staging/pepe2k/package/kernel, branch v19.07.0

mt76: update to the latest openwrt-19.07 version

2020-01-04T21:02:22Z

8a78567 mt76: fix compilation warning in mt76_eeprom_override() Signed-off-by: David Bauer

mt76: fix incorrect firmware path

2020-01-04T11:40:04Z

The mt76 driver does load the firmware for the MT7615 chip from /lib/firmware/mediatek instead of /lib/firmware. The driver loads the firmware from this path since mt76 commit ea3ab68c7589 ("mt76: mt7615: fix mt7615 firmware path definitions"). Fixes: a2e2c40b5ebd ("mt76: update to the latest openwrt-19.07 version") Reported-by: Stijn Segers Signed-off-by: David Bauer Tested-by: Stijn Segers

mt76: update to the latest openwrt-19.07 version

2020-01-03T16:52:35Z

330e832 mt76: mt76x0: fix default mac address overwrite f97c33e mt76: mt7603: fix input validation issues for powersave-filtered frames 875f6d7 mt76: mt7615: increase MCU command timeout abd7d86 mt76: clear skb pointers from rx aggregation reorder buffer during cleanup 96c7b07 mt76: eeprom: add support for big endian eeprom partition 19c8e20 mt76: fix possible undetected invalid MAC address df64c56 mt76: Off by one in mt76_calc_rx_airtime() 1702b24 mt76: mt7603: reset STA_CCA counter setting the channel 383a631 mt76: mt76x0u: do not reset radio on resume 2dcfbdd mt76: disable bh in mt76_dma_rx_poll 947d20d mt76: fix rx dma ring descriptor state on reset f3348f5 mt7615: replace sta_state callback with sta_add/sta_remove faf5e6f mt76: mt7615: read {tx,rx} mask from eeprom db78ee0 mt76: move mt76_get_antenna in mt76_core module 7121e16 mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs 5dfb0ec mt76: mt7615: disable radar pattern detector during scanning e2f90ad mt76: move interface_modes definition in mt76_core module cfdb751 mt76: mt7615: add ibss support e0731a8 mt76: move SUPPORTS_REORDERING_BUFFER hw property in mt76_register_device a85c06c mt76: use mt76_dev in mt76_is_{mmio,usb} ea19cd7 mt76: Remove set but not used variable 'idx' 3cbaf81 mt76: mt76u: rely on a dedicated stats workqueue 20f0589 mt76: mt76u: rely on usb_interface instead of usb_dev f2be00b mt76: dma: fix buffer unmap with non-linear skbs c14d656 mt76: mt76x2e: disable pcie_aspm by default 58e1e96 mt76: mt7615: remove unneeded semicolon c93a2d1 mt76: mt76x02u: update ewma pkt len in mt76x02u_tx_prepare_skb 1987b74 mt76: mt76x0: remove 350ms delay in mt76x0_phy_calibrate 50b1e9b mt76: refactor cc_lock locking scheme d868638 mt76: remove obsolete .add_buf() from struct mt76_queue_ops dc14ac6 mt7615: remove vif sta from poll list on interface remove 2a0a191 mt7603: remove vif sta from poll list on interface remove d3a5895 mt76: fix a-mpdu boundary detection issue for airtime reporting 391e148 mt76: add sanity check for a-mpdu rx wcid index 01642d8 mt76: mt76x02: fix use-after-free in tx status code handling airtime c11a4ad mt76: mt76x0: eeprom: add support for MAC address from OF d94cc81 mt76: drop rcu read lock in mt76_rx_aggr_stop 7d8764d mt76: avoid enabling interrupt if NAPI poll is still pending 5b02a07 mt76: add missing locking around ampdu action 71c2ef0 mt76: fix aggregation stop issue 6f7d0f5 mt76: fix use-after-free bug in airtime fairness code 8f22de0 mt76: do not use devm API for led classdev e7199f9 mt76: enable airtime fairness 81f2be0 mt76: mt7615: track tx/rx airtime for airtime fairness 2579122 mt76: mt7615: introduce mt7615_mac_wtbl_update routine d91f7c1 mt76: mt7615: fix survey channel busy time 028071d mt76: mt7615: report tx_time, bss_rx and busy time to mac80211 0e5050e mt76: mt76x02: track approximate tx airtime for airtime fairness and survey 3429cc7 mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_reset de118bb mt76: unify channel survey update code fdf0163 mt76: mt7603: switch to a different counter for survey busy time ee31030 mt76: mt7603: track tx airtime for airtime fairness and survey f34b1ae mt76: track rx airtime for airtime fairness and survey a1d6891 mt76: store current channel survey_state in struct mt76_dev b042987 mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4 2027763 mt76: report rx a-mpdu subframe status 1ddcadb mt76: mt7603: remove q_rx field from struct mt7603_dev ea3ab68 mt76: mt7615: fix mt7615 firmware path definitions 081926a mt76: mt7603: collect aggregation stats 696c0fc mt76: mt7615: collect aggregation stats 23e8aed mt76: move aggr_stats array in mt76_dev 1118b5e mt76: mt7615: add queue entry in debugfs fbc59e6 mt76: move queue debugfs entry to driver specific code 0b01ace mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb module c394887 mt76: mt76x0u: reset counter starting the device 0355b7a mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_start f3792b5 mt76: mt76x02: move mac_reset_counter in mt76x02_lib module 63e8152 mt76: mt7615: enable SCS by default b140512 mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smaller a20c20b mt76: usb: add lockdep_assert_held in __mt76u_vendor_request 0308d75 mt76: remove empty flag in mt76_txq_schedule_list 0efbc5d mt76: use cancel_delayed_work_sync in mt76_rx_aggr_shutdown 9c5df3c mt76: remove aggr_work field from struct mt76_wcid 8739f87 mt76: mt7615: fix control frame rx in monitor mode e07407a mt7603: fix build with CONFIG_KERNEL_DYNAMIC_DEBUG=y c7f8214 mt76: mt7615: add support to read temperature from mcu 6797378 mt76: mt7615: introduce mt7615_txwi_to_txp utility routine 496c78e mt76: mt76x0: remove unneeded return value on set channel 1d2acd5 mt76: mt76x0: remove redundant chandef copy 0167bfa mt76: make mt76_rx_convert static Signed-off-by: David Bauer

