staging/pepe2k/target/linux, branch v19.07.0

ramips: Fix sysupgrade for Xiaomi mir3g

2020-01-06T16:47:09Z

This mostly reverts the original commit e9929ebeeaef ("ramips: Fix sysupgrade for Xiaomi mir3g") and replaces it with setting the BOARD_NAME to the old value. This way the folder in the tar will be named sysupgrade-mir3g and not sysupgrade-xiaomi_mir3g and the sysupgrade in OpenWrt 18.06 can find it. Without this change sysupgrade from 18.06 to 19.07 is only possible with the -F option. I tested the following sysupgrades successfully without -F 18.06 -> 19.07 19.07 -> master master -> 19.07 Signed-off-by: Hauke Mehrtens

x86: fix missing led variable warning during boot

2020-01-06T07:40:06Z

Fixes following warning during the boot: WARNING: Variable 'led' does not exist or is not an array/object Signed-off-by: Petr Štetiar (cherry picked from commit 5816caad26ae294f0adb4ed07ed53dcba7277c33)

ramips: Fix sysupgrade for Xiaomi mir3g

2020-01-05T19:05:33Z

Without this change sysupgrade from 18.06 to 19.07 is only possible with the -F option. In OpenWrt 18.06 the nand_do_platform_check() function is called with the board name mir3g only, if the tar does not use mir3g it will fail. OpenWrt 19.07 and later support the metadata with the supported_devices attribute to allow renaming. Do the renaming of the target between 19.07 and master like it is done for some other boards. I tested the following sysupgrades successfully without -F 18.06 -> 19.07 19.07 -> master master -> 19.07 Signed-off-by: Hauke Mehrtens

ramips: remove duplicate dts nodes of MediaTek LinkIt Smart 7688

2020-01-05T19:03:18Z

There are two identical wmac nodes in the dts file of MediaTek LinkIt Smart 7688, so delete one of them. Signed-off-by: Jack Chen (cherry picked from commit 4be271a4867dcf57a122eeb7b42407e7a506915e)

sunxi: Turn on CONFIG_PINCTRL_SUN4I_A10 for A20

2020-01-05T12:09:17Z

CONFIG_PINCTRL_SUN4I_A10 controls both the A10 and the A20 enablong of the pinctrl driver, this is necessary since upstream commit 5d8d349618a9464714c07414c5888bfd9416638f ("pinctrl: sunxi: add A20 support to A10 driver") which has been included in v4.13 and onwards. Fixes: ad2b3bf310f7 ("sunxi: Add support for kernel 4.14") Signed-off-by: Florian Fainelli (cherry picked from commit 32e4eaef1b4c2a7fa44787813fdf715b2ba500d9)

kernel: bump 4.14 to 4.14.162

2020-01-04T22:04:24Z

Refreshed all patches. Compile-tested on: ipq40xx, ramips Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens

kernel: bump 4.14 to 4.14.161

2020-01-04T22:04:24Z

Refreshed all patches. Compile-tested on: ipq40xx, ramips Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens

ramips: fix Archer C20i wireless MAC address

2020-01-03T16:52:36Z

The TP-Link Archer C20i previously had a generic Ralink MAC address set for both radios, as the caldata does only contain a generic MAC address. Set the MAC address from the vendor firmware for both radios to assign unique MAC addresses to every device. Signed-off-by: David Bauer (cherry picked from commit 3b013dcdf8d8aa0e3601e3aac30342318025e32a)

ramips: fix Archer C2 v1 5GHz MAC address

2020-01-03T16:52:36Z

The TP-Link Archer C2 v1 previously had a generic Ralink MAC address set for the 5GHz radio (MT7610), as the caldata does only contain a generic MAC address. Set the MAC address from the vendor firmware for the 5GHz radio to assign unique MAC addresses to every device. Signed-off-by: David Bauer (cherry picked from commit dcc923a4c45b48fcbef4f3964f74fbcaabad335e)

ramips: add system LED indicators for TP-Link C20i

2020-01-03T16:52:36Z

Use the WPS LED to indicate system status like it is done for the TP-Link Archer C2 v1 and many other boards. Signed-off-by: David Bauer (cherry picked from commit a272fafc9c507820cc62aa12464588bac45f250a)