bcm63xx/u-boot/arch/arc/dts, branch master

ARC: [plat-axs10x]: migrate to DM_MMC

2019-04-18T06:12:38Z

Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

ARC: [plat-hsdk]: migrate to DM_MMC

2019-04-18T06:12:38Z

Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

dts: switch spi-flash to jedec, spi-nor compatible

2019-04-12T05:24:27Z

There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot dts files. This compatible has been added in sf_probe, let use it. This patch switches to jedec,spi-nor when spi-flash is used in the DTS and DTSI files, and removed spi-flash when jedec,spi-nor is already present. The x86 dts are switched in a separate commit since it depends on a change in fdtdec. Signed-off-by: Neil Armstrong Acked-by: Stefan Roese Reviewed-by: Simon Goldschmidt Reviewed-by: Evgeniy Paltsev Reviewed-by: Rick Chen Reviewed-by: Patrick Delaunay Reviewed-by: Jagan Teki

emdk->emsdp: Rename board

2018-11-01T20:04:05Z

Real marketing name of the board was recently updated so to accommodate that change renaming the board and all related to it. Signed-off-by: Alexey Brodkin

arc: Add support for IoT development kit

2018-10-05T13:57:00Z

The DesignWare ARC IoT Development Kit is a versatile platform that includes the necessary hardware and software to accelerate software development and debugging of sensor fusion, voice recognition and face detection designs. More information is avaialble here [1] and here [2]. The board is based on real silicon with ARC EM9D-based Data Fusion IP Subsystem. It sports a rich set of I/O including * DW USB OTG * DW MobileStorage (used for micro SD-card) * GPIO * multiple serial interface including DW APB UART * ADC, PWM and eFlash, SRAM and SPI Flash memory * Real-Time Clock (RTC) * Bluetooth module with worldwide regulatory compliance (FCC, IC, CE, ETSI, TELEC) * On-board 9-axis sensor (gyro, accelerometer and compass) Extensible with Arduino, Pmod, mikroBUS connectors and a 2x18 extension header. One of the most interesting features for developers is built-in Digilent USB JTAG probe so only micro-USB cable is needed! [1] https://www.synopsys.com/dw/ipdir.php?ds=arc_iot_development_kit [2] https://www.synopsys.com/dw/doc.php/ds/cc/iot_dev_kit.pdf Signed-off-by: Alexey Brodkin

ARC: Add model property to boards .dts

2018-10-05T13:55:42Z

1. This way we sync with Linux kernel where we have model set for all ARC boards for quite some time, see [1] 2. Once we enable DISPLAY_BOARDINFO for ARC this info will be printed on boot givin some extra data-point about the board [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=618a9cd06dd471ac232f5b27325b24d26eba5571 Signed-off-by: Alexey Brodkin

ARC: HSDK: Fix timer frequency value

2018-09-05T15:11:45Z

CPU (and hence cpu timers) on HSDK board runs at 500MHz after preloader so fix wrong CPU frequency value in hsdk.dts Signed-off-by: Eugeniy Paltsev

AXS10x: add spi flash support

2018-07-31T04:49:47Z

AXS10x boards have n25q512 spi flash IC, so add corresponding nodes to device tree and enaple corresponding options in defconfig. Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

GPIO: CREG: improve flexibility of hsdk-creg-gpio driver

2018-07-31T04:49:47Z

CREG GPIO is a driver for weird soc-specific output ports, which are controlled by some fields in memory mapped register. Example: 31 9 7 5 0 < bit number | | | | | [ not used | gpio-1 | gpio-0 | <-shift-> ] < 32 bit register ^ ^ | | write 0x2 == set output to "1" (activate) write 0x3 == set output to "0" (deactivate) As of tooday we only support fixed (hardcoded) bit per gpio line, activate / deactivatei and shift values. Fix that by read them from device tree to be able to use this driver for other boards. Remove "hsdk" prefix from compatible string as this driver can be used with different boards like HSDK, AXS101, AXS103, etc. Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

.gitignore: move .dtb and .dtb.S patterns to the top-level .gitignore

2018-06-18T18:43:12Z

Follow Linux commit 10b62a2f785a (".gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore"). Signed-off-by: Masahiro Yamada