bcm63xx/u-boot/arch/arm/dts/Makefile, branch master

Merge tag 'rpi-next-2019.07' of https://github.com/mbgg/u-boot

2019-07-05T22:19:47Z

- fix complation error for CONFIG_USB - update RPi3 DTBs to v5.1-rc6 state - add defconfig for RPi3 B+ - Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define

wandboard: Add FIT image support

2019-07-04T12:19:49Z

After the transition to DM, only the mx6dl/solo wandboard is supported. Add FIT image support so that all the wandboard variants can be supported, like it was prior to the DM conversion. Successfully booted Linux on mx6q/solo/qp wandboards. Signed-off-by: Fabio Estevam

mx6: dts: Move dtbs under SoC level

2019-07-04T12:19:48Z

Place dtbs under SoC level rather than board level. imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were placed under the board config option, so move them to SoC level. This also aligns with the kernel dts Makefile format. Signed-off-by: Fabio Estevam

mx6: dts: Keep dtb entries sorted

2019-07-04T12:19:48Z

Keep dtb entries sorted to help adding new dtbs in an organized form. Signed-off-by: Fabio Estevam

Merge tag 'u-boot-imx-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

2019-06-28T12:00:22Z

Fixes for 2019.07 - menlo board - allow SDB on Sabre - HAB for mx6sl - apalis board

ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux

2019-06-27T12:14:23Z

Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 . Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi, the GPIO controllers need to be inited early, otherwise m53_set_clock() won't be able to detect the correct CPU clock frequency by reading the GPIO. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Stefano Babic

rockchip: dts: rk3328: add rk3328-rock64.dts

2019-06-26T13:11:26Z

rk3328-rock64.dts has been taken from Linux kernel commit cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64") with minor modifications (drop nodes not known by rk3328.dtsi). Signed-off-by: Matwey V. Kornilov Reviewed-by: Kever Yang

armv8: ls1046afrwy: Add support for LS1046AFRWY platform

2019-06-19T07:24:57Z

LS1046AFRWY board supports LS1046A family SoCs. This patch add base support for this board. Board support's 4GB ddr memory, i2c, micro-click module,microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Camelia Groza Signed-off-by: Madalin Bucur Signed-off-by: Pankit Garg Signed-off-by: Pramod Kumar Signed-off-by: Rajesh Bhagat Signed-off-by: Vabhav Sharma Reviewed-by: Prabhakar Kushwaha

fdt: update bcm283x device tree sources to Linux 5.1-rc6 state

2019-06-12T10:23:46Z

Updating the bcm283x device tree sources adds the device trees for - Raspberry Pi 3 Model A+ - Raspberry Pi 3 Model B+ - Raspberry Pi Compute Module IO board rev1 - Raspberry Pi Compute Module 3 IO board V3.0 - Raspberry Pi Zero Signed-off-by: Heinrich Schuchardt Signed-off-by: Matthias Brugger

Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-boot

2019-06-11T21:22:22Z

- Add Ethernet support for STM32MP1 - Add saveenv support for STM32MP1 - Add STM32MP1 Avenger96 board support - Add SPI driver suport for STM32MP1 - Add watchdog support for STM32MP1 - Update power supply check via USB TYPE-C for STM32MP1 discovery board