staging/pepe2k/package/kernel, branch v23.05.2

mac80211: fix not set noscan option for wpa_supplicant

2023-11-09T15:10:25Z

noscan option was changed to hostapd_noscan but the entry in wpa_supplicant was never updated resulting in the noscan option actually never set. Signed-off-by: Christian Marangi (cherry picked from commit 1070fbce6e496da2dacf17c6e842a4369c4be71b)

build: hide kmod-zram config unless enabled

2023-10-30T23:44:03Z

Currently the zram default compressor choice is displayed whether or not zram is activated. Since the default choice is lzo-rle, this adds a false dependency on kmod-lib-lzo. With this patch, the choice options appear only when activating zram. Signed-off-by: Rani Hod (cherry picked from commit 62ada26de28e6c43a957b8f186ead1f45e6a5623)

mac80211: fix AP reconfiguration on DFS channels in non-ETSI regdomain

2023-09-18T14:52:25Z

Allow grace period for DFS available after shutting down beacons on the channel Signed-off-by: Felix Fietkau (cherry picked from commit 16889141d99d3ec1410f3b4dc22de4022dbe9057)

hostapd: backport from master, including ucode based reload support

2023-09-18T14:52:25Z

This significantly improves config reload behavior and also fixes some corner cases related to running AP + mesh interfaces at the same time. Signed-off-by: Felix Fietkau

kernel: enable vfio and vfio-pci for armsr-armv8

2023-09-16T19:00:38Z

Arm platforms with the right hardware blocks (such as GICv3.0+ interrupt controller and SMMU/IOMMU) are able to use vfio-pci to pass through PCI devices to a VM. Signed-off-by: Mathew McBride (cherry picked from commit 9ac01aac0a820f2c48b2ab26628a8c90fb005f20)

kernel: vfio: remove unneeded enable_unsafe_noiommu_mode parameter

2023-09-16T19:00:38Z

The vfio module only exposes the enable_unsafe_noiommu_mode parameter if CONFIG_VFIO_NOIOMMU is enabled. When it isn't, the module will complain about an unknown parameter: vfio: unknown parameter 'enable_unsafe_noiommu_mode' ignored As CONFIG_VFIO_NOIOMMU is disabled by the module package, we can remove the module loading parameter. Signed-off-by: Mathew McBride (cherry picked from commit 7ad8612a23add071608815e3c78a477c4fbad0d3)

kernel: add vhost-net module

2023-09-16T19:00:38Z

vhost-net is used to accelerate traffic to virtualisation guests that use the virtio-net network card in QEMU. Generally it is invoked by specifying "vhost=on" to a QEMU -netdev device: qemu-system-aarch64 -nographic -M virt -cpu host \ --enable-kvm -bios u-boot.bin -smp 1 -m 2048 \ -drive file=openwrt-armsr-armv8.img,format=raw,index=0,media=disk \ -device "virtio-net,netdev=landev,disable-legacy=off,disable-modern=off" \ -netdev "tap,id=landev,helper=/usr/lib/qemu-bridge-helper --br=br-lan,vhost=on" Signed-off-by: Mathew McBride (cherry picked from commit d188db8aed74547f98b905254d4f57baf225f1d6)

mac80211: fix MT7620 Wi-Fi channel scanning function

2023-09-05T21:57:42Z

During the channel scanning process, the driver will continuously switch channels. It seems that the full RF calibration step in rt2800_config_channel() caused the channel scanning function to timeout. To fix it, move the RF calibration to rt2800_enable_radio() so that it is only executed once. This commit also includes some coding format adjustments to follow the Linux recommended style. Fixes: 2824fa6963cf ("mac80211: rework MT7620 PA/LNA RF calibration") Signed-off-by: Shiji Yang (cherry picked from commit ce6ad123e76311d2a882054b4ea532d1bfb643c8)

