bcm63xx/u-boot/Kconfig, branch master

Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip

2019-06-26T13:11:27Z

Add u-boot.itb BUILD_TARGET for Rockchip platform when SPL_LOAD_FIT is being used. This can get rid of building itb explicitly with 'make u-boot.itb' so, from now all required images will build just by make. Signed-off-by: Jagan Teki Reviewed-by: Kever Yang

Merge branch 'master' of git://git.denx.de/u-boot-spi

2019-06-17T15:32:22Z

- Drop zipitz2 board (Tom) - Add DEPRECATED option (Tom) - Mark legacy or non-dm drivers as DEPRECATED (Jagan)

configs: Migrate CONFIG_SYS_LDSCRIPT to Kconfig

2019-06-14T20:10:49Z

In order to migrate this symbol to Kconfig introduce a new symbol to guard it, CONFIG_SYS_CUSTOM_LDSCRIPT. When that is set we can then provide the exact final location o the script. Signed-off-by: Tom Rini

Kconfig: Add DEPRECATED option

2019-06-13T07:21:06Z

Add a new option, CONFIG_DEPRECATED, for code that relies on deprecated functionality and has not been converted past the deadline for conversion. Signed-off-by: Tom Rini Reviewed-by: Jagan Teki

imx: Use a convenient default value for SYS_MALLOC_F_LEN

2019-06-11T08:42:48Z

Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver") causes some i.MX boards that were converted to DM, such as warp7, to fail to boot. As explained by Lukas Auer: "With the patch, U-Boot probes the drivers for devices under simple-bus device tree nodes in the pre-relocation device model. The default value of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory to do this, causing it to hang." Fix this problem by providing a convenient default value for CONFIG_SYS_MALLOC_F_LEN. Reported-by: Pierre-Jean Texier Suggested-by: Lukas Auer Signed-off-by: Fabio Estevam Tested-by: Pierre-Jean Texier Tested-by: Bryan O'Donoghue Reviewed-by: Lukas Auer Reviewed-by: Peng Fan Tested-by: Heiko Schocher

Kconfig: Fix SPL_LOAD_FIT description

2019-05-28T22:55:09Z

Both the SPL_LOAD_FIT and SPL_LOAD_FIT_FULL have the same description. Adjust the description to make it clear which one is which. Signed-off-by: Marek Vasut Cc: Tom Rini

Merge branch 'master' of git://git.denx.de/u-boot-sh

2019-05-27T00:18:20Z

- Gen3 PCIe driver + enablement on Salvator-X platforms. - Gen3 recovery SPL used to reload ATF/OpTee/U-Boot instead of minimon. - SDHI HS400 fixes ported from latest BSP and datasheet.

stm32mp1: Move config SYS_MALLOC_LEN to Kconfig

2019-05-23T09:36:46Z

This patch moves the the config SYS_MALLOC_LEN to Kconfig as it is already done for zynq arch in commit 01aa5b8f0503 ("Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq") Signed-off-by: Patrick Delaunay

ARM: rmobile: Add recovery SPL for R-Car Gen3

2019-05-21T20:15:31Z

Build an SPL which can be started via SCIF download mode on R-Car Gen3 and allows loading and executing U-Boot uImage with the next stage code. This is also useful for starting e.g. ATF BL2, which inits the hardware and returns to the U-Boot SPL, which can then load e.g. U-Boot proper. The H3, M3-W, M3-N SoCs have plenty of SRAM for storing the U-Boot SPL while the payload, e.g. ATF BL2, executes, so there is no problem here. However, E3 and D3 have much less SRAM, hence the loader uses a trick where it copies itself beyond the area used by BL2 and executes from there. That area is 32kiB large and not enough to hold U-Boot SPL, BSS, stack and malloc area, so the later two are placed at +0x4000 offset from start of SRAM, another area not used by ATF BL2. To make things even more complicated, the SCIF loader cannot load to the upper 32kiB of the SRAM directly, hence the copying approach. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu

mpc83xx: Get rid of CONFIG_83XX_CLKIN

2019-05-21T05:52:06Z

MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the system clock. To migrate the architecture, we can replace CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ. To do this * replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ * set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all MPC83xx config files Signed-off-by: Mario Six