svn-archive/archive/target/linux/generic/files/include, branch master

treewide: fix replace nbd@openwrt.org with nbd@nbd.name

2016-06-07T06:59:36Z

Signed-off-by: Felix Fietkau SVN-Revision: 49379

mac80211: ath9k: enable GPIO buttons

2016-03-05T09:45:03Z

Enable platform-defined GPIO button support for ath9k device. Key poller is activated for attached platform buttons. Requires ath9k GPIO chip access. Signed-off-by: Michal Cieslakiewicz SVN-Revision: 48921

mac80211: ath9k: enable platform WLAN LED name

2016-03-02T13:22:40Z

Enable platform-supplied WLAN LED name for ath9k device. Signed-off-by: Michal Cieslakiewicz Acked-by: Hartmut Knaack SVN-Revision: 48879

swconfig: add (PHY) generic helper setting port link

2016-02-03T09:33:38Z

It's quite common for switches to have PHY per port so adding a generic helper setting link state will help many drivers. It just needs an API to access PHYs which this patch also adds. Signed-off-by: Rafał Miłecki SVN-Revision: 48621

swconfig: add API for setting port link speed

2016-01-06T18:32:21Z

Some switches can force link speed for a port. Let's add API that will allow drivers to export this feature. Signed-off-by: Rafał Miłecki SVN-Revision: 48142

swconfig: add SWITCH_TYPE_LINK and support sending link info to user space

2015-12-23T19:24:30Z

So far we were sending link data as a string. It got some drawbacks: 1) Didn't allow writing clean user space apps reading link state. It was needed to do some screen scraping. 2) Forced whole PORT_LINK communication to be string based. Adding support for *setting* port link required passing string and parting it in the kernel space. Signed-off-by: Rafał Miłecki SVN-Revision: 47997

ar8216: rework/fix AR8337 MAC swap handling

2015-12-20T14:25:45Z

In r45970 the MAC swap handling was made opt-in, however some boards have been forgotten during the conversion. Since the reference design uses this MAC swapping, and pretty much all known boards using this chip seem to do so too, enabling the swapping is a more reasonable default than leaving it disabled. Change the code to still allow boards to opt-out of this. Signed-off-by: Felix Fietkau SVN-Revision: 47956

ath9k: Allow configuration of LED polarity in platform data.

2015-12-17T09:27:24Z

Signed-off-by: Vittorio Gambaletta SVN-Revision: 47910

ar8216: Fix problem with AR8337 MAC swap handling

2015-06-14T17:43:50Z

AR8337 supports a configuration bit to swap MAC0 and MAC6. Currently this is set in general if an AR8337 is detected and causes issues with devices using an AR8334 (internally an AR8337, just less chip pins). And it might even cause issues with AR8337-based devices with different board designs. Swapping the MAC's however isn't needed for AR8337 in general. It's just needed in case of certain board designs (affected devices seem to be based on Atheros reference board AP135/136-010). Therefore this configuration bit should be moved to platform data. The patch includes the needed changes to the device initialization code of affected devices. Hopefully I didn't miss any .. Signed-off-by: Heiner Kallweit SVN-Revision: 45970

ar71xx: Revert "added board support for compex wpj558"

2015-02-02T10:32:04Z

This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f. Signed-off-by: John Crispin SVN-Revision: 44245