staging/pepe2k/package/boot, branch v22.03.2

uboot-mvebu: backport LibreSSL patches for older version of LibreSSL

2022-10-03T17:51:50Z

If you would like to compile the newest version of U-boot together with the stable OpenWrt version, which does not have LibreSSL >= 3.5, which was updated in the master branch by commit 5451b03b7ceb2315445c683fe174e28bbdd49c2f ("tools/libressl: bump to v3.5.3"), then you need these two patches to fix it. They are backported from U-boot repository. This should be backported to stable OpenWrt versions. Reported-by: Michal Vasilek Signed-off-by: Josef Schlehofer (cherry picked from commit 185541f50ff59c0a5e0663ad612f0f5eb31926cf)

uboot-mvebu: backport patch to fix compilation on non glibc system

2022-10-03T17:51:50Z

This issue was reported by @paper42, who is using Void Linux with musl to compile OpenWrt and its packages and found out it is not possible to compile U-boot for Turris Omnia (neither any other). It fixes following output: ``` HOSTCC tools/kwboot tools/kwboot.c: In function 'kwboot_tty_change_baudrate': tools/kwboot.c:662:6: error: 'struct termios' has no member named 'c_ospeed' 662 | tio.c_ospeed = tio.c_ispeed = baudrate; | ^ tools/kwboot.c:662:21: error: 'struct termios' has no member named 'c_ispeed' 662 | tio.c_ospeed = tio.c_ispeed = baudrate; | ^ tools/kwboot.c:690:31: error: 'struct termios' has no member named 'c_ospeed' 690 | if (!_is_within_tolerance(tio.c_ospeed, baudrate, 3)) | ^ tools/kwboot.c:693:31: error: 'struct termios' has no member named 'c_ispeed' 693 | if (!_is_within_tolerance(tio.c_ispeed, baudrate, 3)) | ``` Tested-by: Michal Vasilek Signed-off-by: Josef Schlehofer (cherry picked from commit 9c7472950b01c5b3a461f4e29b3b62bac9e35b46)

ramips: fix fw_setsys

2022-09-23T15:03:10Z

This change was included in the original pull request but later omitted for some reason: https://github.com/openwrt/openwrt/pull/4936 Signed-off-by: Wenli Looi (cherry picked from commit 4cccea02a60aee0dd77c4db35672c92e2fe384a1)

uboot-mediatek: mt7622: suppress unwanted pinctrl warning

2022-09-03T02:55:34Z

Import patch which removes the default pinctrl of uart0 to suppress the unwanted warning. Apply also to downstream boards. Signed-off-by: Daniel Golle

uboot-mediatek: backport fix for unstable UART on MT7622

2022-09-03T01:03:42Z

Import pending patch "arm: dts: mt7622: force high-speed mode for uart" from Weijie Gao fixing the UART problems on MT7622 which made it hard to use the U-Boot menu on devices with this SoC. This patch is also contained in commit c09eb08dad ("uboot-mediatek: add support for MT798x platforms") in the development branch. Signed-off-by: Daniel Golle

uboot-mediatek: no compression means IH_COMP_NONE

2022-09-03T01:00:16Z

Treat missing compression node in FIT image as IH_COMP_NONE. This is implicentely already happening in most places, but for now was still triggering an annoying warning about initramfs compression being obsolete despite compression note being absent. Fix this. Signed-off-by: Daniel Golle (cherry picked from commit 0a18456ffc25d6a26911fca6f9079090243c2284)

uboot-mediatek: fix factory reset on UBI

2022-09-03T01:00:16Z

Truncating a UBI volume using `ubi write 0x0 volname 0x0` results in segfault on newer U-Boot. Write 1MB of 0s instead. Signed-off-by: Daniel Golle (cherry picked from commit d118cbdfece181994a96d1bcb1868bd807d481bf)

uboot-envtools: mt7622: use 4k sectors for UniFi 6 LR (ubootmod)

2022-09-03T01:00:16Z

Use 4k sectors when accessing the U-Boot environment on the 64MiB SPI-NOR flash chip found in the UniFi 6 LR. The speeds up environment write access as only 4kB instead of 64kB have to be written. Signed-off-by: Daniel Golle (cherry picked from commit f0adf253fdcf78ce005dad9652b405a4ad2726e6)

uboot-mediatek: fix Ubiquiti UniFi 6 LR U-Boot mod

2022-09-03T01:00:16Z

Image names as well as the calculation of the padded image size did not work as intended. Fix that. Signed-off-by: Daniel Golle (cherry picked from commit 0bc8889e7b4f19d7e33a9be6c3db918fed051501)

at91bootstrap: use sdmmc0 as booting media for sama5d27_som1_ek

2022-09-02T19:42:50Z

Commit 0b7c66c ("at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig") changed default booting media for sama5d27_som1_ek board w/o any reason. Changed it back to sdmmc0 as it is for all the other Microchip supported distributions for this board (Buildroot, Yocto Project). The initial commit cannot be cleanly reverted. Signed-off-by: Claudiu Beznea (cherry picked from commit e9f12931e60ee291cd7d2c8fd19a14682dae0197)