staging/linusw, branch master

wifi-scripts: fix ieee80211w override for psk-sae/sae-mixed

2026-01-31T17:00:50Z

The ucode wifi-scripts unconditionally set ieee80211w=1 for psk-sae and eap-eap2 auth types, ignoring any user-configured value. This caused ieee80211w=2 (MFP required) to be silently downgraded to 1 (MFP optional) when using sae-mixed encryption. Change the logic to only set the default of 1 when ieee80211w is not already configured by the user. Fixes: https://github.com/openwrt/openwrt/issues/21751 Signed-off-by: Felix Fietkau

uclient: update to Git HEAD (2026-01-31)

2026-01-31T14:03:33Z

b3ee1209a3d0 uclient-http: reset fd to -1 after close in disconnect 9c2ad269c42b uclient-http: fix seq field check to use correct field 80c9bd29c233 uclient-http: fix hang on HTTP to HTTPS redirect 931bbfeb2c92 ucode: fix memory leak when using ssl context Fixes: https://github.com/openwrt/uclient/issues/11 Fixes: https://github.com/openwrt/uclient/issues/13 Signed-off-by: Felix Fietkau

lantiq: xrx200: add env-size for P-2812HNU-F1 u-boot-env

2026-01-31T10:20:23Z

The u-boot-env partition on the Zyxel P-2812HNU-F1 is 128 KiB but the actual environment data is only 8 KiB (0x2000 bytes). Without the env-size property, the u-boot,env nvmem layout driver assumes env-size equals the full partition size and computes an incorrect CRC32 over the entire 128 KiB, causing all nvmem cell reads to fail silently. Add env-size = <0x2000> so the CRC32 is computed over the correct 8 KiB region, allowing nvmem-cells (such as ethaddr) to be read properly by the kernel. Signed-off-by: Burak Aydos Link: https://github.com/openwrt/openwrt/pull/21780 Signed-off-by: Robert Marko

realtek: mdio: convert rtl838x i/o to regmap

2026-01-31T10:19:14Z

Drop legacy sw_xxx() macros for rtl838x devices. While we are here reorganize the access and aovid masked access where possible. So the code is easier to read. Signed-off-by: Markus Stockhausen Link: https://github.com/openwrt/openwrt/pull/21741 Signed-off-by: Robert Marko

realtek: mdio switch run command to regmap

2026-01-31T10:19:14Z

As a first step convert the central run command over to regmap. Additional info: The command masks where changed because sw_xxx() dont care about the to be set or to be cleared bits (aka mask). In regmap the mask must always be a superset of the to be set bits. Signed-off-by: Markus Stockhausen Link: https://github.com/openwrt/openwrt/pull/21741 Signed-off-by: Robert Marko

realtek: mdio: adapt command function signature

2026-01-31T10:19:14Z

To make use of regmap in the command function adapt its signature so it has access to the control structure via the bus. Signed-off-by: Markus Stockhausen Link: https://github.com/openwrt/openwrt/pull/21741 Signed-off-by: Robert Marko

realtek: mdio: enhance read/write function signature

2026-01-31T10:19:14Z

For regmap conversion the read/write functions need access to the control structure (aka bus->priv). Add the bus to the parameters list. Signed-off-by: Markus Stockhausen Link: https://github.com/openwrt/openwrt/pull/21741 Signed-off-by: Robert Marko

realtek: mdio: add regmap to bus structure

2026-01-31T10:19:14Z

To convert the existing sw_xxx() commands the bus needs a regmap. This is derived from the parent mfd node like in all other Realtek drivers. Signed-off-by: Markus Stockhausen Link: https://github.com/openwrt/openwrt/pull/21741 Signed-off-by: Robert Marko

realtek: dts: add LGS328C port 21 definition

2026-01-31T10:18:02Z

Port 21 definition was missed during addition of LGS328C. Add it to the dts. Fixes: 853d73f ("realtek: add support for Linksys LGS328C") Signed-off-by: Markus Stockhausen Link: https://github.com/openwrt/openwrt/pull/21793 Signed-off-by: Robert Marko

uboot-mvebu: update to version 2026.01

2026-01-30T18:07:41Z

Update package to the latest stable version. Patches unchanged. Signed-off-by: Stefan Kalscheuer Link: https://github.com/openwrt/openwrt/pull/21673 Signed-off-by: Hauke Mehrtens