<feed xmlns='http://www.w3.org/2005/Atom'>
<title>bcm63xx/atf/plat/arm/board/fvp_ve/fvp_ve_err.c, branch master</title>
<subtitle>Broadcom-s Trusted Firmware A</subtitle>
<id>https://git.openwrt.org/project/bcm63xx/atf/atom?h=master</id>
<link rel='self' href='https://git.openwrt.org/project/bcm63xx/atf/atom?h=master'/>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/atf/'/>
<updated>2019-07-23T09:41:41Z</updated>
<entry>
<title>arm: Shorten the Firmware Update (FWU) process</title>
<updated>2019-07-23T09:41:41Z</updated>
<author>
<name>Ambroise Vincent</name>
</author>
<published>2019-07-04T13:58:45Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/atf/commit/?id=37b70031e027c76fdebe3c2d2edb2da173bcf150'/>
<id>urn:sha1:37b70031e027c76fdebe3c2d2edb2da173bcf150</id>
<content type='text'>
The watchdog is configured with a default value of 256 seconds in order
to implement the Trusted Board Boot Requirements.

For the FVP and Juno platforms, the FWU process relies on a watchdog
reset. In order to automate the test of FWU, the length of this process
needs to be as short as possible. Instead of waiting for those 4 minutes
to have a reset by the watchdog, tell it to reset immediately.

There are no side effects as the value of the watchdog's load register
resets to 0xFFFFFFFF.

Tested on Juno.

Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2
Signed-off-by: Ambroise Vincent &lt;ambroise.vincent@arm.com&gt;
</content>
</entry>
</feed>
