staging/pepe2k/scripts, branch v23.05.0

scripts: qemustart: Fix x86/legacy bootup

2023-08-15T15:19:05Z

The ide-drive option was renamed to ide-hd in qemu 6.0. With this change qemu is starting again on Debian 12. Signed-off-by: Hauke Mehrtens (cherry picked from commit 497012ab4eb1f37cbbbff9a766d2fecdb43dd0db)

scripts: use sep-char for hash nodes

2023-07-26T13:39:24Z

U-Boot with enabled secure-boot will not boot images with the @-character used for hash node-names. Use the existing separation character configurable for each device. Signed-off-by: David Bauer (cherry picked from commit 2b133ab19cd5d741f3191f917c607667943f5f58)

mediatek: add support for ZyXEL NWA50AX Pro

2023-07-23T14:10:08Z

Hardware -------- CPU: Mediatek MT7981 RAM: 512M DDR4 FLASH: 256M NAND ETH: MaxLinear GPY211 (2.5GbE N Base-T) WiFi: Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax) BTN: 1x Reset LED: 1x Multi-Color UART Console ------------ Available below the rubber cover next to the ethernet port. Settings: 115200 8N1 Layout: <12V> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. In case this is not the case, OpenWrt will boot only one time, returning to the ZyXEL firmware the second boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP / Recovery ---------------------------- This installation routine is especially useful in case of a bricked device. Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin. $ atnf nwa50axpro-openwrt-initramfs.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd9 get-status $ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd9 set-active-image 0 Copy the OpenWrt sysupgrade image to the device using scp. Write the sysupgrade image to NAND using sysupgrade. $ sysupgrade -n image.bin Signed-off-by: David Bauer (cherry picked from commit f0445746f6fd96fc7c5394b238153bd2ff22bc5b)

build: fix generation of large .vdi images

2023-07-15T20:24:50Z

Instead of loading the whole image into the memory when generating the sha256 sum, we load the file in chunks and update the hash incrementally to avoid MemoryError in python. Also remove a stray empty line. Fixes: #13056 Signed-off-by: Adones Pitogo (mention empty line removal, adds Fixes from PR) Signed-off-by: Christian Lamparter (cherry picked from commit bdb4b78210cfb6bc8a6cda62fc990dd45ec3054c)

scripts/mkits.sh: DT overlays don't need a loadaddr

2023-07-13T11:05:28Z

DT overlays do not need relocation in order to be applied, so drop defining the load address for dtbos. Signed-off-by: Daniel Golle (cherry picked from commit cff3786bd54cec8276f1fd08d5c6697846f393a5)

image: add additional fields to Netgear encrypted image

2023-07-13T11:05:28Z

These fields are used for EAX12 and EX6250v2 series, and perhaps other devices. Compatibility is preserved with the WAX202 and WAX206. In addition, adds the related vars to DEVICE_VARS so that the variables work correctly with multiple devices. References in GPL source: https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz * tools/imgencoder/src/gj_enc.c Contains code that generates the encrypted image. Signed-off-by: Wenli Looi (cherry picked from commit 0a1ebccc8702cadc50bc096f1e185472f3927786)

scripts: sercomm-kernel-header.py: improve compatibility

2023-06-17T10:59:37Z

This improves compatibility with the elder stock firmwares of the following devices, which have not yet been merged into OpenWrt: - Beeline SmartBox Pro - Beeline SmartBox Turbo+ - WiFire S1500.NBN Without this, OpenWrt factory image installation may fail. Signed-off-by: Mikhail Zhilkin Signed-off-by: Maximilian Weinmann (cherry picked from commit 35a4418d3966ccf6229916b0021bd18871ef22dd)

scripts: qemustart: change armvirt references to armsr

2023-06-13T12:14:34Z

The armvirt target has been renamed to 'armsr' (Arm SystemReady) after inclusion of EFI support. Change references (including subtargets) accordingly. Signed-off-by: Mathew McBride (cherry picked from commit 36bf9d861082d30fdb1cf1d00f819e60b8bb84a7)

scripts: gen_image_generic: allow the partition types to be set

2023-06-13T12:12:27Z

The use case for this is to set the kernel partition as the EFI system partition. Versions of U-Boot with the EFI boot manager (eficonfig and efidebug commands) will store their boot order data on the ESP. Signed-off-by: Mathew McBride (cherry picked from commit 701d774f54aef2f9fe3c584700773dcb260dd03c)

image: improve uImage.FIT device tree overlay support

2023-06-09T18:23:03Z

Instead of generating full config nodes incl. kernel, generate minimal config nodes for device tree overlays to be applied to the main config. In this way, multiple device tree overlays can be applied more easily. While at it change filenames to upstream style, ie. use dtso and dtbo suffix for device tree overlays. Signed-off-by: Daniel Golle (cherry picked from commit 6b01d40bfedb42323a1324e1b5624f192a4c91de)