.mk: fix release download URL

2024-12-28T10:20:20Z

The URL of trusted-firmware-a is no longer available for downloading release: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/ curl: (22) The requested URL returned error: 401 Unauthorized So we switch to the GitHub mirror repository to download. Signed-off-by: Chukun Pan Link: https://github.com/openwrt/openwrt/pull/17360 Signed-off-by: Robert Marko