staging/pepe2k/target, branch v19.07.1

kernel: fix dst reference leak in flow offload

2020-01-28T15:39:02Z

Fixes a significant amount of leaked memory with lots of connections Ref: PR#2721 Tested-by: Jerome Benoit [WRT1900AC v1] Signed-off-by: Felix Fietkau [removed 4.19 patch during cherry-pick] Signed-off-by: Petr Štetiar (cherry picked from commit c6c4701def07cd01a1b077cee93f64a9b2e3b5be)

ath79: fix SUPPORTED_DEVICES not matching ar71xx board names

2020-01-28T12:25:30Z

Based on a script for comparison, this fixes (hopefully) all errors in SUPPORTED_DEVICES for ar71xx->ath79 upgrade. Devices where old string is removed as the device does not exist in ar71xx: - dlink_dir-859-a1 - tplink_archer-a7-v5 - tplink_cpe510-v3 [only in master] Devices where string is changed because it did not match the board name in ar71xx: - tplink_tl-mr3220-v1 - tplink_tl-mr3420-v1 - tplink_tl-wr2543-v1 - tplink_tl-wr741nd-v4 - tplink_tl-wr841-v7 - ubnt_unifiac-mesh - ubnt_unifiac-mesh-pro - ubnt_unifiac-pro For this device, the correct string could not be found, but we could not determine the correct one. Thus, the string is removed for now: - tplink_tl-wr740n-v4 The script for checking this is quite simple (note that newer entries, i.e. ath79->ath79 upgrade, are displayed as missing): newpath=target/linux/ath79/image/ oldpath=target/linux/ar71xx/base-files/lib/ar71xx.sh for s in $(grep -roh "SUPPORTED_DEVICES.*" $newpath | sed 's/SUPPORTED_DEVICES *.= *//'); do found="Missing" grep -q -r "\"$s\"" $oldpath && found="Found" echo "$s: $found." done The errors might be filtered by appending 'grep "Missing"' to the script. Fixes: FS#2751 Signed-off-by: Adrian Schmutzler (cherry picked from commit 07ce940b77e6aceb095b0a16dda41e190dfc5b87)

ath79: remove SUPPORTED_DEVICES for TP-Link Archer D50 v1

2020-01-28T12:22:12Z

This device has not been supported in ar71xx, so there is no need for an explicit SUPPORTED_DEVICES entry. Signed-off-by: Adrian Schmutzler (cherry picked from commit 894bdee7563036d6627022d7f292e83241a807a7)

kernel: bump 4.14 to 4.14.167

2020-01-24T12:17:32Z

Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte

ramips: mt7621: ubnt-erx: allow sysupgrade from master

2020-01-24T07:25:39Z

Currently it's not possible to downgrade from master: Device ubiquiti,edgerouterx not supported by this image Supported devices: ubnt-erx So fix it by adding a DTS based device name from master into SUPPORTED_DEVICES list. Signed-off-by: Petr Štetiar

ar71xx: change u-boot-env to read-write for gl-ar150/-domino/mifi

2020-01-23T13:33:21Z

Change u-boot-env partitions to be mounted as read-write for gl-ar150, gl-domino and gl-mifi so uboot-envtools support is possible. Signed-off-by: Kimmo Vuorinen [commit title/message facelift] Signed-off-by: Adrian Schmutzler (cherry picked from commit 2c1cfacddedc82c7a34eeb2a26529a5f3ab423d8)

ar71xx: ubnt-rocket-m-ti: fix RSSI LED definitions

2020-01-21T13:10:13Z

When mapping for RSSI LEDs was defined for interface wlan0 on Ubiquiti Rocket M Titanium, it missed connection to actual interface. Therefore create the mapping to interface, so RSSI LEDs work without additional configuration, after starting rssileds service. While at that, split RSSI into ~equal intervals for 6 LEDs, and remove coefficients needed for PWM LEDs, as this board does not support PWM LEDs. Finally, for complete support, enable 'rssileds' package in per-device rootfs, so the indicator works out of box. Signed-off-by: Lech Perczak (cherry picked from commit 83708f233daceacebd1c49da44711cc87b49162a)

brcm47xx: fix switch port order for Netgear WN2500RP V1

2020-01-21T12:55:25Z

The Netgear WN2500RP V1 switch0 already works for LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: 4 / 3 / 2 / 1 WAN port is absent on this device and therefore removed from switch config. Signed-off-by: Walter Sonius [move block to maintain alphabetic sorting] Signed-off-by: Adrian Schmutzler (cherry picked from commit 098cbc68ee23db589ed6f0d081fe26cc385462f2)

kirkwood: fix HDD LED labels for Zyxel NSA325 in 01_leds

2020-01-21T12:55:03Z

Change the LED labels for hdd1/hdd2 in 01_leds to match their counterpart in DTS. Signed-off-by: Stephan Knauss [improve commit title and message] Signed-off-by: Adrian Schmutzler (cherry picked from commit fbf297be38a93b9ca1119e5aaffecd2299087aa5)

brcm47xx: fix switch port order for Netgear WNR3500 V2

2020-01-21T12:54:49Z

The Netgear WNR3500 V2 switch0 already works for WAN/LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: Internet / 4 / 3 / 2 / 1 this resembles the Linksys E3000 V1. Verfied with imagebuilder edit FILES=/etc/board.d/01_network Signed-off-by: Walter Sonius (cherry picked from commit cf2f1fc6871da0320afeefaa799af87fc7c0d1db)