staging/jow/target, branch main

generic: fix probe issues with RealTek RTL8221B PHYs

2025-01-26T00:17:11Z

Import patch "net: phy: realtek: mark existing MMDs as present" When using Clause-45 mode to access RealTek RTL8221B 2.5G PHYs some versions of the PHY fail to report the MMDs present on the PHY. Mark MMDs PMAPMD, PCS and AN which are always existing according to the datasheet as present to fix that. Fixes: #16823, #17183, #17232 Signed-off-by: Daniel Golle Tested-by: Aleksander Jan Bajkowski Tested-by: Juan Pedro Paredes Caballero

qualcommbe: ipq95xx: Set target as source-only

2025-01-25T20:24:09Z

Set target as source-only for now as only the Reference Board is supported and needs to better evaluated with real Devices. Link: https://github.com/openwrt/openwrt/pull/17725 Signed-off-by: Christian Marangi

qualcommbe: ipq95xx: Enable Aquantia PHY by default

2025-01-25T20:24:09Z

Enable the Aquantia PHY by default in config-defaults. Target is big enough to permit embedding the PHY instead of having as an external module. Link: https://github.com/openwrt/openwrt/pull/17725 Signed-off-by: Christian Marangi

qualcommbe: ipq95xx: Update patch with upstream version and refresh

2025-01-25T20:24:08Z

Update patch with upstream version and automatically refresh with make target/linux/refresh. Also backport one additional fix patch for NAND patch and drop a patch merged upstream. Link: https://github.com/openwrt/openwrt/pull/17725 Signed-off-by: Christian Marangi

qualcommbe: ipq95xx: Add patch fixing unmet dependency for QCOM PPE

2025-01-25T20:24:08Z

Add patch fixing unmet dependency for QCOM PPE. This fix a compilation error when SFP config is selected. Link: https://github.com/openwrt/openwrt/pull/17725 Signed-off-by: Christian Marangi

qualcommbe: ipq95xx: Add patch adding partition table common to RDP

2025-01-25T20:24:08Z

Add patches adding partition table common to RDP board and node for AQR NVMEM. Link: https://github.com/openwrt/openwrt/pull/17725 Signed-off-by: Christian Marangi

qualcommbe: ipq95xx: Add patch fixing USB regulator

2025-01-25T20:24:07Z

Add patch fixing USB regulator as the LDO needs to use ID 5 instead of ID 2. Link: https://github.com/openwrt/openwrt/pull/17725 Signed-off-by: Christian Marangi

qualcommbe: ipq95xx: Backport cpufreq patch and enable RPM

2025-01-25T20:24:07Z

Backport CPUFreq patch and enable RPM. This is to enable CPU Frequency scaling and regulators. Link: https://github.com/openwrt/openwrt/pull/17725 Signed-off-by: Christian Marangi

qualcommbe: ipq95xx: Add initial support for new target

2025-01-25T20:24:06Z

Add initial support for new target with the initial patch for ethernet support using pending upstream patches for PCS UNIPHY, PPE and EDMA. Only initramfs currently working as support for new SPI/NAND implementation, USB, CPUFreq and other devices is still unfinished and needs to be evaluated. Link: https://github.com/openwrt/openwrt/pull/17725 Signed-off-by: Christian Marangi

realtek: Split Zyxel GS1900-8 into v1 and v2

2025-01-25T14:07:13Z

Zyxel GS1900-8 v2 devices have been produced more recently than v1 devices. As there are v1 boards with RTL8380M rev. C SoCs, it can likely safely be assumed that all v2 devices will also have a recent SoC revision, supporting the hardware auxiliary MDIO controller. Make the GS1900-8 v1 use an emulated auxiliary MDIO bus, for backward compatibility with devices containing an RTL8380M rev. A. Since the devicetrees are otherwise identical, GS1900-8 v1 devices with an RTL8380M rev. B or C will also be able to use the (more efficient) v2 image. This includes any currently functioning device with OpenWrt, so include the old compatible as a supported device for the GS1900-8 v2. Link: https://github.com/openwrt/openwrt/issues/9534 Signed-off-by: Sander Vanheule