Staging tree of Piotr Dymacz https://git.openwrt.org/openwrt/staging/pepe2k/atom?h=v21.02.2 2022-02-17T18:00:30Z 2022-02-17T18:00:30Z Hauke Mehrtens 2022-02-17T18:00:30Z urn:sha1:30e2782e0647a837044ada77ce86b29c5af8a9f2 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2022-02-12T18:41:39Z Hauke Mehrtens 2022-02-12T16:01:04Z urn:sha1:c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between 5.4.171 and 5.4.179. The following 3 patches do not apply any more: * target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch This was already integrated in kernel v5.4-rc1, it was never needed. * target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch * target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch I think these were done to fix the problem which was really fixed in commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio hogs") from v5.4.175 target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch Move fwnode_device_is_available to the same position as in kernel 5.10. target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus") Compile-tested: lantiq/xrx200, bcm27xx/bcm2710 Run-tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2022-01-13T19:30:59Z David Bauer 2022-01-13T09:06:20Z urn:sha1:43d105ec2aa2ee35c9687eab965ac8006e6484ce Compile-tested: ath79-generic ipq40xx-generic Run-tested: ath79-generic Signed-off-by: David Bauer <mail@david-bauer.net> 2021-12-28T18:09:17Z Hauke Mehrtens 2021-12-27T20:59:44Z urn:sha1:32c74552b2310531af593ee0f859a3935a3a7cbd All updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2021-12-12T19:08:17Z Hauke Mehrtens 2021-12-05T16:43:36Z urn:sha1:14940aee4566cff33fff9e068fb9559a1925cf44 Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2021-11-07T00:10:53Z Hauke Mehrtens 2021-11-06T19:29:39Z urn:sha1:0b7311300b01d9975e9996327ee469e4f66fb2ec Removed upstreamed: generic/backport-5.4/790-v5.7-net-switchdev-do-not-propagate-bridge-updates-across.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2021-10-25T19:45:09Z Hauke Mehrtens 2021-10-25T19:45:09Z urn:sha1:a77ea2f05f05b134ae52c55674efac5231018691 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2021-10-25T19:44:54Z Hauke Mehrtens 2021-10-25T19:44:54Z urn:sha1:b4d7885af70a42df7577157b96f941500bd17bfb Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2021-10-19T22:37:51Z Hauke Mehrtens 2021-10-19T22:35:22Z urn:sha1:b4ed8a92751fdcb681117a2cb586054af106c69e Removed upstreamed: generic/backport-5.4/070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2021-10-13T05:19:30Z Paul Spooren 2021-10-10T09:09:46Z urn:sha1:f1f304940b72def82dc22cebd78436505f2d6b9f While the binary `python3.10` is correctly detected by the build system the default `python3` binary is currently not detected if pointing to a Python 3.10 installation. Fix this by extending the grep regex. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 56ea2bf2eec431ccd3c566190a444ad63db39b65)