staging/pepe2k/target/linux, branch v22.03.6

kernel: bump 5.10 to 5.10.201

2023-11-25T18:18:57Z

Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.201 Removed upstreamed: x86/patches-5.10/120-hwrng-geode-fix-accessing-registers.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.201&id=ffb3483c4b0bff1951e4020b9d73e4c13bf7fe93 Signed-off-by: Hauke Mehrtens

ramips: add support for SNR-CPE-W4N-MT router

2023-11-20T23:43:17Z

General specification: - SoC Type: MediaTek MT7620N (580MHz) - ROM: 8 MB SPI-NOR (W25Q64FV) - RAM: 64 MB DDR (M13S5121632A) - Switch: MediaTek MT7530 - Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) - Wireless 2.4 GHz: b/g/n - Buttons: 1 button (RESET) - Bootloader: U-Boot 1.1.3, MediaTek U-Boot: 5.0.0.5 - Power: 12 VDC, 1.0 A Flash by the native uploader in 2 stages: 1. Use the native uploader to flash an initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-initramfs-kernel.bin file by "Administration/Management/Firmware update/Choose File" in vendor's web interface (ip: 192.168.1.10, login: Admin, password: Admin). Wait ~160 seconds. 2. Flash a sysupgrade image via the initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin file by "System/Backup/Flash Firmware/Flash image..." in LuCI web interface (ip: 192.168.1.1, login: root, no password). Wait ~240 seconds. Flash by U-Boot TFTP method: 1. Configure your PC with IP 192.168.1.131 2. Set up TFTP server and put the openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin image on your PC 3. Connect serial port (57600 8N1) and turn on the router. Then interrupt "U-Boot Boot Menu" by hitting 2 key (select "2: Load system code then write to Flash via TFTP."). Press Y key when show "Warning!! Erase Linux in Flash then burn new one. Are you sure? (Y/N)" Input device IP (192.168.1.1) ==:192.168.1.1 Input server IP (192.168.1.131) ==:192.168.1.131 Input Linux Kernel filename () ==: openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin 3. Wait ~120 seconds to complete flashing Signed-off-by: Alexey Bartenev <41exey@proton.me> (cherry picked from commit 7796c2d7ef5ff465c8c75ee294b0b5fb3165f4b9) [Fix merging conflict] Signed-off-by: Alexey Bartenev <41exey@proton.me>

kernel: bump 5.10 to 5.10.200

2023-11-20T23:34:05Z

All patches automatically rebased. Signed-off-by: Hauke Mehrtens

ath79: image: allow changing kernel option in mkubntimage

2023-11-19T13:58:44Z

Backport didn't include changes to mkubntimage invocation, which allowed to pass arguments. This in result produces broken routerstation factory images, which have kernel embedded as kernel partition instead of LZMA loader. Fixes: #13260 Fixes: 8e09f9ffc3cc ("ath79: switch some RedBoot based devices to OKLI loader") Signed-off-by: Tomasz Maciej Nowak

treewide: fix shell errors during dump stage

2023-11-13T13:10:56Z

Fixes following issues: bash: -c: line 1: `echo 1686820180 | /staging_dir/host/bin/mkhash md5 | cut -b1-8' bash: -c: line 1: `echo 1686820180 | /staging_dir/host/bin/mkhash md5 | sed -E 's/(.{8})(.{4})(.{4})(.{4})(.{10})../\1-\2-\3-\4-\500/'' bash: -c: line 1: syntax error near unexpected token `|' bash: line 1: *1024*1024: syntax error: operand expected (error token is "*1024*1024") bash: line 1: (64 + ): syntax error: operand expected (error token is ")") expr: syntax error: missing argument after '+' Signed-off-by: Petr Štetiar (cherry picked from commit 8fc496be860192f8bd1f16913657626014c8863f) [ fix merge conflicts, adapt to 22.03 ] Signed-off-by: Christian Marangi

bcm53xx: refresh kernel config

2023-11-06T12:28:56Z

Signed-off-by: Rafał Miłecki

kernel: bump 5.10 to 5.10.199

2023-11-02T20:09:44Z

All patches automatically rebased. Signed-off-by: Hauke Mehrtens

kernel: bump 5.10 to 5.10.198

2023-11-02T20:09:44Z

All patches automatically rebased. Signed-off-by: Hauke Mehrtens

ath79: increase the rfkill debounce interval for TP-Link Archer C7 v2

2023-10-31T20:58:01Z

Due to circuit issue or silicon defect, sometimes the WiFi switch button of the Archer C7 v2 can be accidentally triggered multiple times in one second. This will cause WiFi to be unexpectedly shut down and trigger 'irq 23: nobody cared'[1] warning. Increasing the key debounce interval to 1000 ms can fix this issue. This patch also add the missing rfkill key label. [1] Warning Log: ``` [87765.218511] irq 23: nobody cared (try booting with the "irqpoll" option) [87765.225331] CPU: 0 PID: 317 Comm: irq/23-keys Not tainted 5.15.118 #0 ... [87765.486246] handlers: [87765.488543] [<85257547>] 0x800c29a0 threaded [<5c6328a2>] 0x80ffe0b8 [gpio_button_hotplug@4cf73d00+0x1a00] [87765.498364] Disabling IRQ #23 ``` Fixes: https://github.com/openwrt/openwrt/issues/13010 Fixes: https://github.com/openwrt/openwrt/issues/12167 Fixes: https://github.com/openwrt/openwrt/issues/11191 Fixes: https://github.com/openwrt/openwrt/issues/7835 Tested-by: Hans Hasert Signed-off-by: Shiji Yang (cherry picked from commit e32f70e7066c3110694851eced3301f50019693b)

bcm53xx: backport 1 more late DT patch accepted for v6.7

2023-10-26T09:43:41Z

Signed-off-by: Rafał Miłecki (cherry picked from commit 732ae343ffb3ad19978b75a8105d55f5e6d1d435)