staging/pepe2k/target/linux, branch v21.02.7Staging tree of Piotr Dymaczhttps://git.openwrt.org/openwrt/staging/pepe2k/atom?h=v21.02.72023-04-15T02:34:22Zkernel: backport fix for recently introduced UBI bug2023-04-15T02:34:22ZDaniel Golle2023-04-15T00:35:17Zurn:sha1:34d2883b9d6fd4a3b3eb39d3fa90e8c281d36448
Import commit "ubi: Fix failure attaching when vid_hdr offset equals to
(sub)page size" which did not yet make it to stable upstream Linux trees.
Fixes: #12232
Fixes: #12339
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit aad34818b50029e07ed9221ae46f9770d6e29785)
kernel: remove obsolete netfilter tcp window size check bypass patch2023-03-30T12:18:04ZFelix Fietkau2023-03-30T12:18:04Zurn:sha1:cbe73ea33d027dbb4b2cf1eca947ae746119e7d2
On any currently supported hardware, the performance impact should not
matter anymore.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 75e78bcaab847557ce1782eb2dea9dff9a029171)
ipq40xx: Linksys MR8300: fix the USB port power2023-03-29T20:19:27ZDaniel González Cabanelas2023-02-16T22:04:20Zurn:sha1:2541ca616da8357b766130ed2f40dfc2d9e31f1c
The USB port on the MR8300 randomly fails to feed bus-powered devices.
This is caused by a misconfigured pinmux. The GPIO68 should be used to
enable the USB power (active low), but it's inside the NAND pinmux.
This GPIO pin was found in the original firmware at a startup script in
both MR8300 and EA8300. Therefore apply the fix for both boards.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ed64c3323590e3c9fa8b423bf37689023a7a101f)
Signed-off-by: Steffen Scheib <steffen@scheib.me>
kernel: bump 5.4 to 5.4.2382023-03-29T14:31:21ZHauke Mehrtens2023-03-27T14:44:54Zurn:sha1:5e69c097f74644b6733f794583bd5e143806a371
Compile-tested: armvirt/64, lantiq/xrx200
Run-tested: armvirt/64, lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
kernel: tcindex classifier has been retired2023-03-27T16:42:28ZJohn Audia2023-03-11T15:42:26Zurn:sha1:a4f065a646c103d95a0b27ca827a7a93a5e47514
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/sched?h=v5.4.235&id=7a6fb69bbcb21e9ce13bdf18c008c268874f0480
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit fbfec3286e8bfce3a78749b7bcb67e658665f197)
kernel: bump 5.4 to 5.4.2342023-03-27T16:42:03ZHauke Mehrtens2023-03-27T00:17:03Zurn:sha1:122e0c7fed72ffa592dafcfa69ad66c58f4b40dc
Compile-tested: armvirt/64, lantiq/xrx200
Run-tested: armvirt/64
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
bcm4908: include usbport trigger2023-03-27T07:36:04ZRafał Miłecki2023-03-16T21:01:51Zurn:sha1:c874aa40c22bec81643af57413c3f9ad613aeced
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit cb2661844a5d54d44230ee564d4f17605a794a49)
bcm4908: backport v6.4 pending DTS changes2023-03-27T07:36:01ZRafał Miłecki2023-03-16T19:28:47Zurn:sha1:13bd05efd72c8f98d37e5553b406954d1cb105cb
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit ffaabee9b8d9da7c15a50f52897ae5f70b40b4e7)
kernel: support "linux,default-trigger" in leds-bcm631382023-03-01T07:54:33ZRafał Miłecki2023-03-01T07:52:26Zurn:sha1:f86f8e568461681fc85caf3c972489045367030e
This driver is backported from the v6.0 which deals with
"linux,default-trigger" in leds core. For kernel 5.4 we need
leds-bcm63138 to read trigger on its own.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
kernel: bump 5.4 to 5.4.2312023-02-18T18:18:13ZHauke Mehrtens2023-02-12T23:56:17Zurn:sha1:23ad680a3450d1e17447c6b77cff57ded0f6fdbf
Compile-tested: x86/64
Run-tested: x86/64
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>