Staging tree of Piotr Dymacz https://git.openwrt.org/openwrt/staging/pepe2k/atom?h=v21.02.1 2021-10-20T22:19:43Z 2021-10-20T22:19:43Z Andrew Robbins 2021-10-05T15:00:16Z urn:sha1:284f8a64b735e703aa00baa2a5fc4e5629bbf988 Add in a fix for 160Mhz dfs on 5.10 and higher. Add support for 5.13 and 5.15 kernels. Add of_get_mac_address support for 5.15 driver. Signed-off-by: Andrew Robbins <andrew@robbinsa.me> (cherry picked from commit 1d2bc94f786434e89bc87003b2a2202e92ad84e7) 2021-09-22T20:36:15Z Hauke Mehrtens 2021-09-14T21:51:34Z urn:sha1:65835e0d5fcd7d688a5e5161d3b8ecf8cbd30b79 Refresh all patches. The removed patches were integrated upstream. This contains fixes for CVE-2020-3702 1. These patches (ath, ath9k, mac80211) were included in kernel versions since 4.14.245 and 4.19.205. They fix security vulnerability CVE-2020-3702 [1] similar to KrØØk, which was found by ESET [2]. Thank you Josef Schlehofer for reporting this problem. [1] https://nvd.nist.gov/vuln/detail/CVE-2020-3702 [2] https://www.welivesecurity.com/2020/08/06/beyond-kr00k-even-more-wifi-chips-vulnerable-eavesdropping/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2021-07-02T14:19:33Z Michael Yartys 2021-06-21T11:37:20Z urn:sha1:86f617178885c59665cc6ce01c570f128c06d151 Add forgotten colon to Makefile. Signed-off-by: Michael Yartys <michael.yartys@protonmail.com> (cherry picked from commit f0f1d68d528402b4d51a1dd08d2e2c9034167f92) 2021-07-02T14:19:33Z Michael Yartys 2021-06-03T21:50:12Z urn:sha1:24cfa5005eb475d5a182f5e82dbfa469ccc7c071 Changelog: - ath10k-ct: Add security fixes. - ath10k-ct: Add 5.12 kernel version. - ath10k-ct: Fix the beacon/mcast/bcast override issue - ath10k-ct 5.7: Fix setting mcast/bcast/beacon rate from debugfs. - ath10k-ct: Add 5.11 driver. Delete upstreamed patch and refresh the rest. Also, use the opportunity to set PKG_RELEASE to $(AUTORELEASE). Runtime-tested on ipq806x (Netgear R7800). Signed-off-by: Michael Yartys <michael.yartys@protonmail.com> (cherry picked from commit 2e10ed925e1e07c28570731a429efa5e7de3b826) 2021-07-02T11:31:11Z DENG Qingfang 2021-04-09T04:25:08Z urn:sha1:69c10497c7fe4fada202c40825903fe9a033ade3 As the name suggests, act_gact has the generic actions such as dropping and accepting packets, so move it into kmod-sched-core. Signed-off-by: DENG Qingfang <dqfext@gmail.com> (cherry-picked from commit 10aacb9a6ce3445cdee39573f4120e7888beb022) 2021-06-30T17:24:55Z Bob Cantor 2021-06-24T18:14:47Z urn:sha1:6f13a390355d15bc1ecff59eba769d0189d05083 drv_mac80211_teardown fails silently if the device to be torn down is not defined. This commit prints an error message. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit 3933e29d1b87c713167cf4730b68e5f18af4f140) 2021-06-30T17:24:55Z Bob Cantor 2021-06-24T18:07:34Z urn:sha1:9302e63d1a3589f764e61caf0b3ecdad524458ea When wifi is turned off, drv_mac80211_teardown sometimes fails (silently) because the device to be torn down is not defined. This situation arises if drv_mac80211_setup was called twice when wifi was turned on. This commit ensures that the device to be torn down is always defined in drv_mac80211_teardown. Steps to reproduce: 1) Use /sbin/wifi to turn on wifi. uci set wireless.@wifi-iface[0].disabled=0 uci set wireless.@wifi-device[0].disabled=0 uci commit wifi 2) Use /sbin/wifi to turn off wifi. uci set wireless.@wifi-device[0].disabled=1 uci commit wifi 3) Observe that wifi is still up. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit d515f6b6cde357bf480d32a7387f07ea40e85e52) 2021-06-30T17:24:55Z Bob Cantor 2021-06-24T17:18:33Z urn:sha1:bea9380149d58e79bed4bf4b8298066bd36edde8 If drv_mac80211_setup is called twice with the same wifi configuration, then the second call returns early with error HOSTAPD_START_FAILED. (wifi works nevertheless, despite the fact that setup is incomplete. But "ubus call network.wireless status" erroneously reports that radio0 is down.) The relevant part of drv_mac80211_setup is, if [ "$no_reload" != "0" ]; then add_ap=1 ubus wait_for hostapd local hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")" ret="$?" [ "$ret" != 0 -o -z "$hostapd_res" ] && { wireless_setup_failed HOSTAPD_START_FAILED return } wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1 fi This commit sets no_reload = 0 during the second call of drv_mac80211_setup. It is perhaps worth providing a way to reproduce the situation where drv_mac80211_setup is called twice. When /sbin/wifi is used to turn on wifi, uci set wireless.@wifi-iface[0].disabled=0 uci set wireless.@wifi-device[0].disabled=0 uci commit wifi /sbin/wifi makes the following ubus calls, ubus call network reload ubus call network.wireless down ubus call network.wireless up The first and third ubus calls both call drv_mac80211_setup, while the second ubus call triggers wireless_device_setup_cancel. So the call sequence becomes, drv_mac80211_setup wireless_device_setup_cancel drv_mac80211_setup In contrast, when LuCI is used to turn on wifi only a single call is made to drv_mac80211_setup. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit a29ab3b79affb62fda82e0825ed811eaf482dd3c) 2021-06-30T17:24:55Z Felix Fietkau 2021-06-30T17:08:59Z urn:sha1:ccbe535604e3e4ad6017e57865ed140ae4926be6 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit de499573006ab4f32ded9fd66a62ec5e0c183e8a) 2021-06-30T17:24:55Z Felix Fietkau 2021-06-06T18:58:33Z urn:sha1:4c29ff7cb8fcfd4ba26942019837656ed0258cfb Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit f2c6d892cacb5d884bdd638bc7574c1ee98514a5)