lynxis staging tree https://git.openwrt.org/openwrt/staging/lynxis/atom?h=reboot 2016-04-21T19:47:15Z 2016-04-21T19:47:15Z John Crispin 2016-04-21T19:47:15Z urn:sha1:d35801b9c5fdd409bdfe600d132ab8340da88802 Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49215 2016-04-21T19:47:12Z John Crispin 2016-04-21T19:47:12Z urn:sha1:51b6448746f15d4ffccad79344fd4daf85a9a5c6 Remove the whole board list from mktplinkfw, as OpenWrt doesn't use it and it was severely out of sync with the list of built images for ar71xx. Also: * fix -Wall warnings * add const where appropriate Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49214 2016-04-09T10:26:46Z John Crispin 2016-04-09T10:26:46Z urn:sha1:5f1a82ec4ffebc668a739d2a2fb72da8dbbeaaa5 Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> SVN-Revision: 49158 2016-03-16T09:26:58Z John Crispin 2016-03-16T09:26:58Z urn:sha1:3fd98db8185a2636b90c7d41452e98fc8583a4e7 This patch adds support for the OMYlink OMY-X1 https://wiki.openwrt.org/toh/omylink/omy-x1 http://www.omylink.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 49026 2016-03-04T08:32:54Z John Crispin 2016-03-04T08:32:54Z urn:sha1:4d97c8bab03442b9c5ffa19b550575478bbd4f50 replace spaces with tabs Signed-off-by: Reinhard Max <reinhard@m4x.de> SVN-Revision: 48901 2016-03-03T20:24:30Z John Crispin 2016-03-03T20:24:30Z urn:sha1:678dcef7a5f75303ea801bc23be854fd7bb619c0 This tool creates factory images for JCG routers. Details can be found in the header comment of jcgimage.c. Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48888 2016-02-29T20:11:33Z Felix Fietkau 2016-02-29T20:11:33Z urn:sha1:076d58d3440f382c536ea8874f58b0df23c263bc The new u-boot version bundled with the 5.6.x firmwares from Ubiquiti gets confused by the smaller rootfs partition size; this can lead to various issues: 1. We've gotten reports that flashing from the 5.6.x stock firmware to OpenWrt will brick devices; I wasn't able to reproduce this myself 2. Flashing from 5.5.x stock firmware to OpenWrt and back to stock (via TFTP recovery), following by an update to 5.6.x via web interface can yield a bricked device with the following properties: - It can't be booted without entering commands over a serial console, as u-boot supplies the wrong MTD layout - The web interface won't accept any image with the original flash layout, so stock firmware upgrades are impossible - As the TFTP recovery doesn't update u-boot, returning to the old u-boot from firmware 5.5.x is impossible To recover from 2., creating an OpenWrt image which doesn't set u-boot as read-only and flashing a backup of the old u-boot from there is the only way known to me. (Fixing the mtdparts variable in u-boot-env from OpenWrt might also work; settings this from u-boot over serial didn't have any permanent effect.) Fix all of this by setting the correct flash layout also used by the stock firmware. Flashing has been tested from both firmware 5.5.x and 5.6.x. The fixed layout also matches the mtdparts defined by OpenWrt. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48829 2016-02-29T20:11:30Z Felix Fietkau 2016-02-29T20:11:30Z urn:sha1:619a58d641cd763c00be42d5c99c6a72074e845c The ubdev01 profile defines its own MTDPARTS with smaller firmware partition, so give it its own UBNT_BOARD in mkfwimage. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48828 2016-02-29T20:11:26Z Felix Fietkau 2016-02-29T20:11:26Z urn:sha1:bd93998df6b57a1a99cd919db37ebc24deac47b2 Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48827 2016-02-12T08:30:28Z John Crispin 2016-02-12T08:30:28Z urn:sha1:d6cb792d21273c7aa101dbfa1072534f35cabf96 Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> SVN-Revision: 48705