staging/wigyori/scripts, branch master

scripts: ubinize-image.sh: fix on POSIX shell, allow custom images

2024-02-16T05:32:51Z

Make sure ubinize-image.sh also works with more simple POSIX Shell and allow creating complete custom images to be used as ARTIFACT/foo.img and thereby allow including uImage.FIT, TF-A FIP and what ever else is required on a specific board. Fixes: 6c17d71973 ("scripts: ubinize-image.sh: support static volumes, make size optional") Signed-off-by: Daniel Golle

scripts: ubinize-image.sh: support static volumes, make size optional

2024-02-15T19:30:08Z

In order to support devices having TF-A FIP image or UBI-aware U-Boot SPL we need to include a static volume for the bootloader. Introduce support for adding additional static volumes by prefixing the filename with ':', eg. UBINIZE_PARTS := fip:=$(STAGING_DIR_IMAGE)/u-boot.fip Also add support for rootfs-in-uImage.FIT setups which don't require a rootfs partition and make the (3rd) size parameter in UBINIZE_PARTS optional (see example above without declared size). Signed-off-by: Daniel Golle

scripts/rstrip.sh: ignore /lib/firmware

2024-01-22T12:01:31Z

On some platforms, some firmware files might look like executables. These need to be ignored in order to avoid messing them up. Signed-off-by: Felix Fietkau

scripts: fix installed-size calculation

2024-01-08T13:08:06Z

Previously the script would calculate the size of the compressed archive which isn't the size installed in the overlayfs. This commit uses zcat in combination with wc to calculate the umcompressed size. Signed-off-by: Paul Spooren

packages: store URL in Manifest

2024-01-08T13:06:38Z

The manifest should provide as much information as possible about the package, including the project URL. With this commit the URL is stored as it's own attribute instead of at the end of the description. Signed-off-by: Paul Spooren

build: ensure silent Make behavior for json scripts

2024-01-05T15:25:14Z

Run the invocation of Make with verbosity in order to prevent the printing of Makefile level and subtarget status. e.g. make[3] -C target/linux val.DEFAULT_PACKAGES val.ARCH_PACKAGES Remove piping of stderr, which is only useful when using the "communicate" method over the "run" method, and this script would not be written to handle a captured error anyway. For error testing, stdout and stderr can be set to a file object with the open() function like this: out = open('json_out', 'w') err = open('json_err', 'w') ... ... stdout=out, stderr=err, Signed-off-by: Michael Pratt

image: fix Linksys image alignment and simplify footer creation

2023-11-26T17:37:20Z

Current factory image sizes for Linksys devices are 256-byte aligned. This is not an issue writing factory images from the OpenWrt or Linksys GUIs, but can lead to failures using a TFTP client from the Linksys bootloader: NAND write: device 1 offset 0x2800000, size 0xc00100 Attempt to write to non page aligned data NAND write to offset 2800000 failed -22 0 bytes written: ERROR Simplify Linksys footer creation by migrating to a makefile build recipe, and pre-pad the footer (with 0xFF) to ensure the final image is $(PAGESIZE) aligned. Finally, remove the old linksys-image.sh script no longer needed. Linksys footer details are given below for future reference. The 256-byte footer is appended to factory images and tested by both the Linksys Upgrader (observed in EA6350v3) and OpenWrt sysupgrade. Footer format: .LINKSYS. Checked by Linksys upgrader before continuing. (9 bytes) Upgrade version number, unchecked so arbitrary. (8 bytes) Model of device, space padded (0x20). (15 bytes) CRC checksum of factory image to flash. (8 bytes) Padding ('0' + 0x20 * 7) (8 bytes) Signature of signer, unchecked so arbitrary. (16 bytes) Padding with nulls (0x00) (192 bytes) Link: https://github.com/openwrt/openwrt/pull/11405#issuecomment-1358510123 Link: https://github.com/openwrt/openwrt/pull/11405#issuecomment-1587517739 Reported-by: Stijn Segers Reported-by: Wyatt Martin Signed-off-by: Tony Ambardar

scripts: sercomm-pid.py: use uppercase hwid in pid

2023-11-25T00:11:18Z

scripts/dump-target-info.pl: add new function to DUMP devices

2023-11-15T09:59:23Z

Add new function to dump-targer-info.pl to DUMP devices provided a matching target/subtarget. Example: ./scripts/dump-targer-info.pl devices ipq806x/generic will produce the sorted list of devices defined in the following format: device_id device_name Devices may have alternative names, the script will dump each alternative name in the same line of device_id. Following the pattern: device_id "PRIMARY DEVICE NAME" "ALT0 DEVICE NAME" "ALT1 DEVICE NAME" ... Example: tplink_ad7200 "TP-Link AD7200 v1/v2" "TP-Link Talon AD7200 v1/v2" Signed-off-by: Christian Marangi

scripts/getver.sh: prevent asking for negative rev-parse

2023-11-12T15:19:04Z

With the case of asking an invalid version that is too big, getver.sh might return an invalid output in the form of HEAD~-2260475641. This is caused by BASE_REV - GET_REV using a negative number. Prevent this by checking if BASE_REV - GET_REV actually return 0 or a positive number and set REV variable accordingly. With the following change, invalid revision number will result in unknown printed instead of the invalid HEAD~-NUMBERS output. Signed-off-by: Christian Marangi