bcm63xx/u-boot/arch/arm/include/asm/omap_common.h, branch master

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

board: ti: am574x-idk: Add hw data support

2018-01-19T20:49:26Z

Update prcm, voltages and pinmux support for am574x-idk. Signed-off-by: Lokesh Vutla

arm: dra762: Add support for device package identification

2018-01-19T20:49:26Z

DRA762 comes in two packages: - ABZ: Pin compatible package with DRA742 with DDR@1333MHz - ACD: High performance(OPP_PLUS) package with new IPs Both the above packages uses the same IDCODE hence needs to differentiate using package information in DIE_ID_2. Add support for the same. Also update clock, ddr, emif information. Signed-off-by: Lokesh Vutla

ARM: DRA72x: Add support for detection of DRA71x SR 2.1

2017-09-12T22:02:29Z

DRA71x processors are reduced pin and software compatible derivative of DRA72 processors. Add support for detection of SR2.1 version of DRA71x family of processors. Signed-off-by: Vishal Mahaveer Reviewed-by: Lokesh Vutla

board: ti: am571x: Add 666MHz support for AM571x IDK

2017-09-11T20:22:31Z

AM571x supports DDR running at 666MHz. Right now it is clocked at 532MHz which is lower than what is supported. In order to have maximum performance on AM571-IDK, switch DDR to 666MHz. Signed-off-by: Steve Kipisz Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini

board: ti: dra76-evm: Add the pmic data

2017-09-11T20:19:40Z

dra76-evm uses lp8736 and tps65917 pmic for powering on various peripherals. Add data for these pmics and register for dra76-evm. Reviewed-by: Tom Rini Signed-off-by: Keerthy Signed-off-by: Lokesh Vutla

arm: dra76: Add support for ES1.0 detection

2017-09-11T20:19:38Z

dra76 family is a high-performance, infotainment application device, based on OMAP architecture on a 28-nm technology. This contains most of the subsystems, peripherals that are available on dra74, dra72 family. This SoC mainly features Subsystems: - 2 x Cortex-A15 with max speed of 1.8GHz - 2 X DSP - 2 X Cortex-M4 IPU - ISS - CAL - DSS - VPE - VIP Connectivity peripherals: - 1 USB3.0 and 3 USB2.0 subsystems - 1 x SATA - 2 x PCI Express Gen2 - 3-port Gigabit ethernet switch - 2 x CAN - MCAN Adding CPU detection support for the dra76 ES1.0 soc and update prcm, control module, dplls data. Reviewed-by: Tom Rini Signed-off-by: Praneeth Bajjuri Signed-off-by: Lokesh Vutla

arm: mach-omap2: Factor out common FDT fixup suport

2017-07-23T02:22:43Z

Some of the fixups currently done for OMAP5 class boards are common to other OMAP family devices, move these to fdt-common.c. Signed-off-by: Andrew F. Davis

omap: Add routine for setting fastboot variables

2017-06-12T12:36:21Z

This patch reuses new option, which allows us to expose variables from environment to "fastboot getvar" command. Those variables must be of "fastboot.%s" format. Signed-off-by: Sam Protsenko

arm: omap: Unify get_device_type() function

2017-06-10T00:34:53Z

Refactor OMAP3/4/5 code so that we have only one get_device_type() function for all platforms. Details: - Add ctrl variable for AM33xx and OMAP3 platforms (like it's done for OMAP4/5), so we can obtain status register in common way - For now ctrl structure for AM33xx/OMAP3 contains only status register address - Run hw_data_init() in order to assign ctrl to proper structure - Remove DEVICE_MASK and DEVICE_GP definitions as they are not used (DEVICE_TYPE_MASK and GP_DEVICE are used instead) - Guard structs in omap_common.h with #ifdefs, because otherwise including omap_common.h on non-omap4/5 board files breaks compilation Buildman script was run for all OMAP boards. Result output: arm: (for 38/616 boards) all +352.5 bss -1.4 data +3.5 rodata +300.0 spl/u-boot-spl:all +284.7 spl/u-boot-spl:data +2.2 spl/u-boot-spl:rodata +252.0 spl/u-boot-spl:text +30.5 text +50.4 (no errors to report) Tested on AM57x EVM and BeagleBoard xM. Signed-off-by: Sam Protsenko Reviewed-by: Lokesh Vutla [trini: Rework the guards as to not break TI81xx] Signed-off-by: Tom Rini