staging/pepe2k/scripts, branch v22.03.3

scripts/ext-tools: introduce new script to install prebuilt tools

2022-12-04T15:45:30Z

Add a simple script to make it easier to install a prebuilt tools tar. Currently it will be used by our tools container and kernel workflow on github. Simple script that take a tar that contains prebuilt host tools, extract them and refresh the timestamps to skip recompilation of such host tools. By default it refresh timestamps of build_dir/host and staging_dir/host/stamp. Signed-off-by: Christian Marangi (cherry picked from commit 5428bdc2dfaa45bc7adc89c3b9224da7d21961d0)

ramips: add support for ZyXEL NWA50AX / NWA55AXE

2022-10-14T21:14:50Z

Hardware -------- CPU: Mediatek MT7621 RAM: 256M DDR3 FLASH: 128M NAND ETH: 1x Gigabit Ethernet WiFi: Mediatek MT7915 (2.4/5GHz 802.11ax 2x2 DBDC) BTN: 1x Reset (NWA50AX only) LED: 1x Multi-Color (NWA50AX only) UART Console ------------ NWA50AX: Available below the rubber cover next to the ethernet port. NWA55AXE: Available on the board when disassembling the device. Settings: 115200 8N1 Layout: <12V> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. If the currently installed image is started from Slot A, the device will flash OpenWrt to Slot B. OpenWrt will panic upon first boot in this case and the device will return to the ZyXEL firmware upon next boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP ----------------- This installation routine is especially useful in case * unknown device password (NWA55AXE lacks reset button) * bricked device Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to owrt.bin $ atnf owrt.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd10 get-status $ zyxel-bootconfig /dev/mtd10 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd10 set-active-image 0 Copy the OpenWrt ramboot-factory image to the device using scp. Write the factory image to NAND and reboot the device. $ mtd write ramboot-factory.bin firmware $ reboot Signed-off-by: David Bauer (cherry picked from commit a0b7fef0ffe4cd9cca39a652a37e4f3ce8f0a681)

scripts: ext-toolchain: add support for musl

2022-10-03T15:40:26Z

Openwrt now supports only glibc and musl. Add support for musl and rework the libc check to handle the new config flags and correctly compile package basend on that. Signed-off-by: Christian Marangi (cherry picked from commit 7be01fe13b4517e5edb8a4818f437d60144cdcb4)

scripts: ext-toolchain: add support for info.mk in probe_cc

2022-10-03T15:40:26Z

Openwrt generate info.mk that contains the libc type. For probe_cc check if the file exist and parse directly it for LIBC type. Signed-off-by: Christian Marangi (cherry picked from commit 75311977f5ff64b491cb57ac713d75e0e410d786)

scripts: ext-toolchain: actually probe libc type on config generation

2022-10-03T15:40:26Z

Currently we never call probe_cc before config generation, this cause the script to never actually detect the correct libc type. Call probe_cc before config generation to correctl set the .config file. Signed-off-by: Christian Marangi (cherry picked from commit ddeabc75ebe3151ff7da302cb1aae702b3ad7eba)

scripts: ext-toolchain: add option to overwrite config

2022-10-03T15:40:26Z

It can be useful to overwrite an already generated config. Option are simply added at the end of the config and make defconfig will overwrite the relevant option with the new one. Signed-off-by: Christian Marangi (cherry picked from commit f4dd18ca39c42a324e34633c8ee553717531bc3b)

scripts: ext-toolchain: fix wrong prefix in print_config generation

2022-10-03T15:40:26Z

The parsed prefix in print_config is wrong and this produce broken generated .config that won't work with any external toolchain. Currently the prefix from a CC of 'arm-openwrt-linux-muslgnueabi-gcc-12.1.0' produce a prefix 'arm-openwrt-linux-muslgnueabi-gcc-' This is wrong as the real prefix should be 'arm-openwrt-linux-muslgnueabi-' This is probably caused by a change in how the toolchain is now handled that now append also the gcc version. Probably in ancient days the version wasn't part of the name and the prefix generation stripped the '-gcc' instead of the gcc version. Fix this and correctly strip the gcc version and the gcc suffix to correctly call toolchain bins. Signed-off-by: Christian Marangi (cherry picked from commit 53c293262fce844c8291ab82e6726a8489d3c57b)

scripts/download.pl: fix downloads with wget

2022-09-16T16:50:46Z

Several users of wget for downloads (curl is not available in the system) have reported broken download functionality: wget --tries=5 --timeout=20 --output-document=- https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.142.tar.xz http://: Invalid host name. Thats all happening due to '' was passed as an argument, which got later expanded to http://. In the context of a list constructor '' is not nothing, it is an empty string element. So fix it by using () as it will yield "nothing" and thus not introduce an empty string element. Fixes: #10692 Fixes: 90c6e3aedf16 ("scripts: always check certificates") Signed-off-by: Jo-Philipp Wich [shellwords() -> ()] Signed-off-by: Petr Štetiar (cherry picked from commit 50a48faa1b8424e6b4b436b7118fffa2cba14b18)

scripts/download.pl: silence can't exec curl warning

2022-09-16T16:50:46Z

When running build in verbose mode `make V=s` we can see a lot of following warnings when curl is not available in the system: Can't exec "curl": No such file or directory at scripts/download.pl line 77. So lets fix it by redirecting of the stderr to null hole. Signed-off-by: Petr Štetiar (cherry picked from commit c836ca84e8f641e10a8349a8f9b7432b33d6cec1)

scripts: always check certificates

2022-09-16T16:50:46Z

Remove flags from wget and curl instructing them to ignore bad server certificates. Although other mechanisms can protect against malicious modifications of downloads, other vectors of attack may be available to an adversary. TLS certificate verification can be disabled by turning oof the "Enable TLS certificate verification during package download" option enabled by default in the "Global build settings" in "make menuconfig" Signed-off-by: Josh Roys [ add additional info on how to disable this option ] Signed-off-by: Christian Marangi (cherry picked from commit 90c6e3aedf167b0ae1baf376e7800a631681e69a)