staging/pepe2k/target, branch v21.02.6Staging tree of Piotr Dymaczhttps://git.openwrt.org/openwrt/staging/pepe2k/atom?h=v21.02.62023-04-09T12:28:16Zimagebuilder: allow to specific ROOTFS_PARTSIZE2023-04-09T12:28:16ZPaul Spooren2023-03-12T15:56:41Zurn:sha1:bc99ce5b22963c22661b3e549c3cdc86bf52756c
Setting this options modifies the rootfs size of created images. When
installing a large number of packages it may become necessary to
increase the size to have enough storage.
This option is only useful for supported devices, i.e. with an attached
SD Card or installed on a hard drive.
Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 7b7edd25a571568438c886529d3443054e02f55f)
kernel: remove obsolete netfilter tcp window size check bypass patch2023-03-30T12:18:04ZFelix Fietkau2023-03-30T12:18:04Zurn:sha1:cbe73ea33d027dbb4b2cf1eca947ae746119e7d2
On any currently supported hardware, the performance impact should not
matter anymore.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 75e78bcaab847557ce1782eb2dea9dff9a029171)
ipq40xx: Linksys MR8300: fix the USB port power2023-03-29T20:19:27ZDaniel González Cabanelas2023-02-16T22:04:20Zurn:sha1:2541ca616da8357b766130ed2f40dfc2d9e31f1c
The USB port on the MR8300 randomly fails to feed bus-powered devices.
This is caused by a misconfigured pinmux. The GPIO68 should be used to
enable the USB power (active low), but it's inside the NAND pinmux.
This GPIO pin was found in the original firmware at a startup script in
both MR8300 and EA8300. Therefore apply the fix for both boards.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ed64c3323590e3c9fa8b423bf37689023a7a101f)
Signed-off-by: Steffen Scheib <steffen@scheib.me>
kernel: bump 5.4 to 5.4.2382023-03-29T14:31:21ZHauke Mehrtens2023-03-27T14:44:54Zurn:sha1:5e69c097f74644b6733f794583bd5e143806a371
Compile-tested: armvirt/64, lantiq/xrx200
Run-tested: armvirt/64, lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
kernel: tcindex classifier has been retired2023-03-27T16:42:28ZJohn Audia2023-03-11T15:42:26Zurn:sha1:a4f065a646c103d95a0b27ca827a7a93a5e47514
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/sched?h=v5.4.235&id=7a6fb69bbcb21e9ce13bdf18c008c268874f0480
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit fbfec3286e8bfce3a78749b7bcb67e658665f197)
kernel: bump 5.4 to 5.4.2342023-03-27T16:42:03ZHauke Mehrtens2023-03-27T00:17:03Zurn:sha1:122e0c7fed72ffa592dafcfa69ad66c58f4b40dc
Compile-tested: armvirt/64, lantiq/xrx200
Run-tested: armvirt/64
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
bcm4908: include usbport trigger2023-03-27T07:36:04ZRafał Miłecki2023-03-16T21:01:51Zurn:sha1:c874aa40c22bec81643af57413c3f9ad613aeced
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit cb2661844a5d54d44230ee564d4f17605a794a49)
bcm4908: backport v6.4 pending DTS changes2023-03-27T07:36:01ZRafał Miłecki2023-03-16T19:28:47Zurn:sha1:13bd05efd72c8f98d37e5553b406954d1cb105cb
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit ffaabee9b8d9da7c15a50f52897ae5f70b40b4e7)
kernel: support "linux,default-trigger" in leds-bcm631382023-03-01T07:54:33ZRafał Miłecki2023-03-01T07:52:26Zurn:sha1:f86f8e568461681fc85caf3c972489045367030e
This driver is backported from the v6.0 which deals with
"linux,default-trigger" in leds core. For kernel 5.4 we need
leds-bcm63138 to read trigger on its own.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
kernel: bump 5.4 to 5.4.2312023-02-18T18:18:13ZHauke Mehrtens2023-02-12T23:56:17Zurn:sha1:23ad680a3450d1e17447c6b77cff57ded0f6fdbf
Compile-tested: x86/64
Run-tested: x86/64
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>