staging/pepe2k/target/linux, branch v22.03.4

ramips: define remapping-range for DAP-X1860

2023-04-08T16:10:34Z

Prevent the BBT translation layer from remapping the UBI used for storing rootfs. Explicitly define the number of blocks reserved for remapping. Signed-off-by: David Bauer (cherry picked from commit 076da59f17803e9412ef5e50988aff6c7e536292)

ramips: add support for D-Link DAP-X1860 A1

2023-04-08T16:10:33Z

The DAP-X1860 is a wall-plug AX1800 repeater. Specifications: - MT7621, 256 MiB RAM, 128 MiB SPI NAND - MT7915 + MT7975 2x2 802.11ax (DBDC) - Ethernet: 1 port 10/100/1000 - LED RSSI bargraph (2x green, 1x red/orange), status and RSSI LEDs are incorrectly populated red/orange (should be red/green according to documentation) Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tar -xvf DAP-X1860_RevA_Firmware_101b94.bin - openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \ -out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ== - tar -xvf FWImage.st1 - flash kernel_DAP-X1860.bin via Recovery Signed-off-by: Sebastian Schaper (cherry picked from commit 3c31f6b521bb5fc49e222a8f2bcd454b73452a0e)

ramips: lower re305-v3 spi-max-frequency

2023-04-08T12:56:28Z

Fix flash I/O instability observed in newer devices with cFeon QH64A-104HIP (detected as en25qh64). Ref: https://forum.openwrt.org/t/support-for-tp-link-re305-v3/75893/91 Reported-by: Dimitri Souza Tested-by: Dimitri Souza Signed-off-by: Joe Mullally [alter commit-message - target master] Signed-off-by: David Bauer (cherry picked from commit 2122c80b321d439cf8b669ae26fcfeec605cf2cc)

lantiq: fix lzma-loader for Netgear DGN 3500(B)

2023-04-02T21:01:44Z

Fixes Uncompressing Kernel Image ... ERROR: LzmaDecode.c, 561 Fixes: #11701 for both 3500(B) Signed-off-by: Maik Goette (cherry picked from commit 4d9c38d654fdfb72ef641573bbf5b0f73f638f2e)

ath79: tiny: Do not build TPLink WPA8630Pv2 by default

2023-04-02T20:25:49Z

22.03.1+ and snapshot builds no longer fit the 6M flash space available for these models. This disables failing buildbot image builds for these devices. Images can still be built manually with ImageBuilder. Signed-off-by: Joe Mullally (cherry picked from commit 4965cbd259bb9001e8724f53520f4be1e4723212)

ramips: mt7621: mikrotik 760igs (hEX S) fix SFP

2023-04-02T20:25:49Z

This device uses an AR8031/AR8033 chip to convert SoC gmac1 RGMII to 1000base-x or sgmii for the SFP fibre cage. The SFP cage requires phy-mode rgmii-rxid, and without it will not recieve any packets: ethtool -S sfp rx_fcs_errors will increase when packets should be being received, but no other _rx counters will change. Fixes: c77858aa792 ("ramips: mt7621-dts: change phy-mode of gmac1 to rgmii") Reviewed-by: Robert Marko Reviewed-by: Arınç ÜNAL Signed-off-by: John Thomson (cherry picked from commit 7ea965b57803ceec20222279377e611652ac217f)

ath79: use lzma-loader for Senao initramfs images

2023-04-02T20:07:28Z

Some vendors of Senao boards have put a bootloader that cannot handle both large gzip or large lzma files. There is no disadvantage by doing this for all of them. Signed-off-by: Michael Pratt (cherry picked from commit 8342c092a03caedbf160d4ac3982c6a9be91261f)

ath79: Fix glinet ar300m usb not working

2023-04-02T20:07:28Z

glinet forum users reported the problem at https://forum.gl-inet.com/t/gl-ar300m16-openwrt-22-03-0-rc5-usb-port-power-off-by-default/23199 The current code uses the regulator framework to control the USB power supply. Although usb0 described in DTS refers to the regulator by vbus-supply, but there is no code related to regulator implemented in the USB driver of QCA953X, so the USB of the device cannot work. Under the regulator framework, adding the regulator-always-on attribute fixes this problem, but it means that USB power will not be able to be turned off. Since we need to control the USB power supply in user space, I didn't find any other better way under the regulator framework of Linux, so I directly export gpio. Signed-off-by: Luo Chongjun (cherry picked from commit b352124cd2115fec648a00956a848660df9477d3)

ramips: rt5350: enable lzma-loader for ALLNET ALL5003

2023-04-02T20:07:28Z

Fixes the boot loader LZMA decompression issue: LZMA ERROR 1 - must RESET board to recover Signed-off-by: Sergio Paracuellos (cherry picked from commit 84c04ff4069a652755267d126418b211379c1cbf)

kernel: filter out pahole version

2023-04-02T20:07:27Z

Pahole version is being autodetected during runtime since kernel 5.15.96 via in-kernel scripts/pahole-version.sh so add CONFIG_PAHOLE_VERSION to kernel filter in order to prevent it from being added to target configs. Signed-off-by: Robert Marko (cherry picked from commit 5d8f14bfefc6f12e93425ee522bdce75a7c979d6)