rt2x00: add throughput LED trigger

2019-12-30T14:17:32Z

This adds a (currently missing) throughput LED trigger for the rt2x00 driver. Previously, LED triggers had to be assigned to the netdev, which was limited to a single VAP. Signed-off-by: David Bauer Tested-by: Christoph Krapp (cherry picked from commit 985ec835aea100e9245baaef8ebb15628601fe5e)

mac80211: fix build without CONFIG_PCI

2019-12-29T08:08:09Z

Signed-off-by: Felix Fietkau (cherry-picked from commit fa37dbbc43db23a0ce7256f47943f38a1dcc9027)

mac80211: add patch to include local BSS rx time in survey information

2019-12-28T20:11:02Z

Signed-off-by: Felix Fietkau (cherry-picked from commit 6a3739dc42c1d9626e5784d9316c56962bd8f016)

mac80211: add pcie apsm backport changes

2019-12-28T19:40:58Z

Required for newer versions of mt76 Signed-off-by: Felix Fietkau (cherry-picked from commit d64daf7026ce47788f12130462a3107bdab8718f)

kernel: ath10k-ct: provide a build variant for small RAM devices

2019-12-24T00:03:47Z

According to many bugreports [0][1][2] the default ath10k-ct kernel module is unusable on devices with just 64 MiB RAM or with 128 MiB and dual ath10k cards. The target boards boot but eventually oom-killer starts to interfere with normal operation, so the current state is effectively broken. Since the two patches in question have a performance impact (and possibly some other unexpected side-effects) a dedicated build variant is added so that users of the low RAM devices can still benefit from all the ath10k-ct advantages. According to testing [3] results, the issue can be experienced even with "a 256MB device with three radios". Measured performance impact of implementing small buffers was lowering "the maximum 5 GHz throughput on an IPQ40xx device without RPS/XPS optimizations from 494/432 Mbit/s for TCP transfers (download/upload) to 438/343 Mbit/s" The patches were apparently inspired by QSDK tweaks used by ODMs for the affected devices. [0] http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020573.html [1] https://github.com/openwrt/openwrt/pull/1077 [2] https://bugs.openwrt.org/index.php?do=details&task_id=2664 [3] https://github.com/freifunk-gluon/gluon/pull/1440#issue-195607701 Signed-off-by: Paul Fertser [Remove double CONFIG_ATH10K-CT_LEDS entry] Signed-off-by: Hauke Mehrtens (cherry picked from commit 1ac627024de916eb157659caf49f93fa89d3b19a)

kernel: remove LINUX_4_9 dependency of kmod-dax

2019-12-22T23:32:12Z

This patch resolves recursive dependency warning on a feed package: $ make defconfig Collecting package info: done tmp/.config-package.in:104721:error: recursive dependency detected! For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" tmp/.config-package.in:104721:symbol PACKAGE_nfs-kernel-server depends on NFS_KERNEL_SERVER_V4 For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" feeds/packages/net/nfs-kernel-server/Config.in:4:symbol NFS_KERNEL_SERVER_V4 depends on PACKAGE_nfs-kernel-server # # configuration written to .config # 19.07 branch uses kernel 4.14 only, so CONFIG_LINUX_4_9 symbol is not needed anyway. Ref: https://github.com/openwrt/packages/issues/10490 Signed-off-by: Sungbo Eo

kernel: fix *-gpio-custom module unloading

2019-12-22T23:31:55Z

Unloading and reloading the modules fails, as platform_device_put() does not release resources fully. root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5 [ 196.860620] Custom GPIO-based I2C driver version 0.1.1 [ 196.871162] ------------[ cut here ]------------ [ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158 [ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0' ... [ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory. This patch fixes it by replacing platform_device_put() to platform_device_unregister(). Fixes: da7740853715 ("i2c-gpio-custom: minor bugfix") Fixes: 3bc81edc70e8 ("package: fix w1-gpio-custom package (closes #6770)") Signed-off-by: Sungbo Eo (cherry picked from commit a22b7a60d98836343c4f7b9ec0fcae68d9131522)