mac80211: rework MT7620 PA/LNA RF calibration

2023-09-04T22:00:35Z

This patch makes some improvements to the MT7620 RF calibration. 1. Move MT7620 PA/LNA calibration code to dedicated functions. 2. Restore RF and BBP registers before R-Calibration. 3. Do Rx DCOC calibration again before RXIQ calibration. 4. Use SoC specific AGC initial LNA value. 5. Correct MAC_RX_EN mask in rt2800_r_calibration()[1]. [1] This change may fix the "BBP/RF register access failed" error: ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting Signed-off-by: Shiji Yang (cherry picked from commit 2824fa6963cf245b7e0b04aa96bcbe5013524b85)

mt76: update to the latest version

2023-08-26T11:30:25Z

bdf7ca5db707 wifi: mt76: mt7921: move common register definition in mt792x_regs.h ae15d5c6b567 wifi: mt76: mt7921: convert acpisar and clc pointers to void 02515b6b90f0 wifi: mt76: mt7921: rename mt7921_vif in mt792x_vif 6ed8a8bdc7b6 wifi: mt76: mt7921: rename mt7921_sta in mt792x_sta 80234e64e7c5 wifi: mt76: mt7921: rename mt7921_phy in mt792x_phy 2485b4222d3d wifi: mt76: mt7921: rename mt7921_dev in mt792x_dev c6fd7cde77e0 wifi: mt76: mt7921: rename mt7921_hif_ops in mt792x_hif_ops 1a1a57b5f8c4 wifi: mt76: mt792x: move shared structure definition in mt792x.h 68508aab4241 wifi: mt76: mt7921: move mt792x_mutex_{acquire/release} in mt792x.h ff306af07e65 wifi: mt76: mt7921: move mt792x_hw_dev in mt792x.h 4b49d659acab wifi: mt76: mt7921: Replace fake flex-arrays with flexible-array members 93f821cce8f5 wifi: mt76: mt792x: introduce mt792x-lib module de7b90721280 wifi: mt76: mt7921: move mac shared code in mt792x-lib module c68ee8a64bef wifi: mt76: mt7921: move dma shared code in mt792x-lib module 8d561811f271 wifi: mt76: mt7921: move debugfs shared code in mt792x-lib module 0034ae289046 wifi: mt76: mt7921: move init shared code in mt792x-lib module 8419c4e793a7 wifi: mt76: mt792x: introduce mt792x_irq_map b7c7fadf228c wifi: mt76: mt792x: move more dma shared code in mt792x_dma 0b1603ce707c wifi: mt76: mt7921: move hif_ops macro in mt792x.h e07540abe87a wifi: mt76: mt7921: move shared runtime-pm code on mt792x-lib 3d65cd7a8dad wifi: mt76: mt7921: move runtime-pm pci code in mt792x-lib 4551f8c838e6 wifi: mt76: mt7921: move acpi_sar code in mt792x-lib module bd84b8ebaff8 wifi: mt76: mt792x: introduce mt792x-usb module 7067ea0f1bab wifi: mt76: mt792x: move mt7921_load_firmware in mt792x-lib module cf752af84c35 wifi: mt76: mt76_connac3: move lmac queue enumeration in mt76_connac3_mac.h 700041dcf773 wifi: mt76: mt792x: move MT7921_PM_TIMEOUT and MT7921_HW_SCAN_TIMEOUT in common code 58b2b90ad89b wifi: mt76: mt7921: move mt7921_dma_init in pci.c 9e4cb87a04cf wifi: mt76: mt7921: move mt7921u_disconnect mt792x-lib c19b62fe6b68 wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH 4904ab2f87cd wifi: mt76: fix return value check in mt76x02_mac_process_rx 1f0fbbee359c wifi: mt76: mt7915: fix tlv length of mt7915_mcu_get_chan_mib_info 24a54ee3a5ec wifi: mt76: mt7915: fix power-limits while chan_switch 80b8bcf0e3ea wifi: mt76: mt7603: rework/fix rx pse hang check a8d9553d8fc4 wifi: mt76: mt7603: improve watchdog reset reliablity c03d84c0d018 wifi: mt76: mt7603: improve stuck beacon handling 85cc58378d25 wifi: mt76: mt7603: add missing register initialization for MT7628 b14c2351ddb8 wifi: mt76: mt7603: disable A-MSDU tx support on MT7628 Signed-off-by: Felix Fietkau (cherry picked from commit 6b3737be323f702d5c1c5533db7d7351603dad0f)