bcm63xx/u-boot/arch/arm/include/asm/arch-spear, branch master

arm: spear: fix enabling of SSP2 clock

2018-09-26T01:49:18Z

The SSP2 clock is at bit 6 in the register, so the value is 0x40 unlike the current 0x70 which enables the clock of UART2, SSP1 and SSP2. Signed-off-by: Quentin Schulz Acked-by: Stefan Roese

arm: spear: enable SSP1, 2 and 3 clocks when SPI controller driver is built

2018-09-26T01:49:18Z

SPI controllers SSP1, 2 and 3 require to enable their respective clocks. Let's enable them only when the SPI controller driver is built. Signed-off-by: Quentin Schulz

arm: spear: enable GPIO3 and 4 clocks when the GPIO controller driver is built

2018-09-11T01:19:32Z

There are multiple GPIOs that can be used with the same driver depending on the CONFIG_GPIO_BASE defined in the controller driver. GPIO3 and 4 require a clock to be enabled so let's enable them when the driver is built. Signed-off-by: Quentin Schulz

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

spear: fix STMicroelectronics copyright

2017-11-06T14:51:01Z

Uniformize STMicroelectronics copyrights headers for SPEAR related code. Signed-off-by: Patrice Chotard

arm: spear: Add command to switch between 1-bit HW ECC and SW BCH4

2015-09-11T21:15:14Z

This patch adds the "nandecc" command to switch between the SPEAr600 internal 1-bit HW ECC and the 4-bit SW BCH4 ECC. This can be needed to support NAND chips with a stronger ECC than 1-bit, as on the x600. And to dynamically switch between both ECC schemes for backwards compatibility. Signed-off-by: Stefan Roese Cc: Viresh Kumar Acked-by: Viresh Kumar

arm: spear: Move to common SPL infrastructure

2015-08-28T16:33:16Z

The SPL implementation for SPEAr600 is older than the common SPL infrastructure. This patch now moves the SPEAr600 SPL over to the common SPL code. Tested on the only SPEAr board that currently uses SPL in mainline U-Boot, the x600. Signed-off-by: Stefan Roese Acked-by: Viresh Kumar Cc: Vipin Kumar

usb: spear: Add support for both SPEAr600 EHCI controllers

2015-08-19T20:30:20Z

USB EHCI on SPEAr600 has not been tested for a while. The base controller addresses are missing. This patch adds the defines to the header. And adds the missing code. Signed-off-by: Stefan Roese Cc: Viresh Kumar Cc: Vipin Kumar Cc: Marek Vasut

spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs

2014-02-20T05:49:02Z

Having CONFIG_SYS_I2C_BASE requires DW I2C driver to explicitly include which other platforms may not have at all. It's always good to have a driver platform-independent. Signed-off-by: Alexey Brodkin Cc: Tom Rini Cc: Heiko Schocher Cc: Stefan Roese Cc: Vipin Kumar Cc: Armando Visconti

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini