staging/pepe2k/package/kernel, branch v23.05.4

mac80211: fix mesh id corruption on 32 bit systems

2024-07-10T21:36:36Z

increase size of ifmsh->mbss_changed Signed-off-by: Felix Fietkau (cherry picked from commit 20bd3502d3a841457cc06b3aa45646258fdcba9e) Link: https://github.com/openwrt/openwrt/pull/15836 [Moved the patch to the end of the patch queue] Signed-off-by: Hauke Mehrtens

kernel: update deprecated license information

2024-07-10T21:07:36Z

Update the deprecated license information from GPL-2.0 to GPL-2.0-only as written in the COPYING file of the linux source tree. Also add the 'COPYING' file to the PKG_LICENSE_FILES variable. Signed-off-by: Florian Eckert (cherry picked from commit 879826154fd3e5ec353117a9c00cecf5e38c4a16) Link: https://github.com/openwrt/openwrt/pull/15918 Signed-off-by: Hauke Mehrtens

mac80211: add missing license information

2024-07-10T21:07:36Z

The lincense information for the packages mac80211 are missing. This commit adds the missing information. Signed-off-by: Florian Eckert Signed-off-by: Petr Štetiar [backport] (cherry picked from commit 3128157ec71c7be5c2e26a04b1f4b5080ebf870a) Link: https://github.com/openwrt/openwrt/pull/15918 Signed-off-by: Hauke Mehrtens

filogic: Add LED driver for GCA230718

2024-07-08T20:51:11Z

Add basic support for the LED driver for GCA230718. - I didn't find any documentation or driver for it, so the information below is purely based on my investigations - If there is already I driver for it, please tell me. Maybe I didn't search enough - I implemented a kernel module (leds-gca230718) to access the LEDs via DTS - The LED controller supports PWM for brightness control and ramp control for smooth blinking. This is not implemented in the driver - The LED controller supports toggling (on -> off -> on -> off) where the brightness of the LEDs can be set individually for each on cycle - Until now, only simple active/inactive control is implemented (like when the LEDs would have been connected via GPIO) - Controlling the LEDs requires three sequences sent to the chip. Each sequence consists of - A reset command (0x81 0xE4) written to register 0x00 - A control command (for example 0x0C 0x02 0x01 0x00 0x00 0x00 0xFF 0x01 0x00 0x00 0x00 0xFF 0x87 written to register 0x03) - The reset command is always the same - In the control command - byte 0 is always the same - byte 1 (0x02 in the example above) must be changed in every sequence: 0x02 -> 0x01 -> 0x03) - byte 2 is set to 0x01 which disables toggling. 0x02 would be LED toggling without ramp control, 0x03 would be toggling with ramp control - byte 3 to 6 define the brightness values for the LEDs (R,G,B,W) for the first on cycle when toggling - byte 7 defines the toggling frequency (if toggling enabled) - byte 8 to 11 define the brightness values for the LEDs (R,G,B,W) for the second on cycle when toggling - byte 12 is constant 0x87 Signed-off-by: Roland Reinl (cherry picked from commit 0682974aa8da4855ca373d195cb6365913fc1f8e)

mt76: mt7996: select required kernel and hostap options

2024-07-08T19:13:26Z

Select DRIVER_11AX_SUPPORT and KERNEL_RELAY also for kmod-mt7996 to prevent build failure if only this driver is selected during build and end up with (most) required hostap features (IEEE 802.11be rates are not yet supported). Reported-by: Arınç ÜNAL Signed-off-by: Daniel Golle (cherry picked from commit 83311b747012e0675f96af18793e92cb8320c707) Link: https://github.com/openwrt/openwrt/pull/15898 Signed-off-by: Hauke Mehrtens

kernel: crypto: remove FCRYPT from miscellany

2024-07-08T19:13:25Z

It has its own dedicated knob Signed-off-by: Nathaniel Wesley Filardo Link: https://github.com/openwrt/openwrt/pull/15761 Signed-off-by: Robert Marko (cherry picked from commit 7d71c03ab188a58d74d6cdbeabb38b70ead2c74b) Link: https://github.com/openwrt/openwrt/pull/15898 Signed-off-by: Hauke Mehrtens

kernel: Add kmod-mfd

2024-07-08T19:13:25Z

Package the mfd-core.ko kernel module. It is selected by the kmod-hwmon-gsc already. Link: https://github.com/openwrt/openwrt/pull/15833 Signed-off-by: Christian Marangi (cherry picked from commit 8b4fd1c0dece936dc2c79f2a17d824512e7e7df3) Link: https://github.com/openwrt/openwrt/pull/15898 Signed-off-by: Hauke Mehrtens

kernel: Add kmod-crypto-xxhash

2024-07-08T19:13:25Z

kxxhash_generic.ko is a soft dependency of kmod-fs-btrfs, but we did not package it. Extract the kmod-lib-xxhash and then package xxhash_generic.ko. Link: https://github.com/openwrt/openwrt/pull/15833 Signed-off-by: Christian Marangi (cherry picked from commit 2ebeda029490e308cc0e8f475e63280f960e74c4) Link: https://github.com/openwrt/openwrt/pull/15898 Signed-off-by: Hauke Mehrtens

kernel: Add kmod-crypto-blake2b

2024-07-08T19:13:25Z

The kmod-fs-btrfs package has a soft dependency to kmod-crypto-blake2b The CONFIG_BTRFS_FS kernel build option selects CONFIG_CRYPTO_BLAKE2B, but we did not package it before. Link: https://github.com/openwrt/openwrt/pull/15833 Signed-off-by: Christian Marangi (cherry picked from commit f89091bba6be483e66c5ac14c477621f74aef203) Link: https://github.com/openwrt/openwrt/pull/15898 Signed-off-by: Hauke Mehrtens

kernel: Fix kmod-lib-lz4 packaging

2024-07-08T19:13:24Z

The kernel provides two variants of the lz4 compression a normal version and a high compression mode version. The old kmod-lib-lz4 package contained the normal version plus one part of the lz4hc version. There was already code which selected the kmod-lib-lz4hc package which did not exists. I split this into 3 packages. kmod-lib-lz4 and kmod-lib-lz4hc for the normal the and high compression algorithm which contain the specific code and the kmod-lib-lz4-decompress which contains the common decompressor. New we are also packaging lz4hc.ko Link: https://github.com/openwrt/openwrt/pull/15833 Signed-off-by: Christian Marangi (cherry picked from commit fac507606d75eec04762013582273468eea7ed92) Link: https://github.com/openwrt/openwrt/pull/15898 Signed-off-by: Hauke Mehrtens