staging/xback/package/kernel, branch v17.01.3

ltq-vdsl-mei: revert disable optimized firmware download

2017-09-30T18:37:33Z

This reverts commit b428f45c062dc8ca8c2f35f491fa467dc5b85519. If the optimized firmware download is disabled, the xdsl subsystem hangs in the "idle request" state after physically disconnecting and reconnecting the xdsl modem from the line. It might fix the failing line init on boot as well. Signed-off-by: Mathias Kresin

ltq-vdsl-mei: disable optimized firmware download

2017-09-28T05:22:58Z

With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and enabled by default. As soon as the optimized firmware download is enabled, a watchdog based reboot is trigger between 24h to 48h of uptime if the board isn't connected to a xdsl line. Signed-off-by: Mathias Kresin

ltq-vdsl: fix PM thread suspend and resume handling

2017-09-28T05:22:58Z

This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM thread handling issues which lead to high system load and watchdog trigger within 1h of uptime for boards not connected to a xdsl line. Signed-off-by: Martin Schiller

treewide: fix shellscript syntax errors/typos

2017-09-13T06:07:39Z

Fix multiple syntax errors in shelscripts (of packages only) These errors were causing many conditions to not working properly Signed-off-by: Lorenzo Santina [increase PKG_RELEASE, drop command substitution from directip.sh] Signed-off-by: Mathias Kresin

kernel: netfilter: fix nf-nathelper(-extra) description

2017-07-25T19:02:27Z

The tftp and irc netfilter modules are provided by nf-nathelper-extra and not by nf-nathelper. Signed-off-by: Uwe Arnold [move the irc module as well] Signed-off-by: Mathias Kresin

mwlwifi: update to version 10.3.4.0 / 2017-06-06

2017-06-08T17:57:31Z

Signed-off-by: Jo-Philipp Wich

mac80211, hostapd: always explicitly set beacon interval

2017-05-27T12:24:13Z

One of the latest mac80211 updates added sanity checks, requiring the beacon intervals of all VIFs of the same radio to match. This often broke AP+11s setups, as these modes use different default intervals, at least in some configurations (observed on ath9k). Instead of relying on driver or hostapd defaults, change the scripts to always explicitly set the beacon interval, defaulting to 100. This also applies the beacon interval to 11s interfaces, which had been forgotten before. VIF-specific beacon_int setting is removed from hostapd.sh. Fixes FS#619. Signed-off-by: Matthias Schiffer

kernel: fix autoloading arch-specific modules

2017-05-25T15:21:36Z

Fixes FS#745 Signed-off-by: Yousong Zhou

backlight-pwm: fix module description

2017-05-25T15:21:35Z

Signed-off-by: Yousong Zhou

om-watchdog: add support for Teltonika RUT5xx (ramips)

2017-05-15T20:55:54Z

Add rut5xx GPIO PIN selection to om-package startup script. Testet on a RUT500 device, the timeout value of the hardware watchdog is about 280 sec. Signed-off-by: Steffen Weinreich [split into two commits, bump PKG_RELEASE] Signed-off-by: Piotr Dymacz